3GPP TS 36.331 ASN.1消息中Optional的含义

本文解析了无线通信中用于指定字段是否需要存在的四种标记:条件性存在、可选存在、可选存在不采取行动及可选存在并释放。详细介绍了每种标记的含义及其在UE行为中的应用。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Table 6.1-1: Meaning of abbreviations used tospecify the need for fields to be present

Abbreviation

Meaning

Cond conditionTag[u1] 

(Used in downlink only)

Conditionally present

A field for which the need is specified by means of conditions. For each conditionTag, the need is specified in a tabular form following the ASN.1 segment. In case, according to the conditions, a field is not present, the UE takes no action and where applicable shall continue to use the existing value (and/ or the associated functionality) unless explicitly stated otherwise (e.g. in the conditional presence table or in the description of the field itself).

Need OP[u2] 

(Used in downlink only)

Optionally present

A field that is optional to signal. For downlink messages, the UE is not required to take any special action on absence of the field beyond what is specified in the procedural text or the field description table following the ASN.1 segment. The UE behaviour on absence should be captured either in the procedural text or in the field description.

Need ON[u3] 

(Used in downlink only)

Optionally present, No action

A field that is optional to signal. If the message is received by the UE, and in case the field is absent, the UE takes no action and where applicable shall continue to use the existing value (and/ or the associated functionality).

Need OR[u4] 

(Used in downlink only)

Optionally present, Release

A field that is optional to signal. If the message is received by the UE, and in case the field is absent, the UE shall discontinue/ stop using/ delete any existing value (and/ or the associated functionality).


 [u1]基于某种条件,如果不出现,UE不做相关的操作、或按已有的配置继续使用,除非特别说明。

 [u2]如果不出现,就按照流程的描述或字段描述表格处理。

 [u3]如果不出现,UE不做处理并且继续使用已有的值。

 [u4]如果不出现,UE中止/停止使用/删除原有的值或相关的功能。

value DL-DCCH-Message ::= { message c1 : rrcConnectionReconfiguration : { rrc-TransactionIdentifier 2, criticalExtensions c1 : rrcConnectionReconfiguration-r8 : { mobilityControlInfo { targetPhysCellId 296, carrierFreq { dl-CarrierFreq 39098 }, additionalSpectrumEmission 1, t304 ms1000, newUE-Identity '01100111 00001101'B, radioResourceConfigCommon { prach-Config { rootSequenceIndex 658, prach-ConfigInfo { prach-ConfigIndex 3, highSpeedFlag FALSE, zeroCorrelationZoneConfig 8, prach-FreqOffset 9 } }, pusch-ConfigCommon { pusch-ConfigBasic { n-SB 4, hoppingMode interSubFrame, pusch-HoppingOffset 22, enable64QAM TRUE }, ul-ReferenceSignalsPUSCH { groupHoppingEnabled FALSE, groupAssignmentPUSCH 0, sequenceHoppingEnabled FALSE, cyclicShift 0 } }, pucch-ConfigCommon { deltaPUCCH-Shift ds1, nRB-CQI 4, nCS-AN 0, n1PUCCH-AN 72 }, uplinkPowerControlCommon { p0-NominalPUSCH -67, alpha al07, p0-NominalPUCCH -105, deltaFList-PUCCH { deltaF-PUCCH-Format1 deltaF0, deltaF-PUCCH-Format1b deltaF3, deltaF-PUCCH-Format2 deltaF1, deltaF-PUCCH-Format2a deltaF2, deltaF-PUCCH-Format2b deltaF2 }, deltaPreambleMsg3 4 }, tdd-Config { subframeAssignment sa2, specialSubframePatterns ssp6 }, ul-CyclicPrefixLength len1, uplinkPowerControlCommon-v1020 { deltaF-PUCCH-Format3-r10 deltaF1, deltaF-PUCCH-Format1bCS-r10 deltaF2 }, pusch-ConfigCommon-v1270 { enable64QAM-v1270 true } }, rach-ConfigDedicated { ra-PreambleIndex 63, ra-PRACH-MaskIndex 0 } }, radioResourceConfigDedicated { mac-MainConfig explicitValue : { ul-SCH-Config { maxHARQ-Tx n5, periodicBSR-Timer sf10, retxBSR-Timer sf320, ttiBundling FALSE }, timeAlignmentTimerDedicated infinity, phr-Config setup : { periodicPHR-Timer sf100, prohibitPHR-Timer sf10, dl-PathlossChange dB3 }, mac-MainConfig-v1020 { extendedBSR-Sizes-r10 setup, extendedPHR-r10 setup } }, physicalConfigDedicated { pucch-ConfigDedicated { ackNackRepetition release : NULL }, uplinkPowerControlDedicated { p0-UE-PUSCH 0, deltaMCS-Enabled en0, accumulationEnabled TRUE, p0-UE-PUCCH 0, pSRS-Offset 5, filterCoefficient fc6 }, tpc-PDCCH-ConfigPUCCH setup : { tpc-RNTI '00001001 11000100'B, tpc-Index indexOfFormat3 : 4 }, cqi-ReportConfig { nomPDSCH-RS-EPRE-Offset 0, cqi-ReportPeriodic release : NULL }, soundingRS-UL-ConfigDedicated setup : { srs-Bandwidth bw2, srs-HoppingBandwidth hbw0, freqDomainPosition 12, duration TRUE, srs-ConfigIndex 15, transmissionComb 1, cyclicShift cs0 }, antennaInfo explicitValue : { transmissionMode tm2, ue-TransmitAntennaSelection setup : openLoop }, schedulingRequestConfig setup : { sr-PUCCH-ResourceIndex 0, sr-ConfigIndex 12, dsr-TransMax n64 }, csi-RS-Config-r10 { csi-RS-r10 release : NULL }, pucch-ConfigDedicated-v1020 { pucch-Format-r10 format3-r10 : { n3PUCCH-AN-List-r10 { 10, 11, 12, 13 } } } } }, securityConfigHO { handoverType intraLTE : { keyChangeIndicator FALSE, nextHopChainingCount 0 } }, nonCriticalExtension { nonCriticalExtension { nonCriticalExtension { sCellToAddModList-r10 { { sCellIndex-r10 1, cellIdentification-r10 { physCellId-r10 296, dl-CarrierFreq-r10 39296 }, radioResourceConfigCommonSCell-r10 { nonUL-Configuration-r10 { dl-Bandwidth-r10 n100, antennaInfoCommon-r10 { antennaPortsCount an2 }, phich-Config-r10 { phich-Duration normal, phich-Resource one }, pdsch-ConfigCommon-r10 { referenceSignalPower 15, p-b 1 }, tdd-Config-r10 { subframeAssignment sa2, specialSubframePatterns ssp6 } },
最新发布
05-14
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值