本文介绍如何在Linux系统中通过编辑/etc/network/interfaces文件来配置静态网络参数，包括设置IP地址、子网掩码、网关和DNS服务器。同时，提供了重启网络服务和检查网络配置的命令，确保配置正确并生效。
vi /etc/network/interfaces
修改以下内容：
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
iface eth0 inet manual
auto pnet0
iface pnet0 inet static
bridge_ports eth0
bridge_stp off
address 192.168.0.212
netmask 255.255.0.0
gateway 192.168.0.1
dns-nameserver 114.114.114.114
然后重启网卡生效
/etc/init.d/networking restart
ip a
systemctl restart network
ifdown pnet0
ifup pnet1
ifup pnet0
ip a
-----------------------------------------------------------------------------------------------------
route -en
ip a
ping 10.50.0.1
vim /etc/network/interfaces
ifdown pnet0
ifup pnet0
reboot
vim /etc/network/interfaces
route -n
ip a 1 pnet0
扫一扫
1048
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
