Redis报错:protected mode is enabled

解决Redis保护模式问题

(error) DENIED Redis is running in protected mode because protected mode is enabled

  • Redis protected-mode 是3.2 之后加入的新特性,在Redis.conf的注释中,我们可以了解到,他的具体作用和启用条件

链接redis 时只能通过本地localhost (127.0.0.1)这个来链接,而不能用网络ip(192.168..)这个链接,问题然如果用网络ip 链接会报以下的错误:

(error) DENIED Redis is running in protected mode because protected mode is enabled, no bind address was specified, no authentication password is requested to clients. In this mode connections are only accepted from the lookback interface. If you want to connect from external computers to Redis you may adopt one of the following solutions: 1) Just disable protected mode sending the command 'CONFIG SET protected-mode no' from the loopback interface by connecting to Redis from the same host the server is running, however MAKE SURE Redis is not publicly accessible from internet if you do so. Use CONFIG REWRITE to make this change permanent. 2) Alternatively you can just disable the protected mode by editing the Redis configuration file, and setting the protected mode option to 'no', and then restarting the server. 3) If you started the server manually just for testing, restart it with the --portected-mode no option. 4) Setup a bind address or an authentication password. NOTE: You only need to do one of the above things in order for the server to start accepting connections from the outside.
  • 1

是说处于保护模式,只能本地链接,我们需要修改配置文件../redis.conf
1)打开配置文件把下面对应的注释掉

# bind 127.0.0.1 
  • 1

2)Redis默认不是以守护进程的方式运行,可以通过该配置项修改,使用yes启用守护进程,设置为no

daemonize no
  • 1

3)保护模式

protected-mode no 
  • 1

4)最后关键的是:
没反应应该是你启动服务端的时候没有带上配置文件。你可以./redis-server redis.conf
你配置好了,但要重新启动redis,如果还是报一样的错误,很可能是没有启动到配置文件,所以需要真正的和配置文件启动需要:
在redis.conf文件的当前目录下:

$ redis-server redis.conf
  • 1

如果还是所某个端口已在使用,那么可能是有 后台程序在占用该端口,需要kill 掉该程序,重新带上配置文件。./redis-server redis.conf启动。
将含有”redis”关键词的进程杀死:

$ ps -ef | <span class="hljs-keyword">grep</span> redis | awk ‘{<span class="hljs-keyword">print</span> <span class="hljs-variable">$2}’ | xargs kill -9
  • 1

我的问题就是这个步骤解决的,祝好。

        <link rel="stylesheet" href="https://csdnimg.cn/release/phoenix/template/css/markdown_views-ea0013b516.css">
            </div>
<think>好的,用户遇到了Redis在保护模式下导致AUTH失败的问题,我需要帮他找到解决方案。首先,我得回忆一下Redis的保护模式是什么。保护模式是Redis的一种安全机制,默认开启,当没有设置密码且没有绑定到本地接口时,只允许本地连接。如果用户尝试从外部连接而没有配置密码,就会触发保护模式,导致AUTH失败。 接下来,我需要列出可能的解决方案。首先,检查是否启用了保护模式,用户可以通过查看redis.conf中的protected-mode设置。如果用户确实需要从外部访问,应该设置密码,即配置requirepass,并在连接时使用AUTH命令。另外,绑定地址可能需要调整,如果用户想让Redis监听所有接口,需要将bind设置为0.0.0.0或者注释掉,但要注意这样可能存在安全风险,最好配合密码使用。还有,关闭保护模式可能是一个临时解决方案,但不推荐,因为这降低了安全性。 然后,用户可能需要重启Redis服务使配置生效,或者通过命令行临时修改配置。需要注意的是,直接关闭保护模式而不设置密码会让实例暴露在风险中,所以必须强调设置密码的重要性。 另外,用户可能的问题还包括配置文件的路径是否正确,是否有权限修改,以及如何正确应用配置更改。需要提醒用户检查这些方面,避免配置未生效的情况。同时,生成相关问题时,要考虑用户可能进一步的问题,比如如何验证配置是否生效,或者如何测试连接是否成功,以及如何永久保存配置变更等。</think>### Redis保护模式导致AUTH失败的解决方案 当Redis显示`DENIED Redis is running in protected mode`错误时,表明其安全机制阻止了未经认证的外部访问。以下是分步解决方案: #### 1. 启用密码认证(推荐) 修改Redis配置文件`redis.conf`: ```bash # 设置访问密码(替换yourpassword) requirepass yourpassword # 保持保护模式开启(默认protected-mode yes) protected-mode yes ``` 客户端连接时需携带密码: ```bash redis-cli -h your_host -p 6379 -a yourpassword # 或手动认证 AUTH yourpassword ``` #### 2. 绑定网络接口(可选) 若需开放外部访问,需同时: ```bash # 注释本地绑定或添加服务器IP # bind 127.0.0.1 bind 0.0.0.0 # 仍需设置密码保证安全 requirepass yourpassword ``` #### 3. 临时禁用保护模式(仅测试用) 通过命令行临时修改(重启失效): ```bash redis-cli CONFIG SET protected-mode no ``` ⚠️ 警告:此操作将使Redis暴露在公网风险中,必须配合防火墙规则使用 #### 操作后必做步骤 ```bash # 重启Redis服务使配置生效 sudo systemctl restart redis-server # 验证保护模式状态 redis-cli CONFIG GET protected-mode ``` ### 配置验证流程图 ``` [修改redis.conf] → [设置requirepass] → [调整bind地址] → [重启服务] → [客户端带密码连接] ```
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值