Linux(Centos 7.6)网卡信息没有了问题处理

原创已于 2024-12-29 20:48:55 修改 · 1.1k 阅读

0 ·

CC 4.0 BY-SA版权

文章标签：

#linux #centos #运维

于 2024-12-29 20:42:58 首次发布

Linux问题处理专栏收录该内容

3 篇文章

订阅专栏

1.问题现象

虚拟机打开后，使用ifconfig查看IP信息，虚拟机默认的网卡名称是ens33，ifconfig没有看到相关问题，远程连接工具Xshell也不能正常访问该虚拟机。

[root@node1 ~]# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:47:f9:45  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

2.解决方法

重启网络相关服务。

[root@node1 ~]# systemctl restart NetworkManager
[root@node1 ~]# systemctl restart network.service

重启网络相关服务后ifconfig查看网络信息如下，可以正常连接。

[root@node1 ~]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.118.128  netmask 255.255.255.0  broadcast 192.168.100.255
        inet6 fe80::20c:29ff:feda:ad2d  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:da:ad:2d  txqueuelen 1000  (Ethernet)
        RX packets 10  bytes 1112 (1.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 19  bytes 3529 (3.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:47:f9:45  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@node1 ~]#