CentOS安装vnc

CENTOS6 安装VNC CENTOS6 安装VNCCENTOS6 安装VNC 安装vnc服务端及依赖项 新增用户及设置VNC相关参数配置windows客户端VNC安装vnc服务端及依赖项[root@localhost ~]# yum groupinstall Desktop[root@localhost ~]# yum install gnome-core xfce4 [root@localhost ~]# yum ins 阅读详情
1:通过
rpm -q vnc vnc-server
检测是否安装了vnc-server,如果没有安装,可通过
yum install vnc vnc-server
安装vnc的服务器端

2:把远程桌面的用户加入到配置文件中
vi /etc/sysconfig/vncservers
使用vi编辑器打开配置文件,在文件中添加下面两行命令
VNCSERVERS="1:root"           --指定远程用户
VNCSERVERARGS[1]="-geometry 1024x768"      --指定远程桌面分辨率

3:给你刚刚设置的远程桌面用户 root 设置密码
vncpasswd

4:开启VNC端口
vi /etc/sysconfig/iptables
使用vi编辑器打开配置文件,在文件中添加下面一行命令
-A RH-Firewall-l-INPUT -p tcp -m tcp --dport 5900:5903 -j ACCEPT

5:重启防火墙
service iptables restart

6:修改远程桌面显示配置文件(不修改此文件你看到的远程桌面很简单,相当于命令行操作,为了远程操作如同本地操作一样,务必参考以下方式进行修改)
cd ~/.vnc/
vi xstartup
使用vi编辑器打开配置文件,并进行下列修改
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &               --将它注释,加#代表注释
#twm &  --将它注释
gnome-session &  --添加它
看了这段代码,大家应该明白是怎么回事了

7:启动vnc服务
/sbin/service vncserver start

8:远程连接

打开vnc客户端(Windows平台下可使用vnc-4.0-x86_win32.rar,地址是:http://blogimg.chinaunix.net/blog/upfile2/090617094115.rar),
server框中输入ip:1 (1代表上面配置的远程用户代号,配置文件中可以配置多个远程用户),这时你便可以轻松的通过友好的远程桌面来控制centOS了。

9:开机自动启动vnc
vi /etc/rc.d/rc.local
使用vi编辑器打开配置文件,并进行下列修改
/etc/init.d/vncserver start   --新增行
Centos 8安装VNC及多用户配置详细教程 本问介绍了Centos 8系统安装VNC和多用户配置的详细教程。 阅读详情

相关推荐

CentOS 7 安装 VNC

查看服务器装了VNC没 [root@localhost ~]# rpm -q tigervnc vncserver-server 没有安装的话会出现如下提示 package tigervnc is not installed package tigervnc-server is not installed 如果安装了会出现如下提示 package tigervnc is not...

AcomechongqingIT的博客 556

CentOS9安装TigerVNC

问题出现在在CentOS上安装TigerVNC时,启动TigerVNC时会出现如下的错误,这将导致不能够观察到相应的端口被监听。分析问题出现的原因是CentOS版本过高所致,于是去查阅TigerVNC的官方说明文档,并最终解决了这个问题。至此所有的步骤均已完成,具体参考了redhat 8.3 vnc配置。

weixin_42681172的博客 3553

centos 6的vnc客户端和服务端离线安装包

vnc客户端和服务端离线安装包

CentOS 中 VNCServer 安装使用

参考: 1).  http://wiki.centos.org/HowTos/VNC-Server 2). http://www2.starcat.ne.jp/~kanocl/shumi/vnc.htm   1. 安装 vnc-server 软件包    1)检查 vnc-server 是否已安装,使用以下的命令:         # rpm -q vnc-server

x_i_y_u_e的专栏 1061

基于睿抗智能小车省赛第一题兵人识别的学习5.25

先用pip uninstall numpy卸载,再在后面输入pip install numpy==1.23安装版本为1.23的numpy。首先安装Anaconda环境;pycharm方便使用,安装yolov5以及一大堆数据包;由于python中的numpy插件包版本过高,训练失败,所以要安装一个版本低的包。每次运行都要先运行虚拟环境,输入:conda activate。图中所有精度大概在0.768-0.99之间。这里指定安装numpy1.23.。训练完成会得到一个衡量精度的指标。等待99张图片训练完成。

