item_get - 根据ID取慧聪网商品详情

蜗牛S666墙面漆介绍
蜗牛S666超级丝绸墙面漆是一款环保内墙涂料,具有防水透气、防霉抗藻等特点,适用于内墙装饰。该产品耐擦洗超过10000次,采用先进匀光技术,光泽均匀,漆膜细腻丰满。

item_get - 根据ID取慧聪网商品详情

在这里插入图片描述

测试网址:点击注册测试

{
	"item": {
		"num_iid": "699411502",
		"title": "供应蜗牛S666丝绸丝光耐擦环保墙面漆儿童房漆 净味墙面漆 净味丝光墙面漆",
		"desc_short": "供应总量 100000  桶 发货期限 卖家承诺72小时发货",
		"price": "578 - 598",
		"nick": "佛山市蜗牛化工有限公司",
		"num": "100000",
		"detail_url": "https://b2b.hc360.com/supplyself/699411502.html",
		"pic_url": "http://img000.hc360.cn/k3/M0C/23/CF/wKhQv1vAFyeETg6yAAAAAI7CAf4875.jpg",
		"location": "广东省 佛山市",
		"props": {
			"产地": "广东",
			"供货地": "全国各地",
			"保质期": "36个月",
			"功能": "装饰",
			"包装": "桶装",
			"单件净重": "6KG",
			"品牌": "蜗牛",
			"外观": "白色",
			"干燥时间": "24h",
			"成膜物性质": "有机无机复合",
			"按溶剂类型分": "乳胶漆",
			"施工性": "优",
			"每公斤涂刷面积(两遍)": "5-6平方/2遍",
			"液态类型": "水乳型",
			"理论使用年限": "15年",
			"用途": "装饰",
			"稀释剂": "水溶性",
			"类型": "丙烯酸防腐涂料",
			"级别": "优等品",
			"耐水性": "超强",
			"耐洗擦性": "10000次",
			"耐碱性": "强",
			"表干时间": "0.5小时",
			"遮盖力": "强",
			"颜色": "白色可调色"
		},
		"min_num": "10-49",
		"priceRange": [
			[
				"10-49",
				"598"
			],
			[
				"50-99",
				"588"
			],
			[
				"≥ 100",
				"578"
			]
		],
		"item_imgs": [
			{
				"url": "http://img000.hc360.cn/k3/M0C/23/CF/wKhQv1vAFyeETg6yAAAAAI7CAf4875.jpg"
			}
		],
		"desc": "<div id=\"introduce\"><div data-url=\"https://laputa./offer/ajax/OfferDesc.do\" data-tfs-url=\"https://img.alicdn.com/tfscom/TB1nEKRsnJYBeNjy1zeXXahzVXa\" data-enable=\"true\">\n    <p style=\"margin:0px;padding:0px;line-height:1.5;clear:both;\">\n        <br>\n    </p>\n    <p data-spm-anchor-id=\"a261y.7663282.descBanner.i0.5abb2e79zMSdtk\">\n        S666六六顺超级丝绸环保墙面漆是一款配合美好生活设计的内墙涂料,采用先进的匀光技术,光泽均匀、漆膜细腻丰满、防水透气、防霉抗藻、耐擦洗、保色性好,用于内墙装饰,尽显居室个性的非凡品位。<br>\n<br>\n技术参数:<br>\n稀释比(体积比):漆∶水=1∶20~30%<br>\n涂刷面积(理论值):11~14m2/ L/遍<br>\n颜色:白色可调色(蜗牛千色卡)<br>\n重涂时间:30分钟(25℃,以指触干为准)<br>\n白度:&gt;95<br>\n耐擦洗:&gt;10000次<br>\n光泽:丝光<br>\n产品特点:<br>\n1、采用先进匀光技术。<br>\n2、漆膜细腻,流平性优。<br>\n3、防水透气。<br>\n4、防霉、抗藻,耐酸碱。<br>\n5、耐擦洗次数高,可一洗再洗,漆膜表面光洁如初。<br>\n6、漆膜丰满,遮盖力强。<br>\n7、为中国环境标志认证产品,请求放心使用。<br>\n涂装体系\n    </p>\n    <p data-spm-anchor-id=\"a261y.7663282.descBanner.i1.5abb2e79zMSdtk\">\n        蜗牛内墙全能抗碱底漆1层<br>\n蜗牛六六顺超级丝绸环保乳胶漆2遍<br>\n施工说明:<br>\n表面处理:涂装表面必须坚固、洁净、无粉尘,确保没有渗水现象。<br>\n新墙面:新水泥墙面至少保养1个月,冬季7周以上,确保PH值在7-9之间,含水率小于10%进才可批刮腻子,对于松脱物及结晶盐,可用铲刀清除。对于裂纹,可视裂纹大小、深浅作修补,裂纹较大时用碎石嵌入裂缝后用腻子批刮好;裂纹较小时用腻子直接批刮即可。<br>\n旧墙面:对于粉刷过的旧墙重涂时,请用高压水冲洗或用铲刀铲除松脱的漆膜;对于霉菌或藻类物质,可用砂纸或铲刀清除,还可用洗霉水刷1遍后用清水洗净;对于裂纹或缺陷,可用腻子进行补平。<br>\n注意事项:<br>\n1、 开罐后请充分搅拌罐内漆液,施工间隙应盖紧罐盖,以防涂料结皮,已稀释的漆液不要倒回原包装内。<br>\n2、 冬季施工时,重涂时间请适当延长;对于墙面,冬季晾置时间应适当延长,以防碱性物质析出,侵蚀墙面。<br>\n3、 温度低于10℃相对湿度大于85%时请勿施工。<br>\n4、 施工时请配套使用公司的底漆和面漆。\n    </p>\n    <p style=\"margin:0px;padding:0px;line-height:1.5;clear:both;\">\n        <br>\n    </p>\n</div></div>",
		"seller_info": {
			"zhuy": "https://snailpaint.b2b.hc360.com/shop/mmtdocs.html",
			"title": "佛山市蜗牛化工有限公司",
			"shop_name": "佛山市蜗牛化工有限公司",
			"nick": "佛山市蜗牛化工有限公司",
			"user_num_id": "snailpaint"
		},
