在skyeye中运行ucos

1. 下载并安装skyeye

2. 下载并安装arm交叉编译工具：arm-elf-tools-20030314.sh

3. 下载并安装ucosforskyeye：

    下载地址为：http://gro.clinux.org/frs/download.php/1004/ucosii4skyeye-1.9.3.tar.gz  (优快云上也有：http://download.youkuaiyun.com/down/1314694/siyue20041715 )；

    tar zxvf ucosii4skyeye-1.9.3.tar.gz

    cd ucosii4skyeye

    gedit lib/skyeye_printf.c

    添加下面内容：

    int isdigit(int c)
    {
        if( c >= '0' && c <= '9')
            return 1;

        return 0;
    }

    然后make就完成了编译

4. 用skyeye运行ucos

    cd samples/ucos_test

    skyeye -e usoc_test.elf

备注：如果使用新版本的skyeye，则可能需要修改skyeye.conf文件：

#skyeye config file sample
arch:arm
cpu: arm7tdmi

mach: at91

mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000
mem_bank: map=M, type=R,  addr=0x01400000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000
mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000
uart:mod=term
#log: logon=0, logfile=./sk1.log, start=0, end=200000