Haili_的博客 1302

vivado运行时报错 license文件更新操作

vivado使用:SYNTHESIS->Run Synthesis 时报错 [Common 17-345] A valid license was not found for feature ‘Synthesis’ and/or device ‘xc7vx485t’. Please run the Vivado License Manager for assistance in determiningwhich features and devices are licensed for your sy

qq_44692266的博客 2万+

CentOS远程系统管理之VNC

写这篇有摘自他人的地方,如若侵犯请立即告知,第一时间下降!! 现在比较好用的用的广泛的是SSH和PUTTY,通过这些客户端来管理LINUX服务器的,下面主要介绍另一款VNC软件,主要由两个部分组成:VNC Server和VNC Viewer,用户将VNC Server安装在被管理的LINUX服务器上,然后才在主控端执行VNC Viewer来管理被控端,VNC最大的有点就是跨平台,下面介绍一个在C

kutekute的专栏 1914

别再用MounRiver了!在VSCode里用PlatformIO搞定CH32V208开发(附完整配置流程)

本文详细介绍了如何在VSCode中使用PlatformIO进行CH32V208开发,替代传统的MounRiver Studio。通过完整的配置流程和优化技巧,开发者可以构建高效、现代化的RISC-V开发环境,显著提升编译速度和开发效率。

weixin_28711397的博客 539

Linux CentOS快速安装VNC并开启服务

Linux CentOS快速安装VNC并开启服务

5560

交换机救命命令手册:华为 & 思科平台最全运维指令速查表

很多时候,真正拉你一把的不是“高深理论”,而是你手里有没有一份靠得住的命令速查表。这篇文章,希望能成为你“进可调试,退可排障”的一份救命卡片。

HuaweiLab_Peach的博客 1519

高效数据迁移:ICCAP到ADS的数据导入与导出实战指南

本文提供了从ICCAP到ADS进行高效、准确数据迁移的实战指南。针对射频与微波电路设计中的关键挑战,详细阐述了迁移前的战略规划、ICCAP数据的精细化导出(包括脚本化批处理)、ADS数据的多种导入方法(如Data Items、DML模型库及编程化API),并强调了数据完整性与准确性验证的重要性,确保模型参数和仿真结果在平台间可靠传递。

weixin_29291185的博客 136

Centos快速安装vnc(tigervnc-server)

Centos快速安装vnc(tigervnc-server) Linux服务器端 第一步确认linux系统是否安装VNC rpm -q tigervnc-server 安装 #yum install tigervnc-server 修改配置文件,直接使用root用户 #vi /etc/sysconfig/vncservers VNCSERVERS="1:root" V

TURING.DT 1403

AI工具如何提升产品经理工作效率

AI工具在现代产品管理中扮演着越来越重要的角色,从需求挖掘到原型设计再到交付物制作,AI技术正在重塑产品经理的工作流程。通过自然语言处理(NLP)和机器学习(ML)技术,AI工具能够自动化处理大量重复性任务,如用户访谈转录、竞品分析、原型生成等,显著提升工作效率。以ChatGPT和Notion AI为例,这些工具可以快速生成结构化分析框架和PRD初稿,将传统需要数小时甚至数天的工作压缩到几分钟内完成。在产品设计阶段,工具如Uizard和Galileo AI能够根据文本描述自动生成可交互原型,大幅缩短设计探索

weixin_29194817的博客 243

CentOS7.x安装VNC实录

不知不觉,centos已经到7.6了,在服务器操作系统中,centos是用的比较多的,占很大的比例。由于7.x版本和6.x版本有区别,最近安装了7.6的VNC,特记之。 VNC需要系统安装的有桌面,如果是生产环境服务器,安装时使用的最小化安装,那么进行下面操作按章GNOME 桌面。 # 列出的组列表里有GNOME Desktop。 yum grouplist #安装之 yum group...

义龙道隐的专栏 7万+

如何选择StandardScaler、MinMaxScaler和RobustScaler做标准化的对比解释和示例代码

选择合适的标准化方法取决于数据的特点和需求。如果数据分布接近正态分布且无异常值,可以使用。如果需要将数据映射到特定范围内并保持相对关系,可以使用。如果数据中存在异常值或离群点,可以使用进行鲁棒标准化。在分类、聚类算法中,需要使用距离来度量相似性的时候、或者使用PCA技术进行降维的时候,StandardScaler表现更好(避免不同量纲对方差、协方差计算的影响);在不涉及距离度量、协方差、数据不符合正态分布、异常值较少的时候,可使用MinMaxScaler。

