墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
800+累计阅读
819平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
在编程中，经常需要将日期对象转换为字符串形式进行显示或处理。使用jQuery，我们可以轻松地将日期对象转换为字符串。以下是使用jQuery将日期转换为字符串的方法：
步骤1：获取日期对象
首先，我们需要获取日期对象。可以使用JavaScript的Date对象来表示日期和时间。以下是获取当前日期对象的代码：
var currentDate = new Date();
步骤2：使用jQuery将日期转换为字符串
接下来，我们可以使用jQuery的$.datepicker.formatDate()方法将日期对象转换为字符串。该方法需要两个参数：日期格式和要转换的日期对象。以下是一个示例代码：
var dateString = $WRF替换静态地理数据中的土地利用数据（WRF替换下垫面数据）
在进行自己的WRF项目模拟的时候，因为需要用中国土地利用数据替换WRF内嵌老旧的土地利用数据，故需要将土地利用进行替换。我使用的中国的土地利用数据是来自中国土地利用数据（1980-2015）。其中我以下载的lucc1980为例进行演示。 1、坐标转换 （1）下载的lucc1980数据如下图所示： （2）在ArcMap中打开如下图所示： 打开属性表可以看到，lucc1980的坐标系为投影坐标系Krasovsky_1940_Albers，数据格式为GRID。这里需要将投影坐标系转换成地理坐
从零开始：使用Mask2Former训练你的专属数据集
本文详细介绍了如何从零开始使用Mask2Former训练自定义数据集。内容涵盖环境搭建、数据准备（将LabelMe格式转换为COCO格式）、数据集注册与模型配置、训练启动与调试，以及最终的模型推理与应用。通过实战步骤和常见问题解决方案，帮助读者掌握使用Mask2Former进行实例分割的核心流程，实现专属模型的训练与部署。
ODrive0.5.5源码分析(1) ADC的处理
odrive 0.5.5 ADC
果蔬及菜品识别系统
果蔬及菜品识别系统
机器学习系列(1)_逻辑回归初步
1、总述 逻辑回归是应用非常广泛的一个分类机器学习算法，它将数据拟合到一个logit函数(或者叫做logistic函数)中，从而能够完成对事件发生的概率进行预测。 2、由来 要说逻辑回归，我们得追溯到线性回归，想必大家对线性回归都有一定的了解，即对于多维空间中存在的样本点，我们用特征的线性组合去拟合空间中点的分布和轨迹。如下图所示： 线性回归能对连续值结果进行预测，
五、MT8168 音频驱动之SPEAKER
本章主要讲解MT8168平台的内部SPEAKER驱动配置。分为HP接法和LINE OUT接法。2.1.3 audio_custom_exp.h设置。2.1.4 mixer_paths.xml设置。2.2.3 mixer_paths.xml设置。2.1.2 ProjectConfig 设置。2.2.2 ProjectConfig 设置。2.2.1 deconfig设置。2.1.1 DTS设置。......
MIPI D-PHY IP 使用说明（一）
目录 前言 一、IP 特点 二、IP 可用性 三、IP 总览 四、IP 声明 五、IP 结构 六、IP 分流桥 模式 七、端口描述 1、PPI 接口信号 1、常规 PPI控制信号 2、发送模式 时钟通道 高速 PPI 信号 3、发送模式 时钟通道 逃逸模式PPI 信号 4、发送模式 数据通道 高速 PPI 信号 5、发送模式 数据通道 控制接口PPI 信号 6、发送模式 ...
YOLOv8改进，YOLOv8添加DCNv3可变性卷积，无需编译
DCNv3在DCNv2版本上进行了改进，上一期我们在YOLOv8中添加了DCNv2，这一期我们将添加DCNv3，DCNv3代码详解可以参考链接:代码详解——可变形卷积（DCNv3）
计算机控制技术及应用
《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术，以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索，主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式，计算机控制系统的数学描述与基本分析方法，以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
假人有限元模型
假人模型，车辆碰撞假人有限元模型，适合做乘员安全的研究者利用
IMSL CNL 7.0.0 (x86-64)Crack
IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件，这是C++版本的破解文件
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
1万+
扫一扫