		"props_img": [],
		"sales": 0,
		"desc_img": [],
		"shop_item": [],
		"relate_items": []
	},
	"secache": "6c4963f627149dff4f9d51b186bc77f1",
	"secache_time": 1603070916,
	"secache_date": "2020-10-19 09:28:36",
	"translate_status": "",
	"translate_time": 0,
	"language": {
		"default_lang": "cn",
		"current_lang": "cn"
	},
	"error": "",
	"reason": "",
	"error_code": "0000",
	"cache": 0,
	"api_info": "today: max:",
	"execution_time": 0.984,
	"server_time": "Beijing/2020-10-19 09:28:36",
	"call_args": {
		"num_iid": "699411502"
	},
	"api_type": "hc360",
	"translate_language": "zh-CN",
	"translate_engine": "google_cn",
	"server_memory": "2.59MB",
	"request_id": "15f8cebc36e6aa"
}
// #ifdef OPLUS_FEATURE_POWERINFO_FTM 1333 /* ChaoYing.Chen@BSP.Factory.AT, 2017/11/14, Add for oplus AT test */ 1334 static char* oplus_ftm_item_entry_cb(at_cmd *test_item_struct, char* test_result) 1335 { 1336 item_t *items; 1337 struct ftm_module *mod; 1338 struct ftm_param param; 1339 int item_id = 0, i = 0; 1340 char result[3][16] = {"NOT TEST", "OK", "FAIL"}; 1341 1342 LOGD(TAG "Entry %s\n", __FUNCTION__); 1343 1344 if((test_item_struct == NULL) || (test_result == NULL)) 1345 { 1346 return NULL; 1347 } 1348 1349 items = get_item_list(); 1350 item_id = oplus_cmd_hdlr[test_item_struct->index].item_id; 1351 1352 mod = ftm_get_module(item_id); 1353 if (!mod) { 1354 LOGD(TAG "can't find this module\n"); 1355 return NULL; 1356 } 1357 //item_testing = 1; 1358 if (mod && mod->visible) 1359 { 1360 LOGD(TAG "Before ftm_entry()\n"); 1361 param.name = get_item_name(items, item_id); 1362 param.test_type = test_item_struct->test_type; 1363 ftm_entry(item_id, &param); 1364 } 1365 1366 LOGD(TAG "oplus cmd_hdlr[index].item_id=%d, item_str:%s\n", 1367 item_id, 1368 oplus_cmd_hdlr[test_item_struct->index].cmd_string); 1369 1370 strcpy(test_result, result[mod->test_result]); 1371 if (return_data.common.id == mod->id){ 1372 // compatible with the current test 1373 if (mod->id != ITEM_EADC 1374 && mod->id != ITEM_GET_EMMC 1375 && mod->id != ITEM_GET_CPU 1376 && mod->id != ITEM_GET_DDR 1377 && mod->id != ITEM_DOWNLOAD_STATUS_CHECK 1378 && mod->id != ITEM_LCDSN 1379 && mod->id != ITEM_OLEDSN 1380 && mod->id != ITEM_SECUREBOOT_TEST) 1381 { 1382 strcat(test_result, ": "); 1383 } 1384 1385 strcat(test_result, return_data.common.resut_info); 1386 strcat(test_result, "\r\n"); 1387 } 1388 else{ 1389 strcat(test_result, "\r\n"); 1390 } 1391 1392 1393 LOGD(TAG "result[mod->test_result]=%s\n", result[mod->test_result]); 1394 1395 return test_result; 1396 }
08-01