qq_36001281的博客 4943

【计算机视觉 | MMDetection】关于mmdetection如何计算参数量、计算量和速度FPS

【计算机视觉 | MMDetection】关于mmdetection如何计算参数量、计算量和速度FPS

wzk4869的博客 3022

Centos 7安装VNC

Centos7下安装VNC

as3309的博客 4685

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain&#39;s apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath(&#39;DeepLearnToolbox&#39;));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand(&#39;state&#39;,0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W&#39;); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand(&#39;state&#39;,0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = &#39;sigm&#39;;%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, &#39;Too big error&#39;);```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand(&#39;state&#39;,0)sae = saesetup([784 100]);sae.ae{1}.activation_function = &#39;sigm&#39;;sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)&#39;)% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;;nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, &#39;Too big error&#39;);```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x&#39;,28,28,60000))/255;test_x = double(reshape(test_x&#39;,28,28,10000))/255;train_y = double(train_y&#39;);test_y = double(test_y&#39;);%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you&#39;ll get around 1.2% errorrand(&#39;state&#39;,0)cnn.layers = { struct(&#39;type&#39;, &#39;i&#39;) %input layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 6, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %sub sampling layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 12, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, &#39;Too big error&#39;);```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, &#39;Too big error&#39;);%% ex2 neural net with L2 weight decayrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex3 neural net with dropoutrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex4 neural net with sigmoid activation functionrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex5 plotting functionalityrand(&#39;state&#39;,0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = &#39;softmax&#39;; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand(&#39;state&#39;,0)nn = nnsetup([784 20 10]); nn.output = &#39;softmax&#39;; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

CentOS7.6安装VNC

前提在服务器上已经安装好桌面。 以下为在CentOS7.6服务器上安装VNC远程连接工具的步骤: 第一步:安装VNC服务软件,使用root用户执行以下命令: yum install tigervnc-server -y 等待安装完毕。安装后可以使用如下命令来验证是否安装成功: 第二步:创建用户,配置vnc密码。 创建用户后,su进用户,使用 vncpasswd 来设置连接密码,以后使用VNC Viewer 远程密码输入的就是这个。务必记住,不要出错。 ...

qq_45684208的博客 9661

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

文档:亲测可用解决vnc灰屏,黑屏,鼠标大黑叉情况

主要解决vnc-viewer灰屏,黑屏,鼠标大黑叉等现象,详细见文档。

CentOS7安装VNC

本文介绍在CentOS7.1下安装VNC,让Win7远程桌面Linux解决了不少问题,写个教学贴,给新手们看看,如果你们碰到同样的问题,就可以迅速解决,无需头疼甚至放弃了。 1、检查是否安装VNC rpm -q tigervnc tigervnc-server 2、安装X-Window yum check-update yum groupinstall “X Window System” yum install gnome-classic-session gnome-terminal nautilus-op

weixin_43621549的博客 4033

TMS_WebGMaps_1.9.8.0_Full_Source

TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder

vnc安装步骤,vnc在CentOS 7下的安装步骤

VNC是什么( Virtual Network Computing)VNC允许Linux系统可以类似实现像Windows中的远程桌面访问那样访问Linux桌面。本文配置是在CentOS 7 HP服务器环境下运行。 开始之前先准备好工具:IIS7服务器管理软件 IIS7服务器管理工具里面的VNC功能可以说是使用感非常棒的。它可以批量打开链接。 当然,既然它的VNC工具都这么实用,那它其他功能必定也不会太差。IIS7服务器批量管理工具好处:批量管理、同步操作、到期提醒、数据安全和定期执行。适用系统:Win

Treasure003的博客 345

Centos 7 安装VNC步骤

原文:http://wic.xingning.gov.cn/blog/29 首先试试服务器装了VNC没 [root@wic ~]# rpm -q tigervnc tigervnc-server 没安装的话会直接出现 package tigervnc is not installed package tigervnc-server is not installed

Season@HangZhou 专栏 1135

Centos7 开启图形化界面 Linux安装VNC

实现在windows下通过vnc实现连接到CentOS系统的图形化界面

李指导的博客 2512

CentOS7 下 VNC 安装配置详细操作指引

CentOS7 下 VNC 安装配置详细操作指引 目录 1. Vnc 概述 2 2. Vnc 安装部署 2 2.1 环境检查 2 2.2 图形化桌面安装 3 2.3 Vnc 软件安装 4 3. Vnc 配置 5 3.1 需要了解的关键文档 5 3.2 Vnc配置文件配置 5 3.3 建立VNC用户 7 4. Vncserver 服务运行 7 4.1 vncserver 启动 7 4.2 vncserver 自启动 9 4.3 ...

Adong.Lee的博客 3549

centos7 安装vnc服务

centos7 安装vnc服务

jeff-wall blog 2073

在centos5下安装配置VNC

在centos5下安装配置VNC          今天在公司安装了一下vnc,晚上没事,就记录一下吧,要不下次安装就又得google了^_^VNC简介         不能免俗,简单说介绍下VNC吧。        VNC,全称为Virtual Network Computing,是一个桌面共享系统。它的功能,类似于windows中的远程桌面功能。VNC使用了RFB(Remote

hbcui1984的专栏 3294

CentOS 7安装Xfce和VNC

CentOS 7安装Xfce和VNC

kyotrue的专栏 5215
上一篇: select转combobox的extjs代码
下一篇: CentOS6.2安装tomcat6
Matrix_Designer
博客等级 码龄16年 58粉丝 296原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值