以下是对你提供的 C 函数 `oplus_ftm_item_entry_cb` 的完整解析,包括代码逐行解释、功能逻辑、潜在问题分析、改进建议,以及相关知识点。 --- ## 📌 函数功能概述 该函数是 **工厂测试模式**(FTM)中一个通用的 AT 命令回调函数,用于: - 根据传入的测试项结构体(`at_cmd`)获对应的测试模块(`ftm_module`)。 - 调用该模块的入口函数 `ftm_entry` 执行测试逻辑。 - 将测试结果(如 `OK`、`FAIL`、`NOT TEST`)拼接成字符串返回给调用者(通常是串口 AT 命令的响应)。 --- ## 🔍 代码逐行解析 ```c static char* oplus_ftm_item_entry_cb(at_cmd *test_item_struct, char* test_result) { item_t *items; struct ftm_module *mod; struct ftm_param param; int item_id = 0, i = 0; char result[3][16] = {"NOT TEST", "OK", "FAIL"}; ``` - 定义局部变量: - `items`: 用于保存测试项列表。 - `mod`: FTM 测试模块指针。 - `param`: 传递给 `ftm_entry` 的参数。 - `result`: 结果字符串数组。 ```c LOGD(TAG "Entry %s\n", __FUNCTION__); ``` - 打印调试日志,记录进入函数名。 ```c if((test_item_struct == NULL) || (test_result == NULL)) { return NULL; } ``` - 空指针检查,防止非法访问。 ```c items = get_item_list(); item_id = oplus_cmd_hdlr[test_item_struct->index].item_id; ``` -全局测试项列表。 - 从 `oplus_cmd_hdlr` 中根据索引获对应的测试项 ID。 ```c mod = ftm_get_module(item_id); if (!mod) { LOGD(TAG "can't find this module\n"); return NULL; } ``` - 根据 `item_id` 获 FTM 模块。 - 如果找不到模块,打印日志并返回 NULL。 ```c if (mod && mod->visible) { LOGD(TAG "Before ftm_entry()\n"); param.name = get_item_name(items, item_id); param.test_type = test_item_struct->test_type; ftm_entry(item_id, &param); } ``` - 如果模块存在且可见,调用 `ftm_entry` 执行模块的测试逻辑。 - `param.name`: 模块名称。 - `param.test_type`: 测试类型,如单次测试、循环测试等。 ```c LOGD(TAG "oplus cmd_hdlr[index].item_id=%d, item_str:%s\n", item_id, oplus_cmd_hdlr[test_item_struct->index].cmd_string); ``` - 打印当前测试项 ID 和对应的 AT 命令字符串。 ```c strcpy(test_result, result[mod->test_result]); ``` - 将模块的测试结果(`NOT TEST`、`OK`、`FAIL`)复制到输出缓冲区。 ```c if (return_data.common.id == mod->id){ if (mod->id != ITEM_EADC && mod->id != ITEM_GET_EMMC && mod->id != ITEM_GET_CPU && mod->id != ITEM_GET_DDR && mod->id != ITEM_DOWNLOAD_STATUS_CHECK && mod->id != ITEM_LCDSN && mod->id != ITEM_OLEDSN && mod->id != ITEM_SECUREBOOT_TEST) { strcat(test_result, ": "); } strcat(test_result, return_data.common.resut_info); strcat(test_result, "\r\n"); } else{ strcat(test_result, "\r\n"); } ``` - 如果模块 ID 与全局变量 `return_data` 中的模块 ID 匹配,则拼接详细信息。 - 对某些模块(如 `ITEM_EADC`)不加 `": "`,保持格式简洁。 - **注意:`resut_info` 拼写错误,应为 `result_info`。** ```c LOGD(TAG "result[mod->test_result]=%s\n", result[mod->test_result]); return test_result; } ``` - 打印最终测试结果。 - 返回 `test_result`,供上层函数使用。 --- ## 🧠 潜在问题与改进建议 ### ⚠️ 拼写错误 ```c strcat(test_result, return_data.common.resut_info); ``` 应为: ```c strcat(test_result, return_data.common.result_info); ``` --- ### ⚠️ 使用全局变量 `return_data` 不安全 ```c if (return_data.common.id == mod->id) ``` 建议将模块私有数据通过 `mod->priv` 获,避免使用全局变量,提高模块封装性和可维护性。 --- ### ⚠️ 多模块判断方式不灵活 ```c if (mod->id != ITEM_EADC && ...) ``` 建议为模块结构体增加一个标志位,例如: ```c struct ftm_module { int id; int visible; int test_result; int need_colon; // 是否需要加冒号 void *priv; }; ``` 这样判断可以简化为: ```c if (mod->need_colon) { strcat(test_result, ": "); } ``` --- ## ✅ 函数使用场景示例 该函数通常作为 AT 命令的回调函数,例如: ```c {24, ITEM_WIFI_CLOSE, "AT^CLOSE_WIFI", (hdlr)oplus_ftm_item_entry_cb} ``` 当用户通过串口输入: ``` AT^CLOSE_WIFI ``` 系统会调用此函数,执行 Wi-Fi 关闭测试,并返回: ``` OK ``` --- ## 🔗 相关函数说明 | 函数名 | 作用 | |--------|------| | `ftm_get_module(item_id)` | 根据模块 ID FTM 模块 | | `get_item_list()` | 获全局测试项列表 | | `get_item_name(items, item_id)` | 获测试项名称 | | `ftm_entry(item_id, &param)` | 调用模块的入口函数执行测试逻辑 | --- ##
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值