sw1配置
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw1
[sw1]
Apr 14 2026 21:51:09-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw1]vlan batch 10 20
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1]vlan batch 10
Apr 14 2026 21:51:39-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.20
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1]vlan batch
Apr 14 2026 21:51:49-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095.10 20
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1]
Apr 14 2026 21:51:59-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw1]dis th
#
sysname sw1
#
vlan batch 10 20
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
return
[sw1]interface vlanif 10
[sw1-Vlanif10]ip address 192.168.1.1 24
[sw1-Vlanif10]
Apr 14 2026 21:52:39-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 8, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw1-Vlanif10]interface vlanif 20
[sw1-Vlanif20]ip address 192.168.2.1 24
[sw1-Vlanif20]
Apr 14 2026 21:53:09-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 9, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw1-Vlanif20]
[sw1-Vlanif20]vrrp vrid 2 virtual-ip 192.168.2.254 24
^
Error:Too many parameters found at '^' position.
[sw1-Vlanif20]vrrp vrid 2 virtual-ip 192.168.2.254
[sw1-Vlanif20]
Apr 14 2026 21:53:49-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 10, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-Vlanif20]
[sw1-Vlanif20]
[sw1-Vlanif20]int vlanif 10
[sw1-Vlanif10]vrrp vrid 1 virtual-ip 192.168.1.254
[sw1-Vlanif10]
Apr 14 2026 21:54:19-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 11, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-Vlanif10]vrrp vrid 1 priority 120
[sw1-Vlanif10]
Apr 14 2026 21:54:49-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 12, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-Vlanif10]
[sw1-Vlanif10]
[sw1-Vlanif10]int g 0/0/2
[sw1-GigabitEthernet0/0/2]port link-t
[sw1-GigabitEthernet0/0/2]port link-type t
[sw1-GigabitEthernet0/0/2]port link-type trunk
[sw1-GigabitEthernet0/0/2]port t
[sw1-GigabitEthernet0/0/2]port trunk
Apr 14 2026 21:55:19-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 13, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-GigabitEthernet0/0/2]port type
[sw1-GigabitEthernet0/0/2]port trunk a
[sw1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10 20
[sw1-GigabitEthernet0/0/2]
Apr 14 2026 21:55:45-08:00 sw1 %%01IFNET/4/IF_STATE(l)[0]:Interface Vlanif10 has
turned into UP state.
Apr 14 2026 21:55:45-08:00 sw1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface Vlanif10 has entered the UP state.
Apr 14 2026 21:55:45-08:00 sw1 %%01IFNET/4/IF_STATE(l)[2]:Interface Vlanif20 has
turned into UP state.
Apr 14 2026 21:55:45-08:00 sw1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface Vlanif20 has entered the UP state.
[sw1-GigabitEthernet0/0/2]int
Apr 14 2026 21:55:49-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 14, the
change loop count is 0, and the maximum number of records is 4095.vlanif
Apr 14 2026 21:55:53-08:00 sw1 %%01VRRP/4/STATEWARNINGEXTEND(l)[4]:Virtual Route
r state BACKUP changed to MASTER, because of protocol timer expired. (Interface=
Vlanif10, VrId=1, InetType=IPv4)
Apr 14 2026 21:55:53-08:00 sw1 %%01VRRP/4/STATEWARNINGEXTEND(l)[5]:Virtual Route
r state BACKUP changed to MASTER, because of protocol timer expired. (Interface=
Vlanif20, VrId=2, InetType=IPv4) 10
[sw1-Vlanif10]vrrp vrid 1 preempt-mode timer delay 20
[sw1-Vlanif10]
Apr 14 2026 21:56:09-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 15, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-Vlanif10]
[sw1-Vlanif10]
[sw1-Vlanif10]
[sw1-Vlanif10]q
[sw1]vlan batch 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1]
Apr 14 2026 21:56:29-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 16, the
change loop count is 0, and the maximum number of records is 4095.
[sw1]
[sw1]int vlanif 100
[sw1-Vlanif100]ip ad
[sw1-Vlanif100]ip address 12.0.0.2 24
[sw1-Vlanif100]
Apr 14 2026 21:58:09-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 17, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-Vlanif100]
[sw1-Vlanif100]
[sw1-Vlanif100]int g 0/0/1
[sw1-GigabitEthernet0/0/1]port link-type access
[sw1-GigabitEthernet0/0/1]
Apr 14 2026 21:58:39-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 18, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-GigabitEthernet0/0/1]
[sw1-GigabitEthernet0/0/1]
[sw1-GigabitEthernet0/0/1]port default vlan 100
[sw1-GigabitEthernet0/0/1]
Apr 14 2026 21:58:47-08:00 sw1 %%01IFNET/4/IF_STATE(l)[6]:Interface Vlanif100 ha
s turned into UP state.
Apr 14 2026 21:58:47-08:00 sw1 %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP
on the interface Vlanif100 has entered the UP state.
[sw1-GigabitEthernet0/0/1]
[sw1-GigabitEthernet0/0/1]
Apr 14 2026 21:58:49-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 19, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-GigabitEthernet0/0/1]
[sw1-GigabitEthernet0/0/1]
[sw1-GigabitEthernet0/0/1]q
[sw1]rip 1
[sw1-rip-1]version 2
[sw1-rip-1]
Apr 14 2026 21:59:19-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 21, the
change loop count is 0, and the maximum number of records is 4095.net
[sw1-rip-1]network
[sw1-rip-1]network 12.0.0.0
[sw1-rip-1]
Apr 14 2026 21:59:29-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 22, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-rip-1]net
[sw1-rip-1]network 192.168.1.0
[sw1-rip-1]net
[sw1-rip-1]network
Apr 14 2026 21:59:49-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 23, the
change loop count is 0, and the maximum number of records is 4095.192.168.2.0
[sw1-rip-1]
Apr 14 2026 21:59:59-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 24, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-rip-1]
[sw1-rip-1]dis th
#
rip 1
version 2
network 12.0.0.0
network 192.168.1.0
network 192.168.2.0
#
return
[sw1-rip-1]
sw2配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw2
[sw2]
Apr 14 2026 22:01:59-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw2]vlan ba
[sw2]vlan batch 10 20
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2]
Apr 14 2026 22:02:09-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw2]
[sw2]
[sw2]int g 0/0/2
[sw2-GigabitEthernet0/0/2]port l
[sw2-GigabitEthernet0/0/2]port link-t
[sw2-GigabitEthernet0/0/2]port link-type t
[sw2-GigabitEthernet0/0/2]port link-type trunk
[sw2-GigabitEthernet0/0/2]
Apr 14 2026 22:02:39-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw2-GigabitEthernet0/0/2]
[sw2-GigabitEthernet0/0/2]port trunk allow-pass vlan 10 20
[sw2-GigabitEthernet0/0/2]
[sw2-GigabitEthernet0/0/2]
[sw2-GigabitEthernet0/0/2]
[sw2-GigabitEthernet0/0/2]int
Apr 14 2026 22:02:59-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095.
^
Error: Unrecognized command found at '^' position.
[sw2-GigabitEthernet0/0/2]int v
[sw2-GigabitEthernet0/0/2]int vl
[sw2-GigabitEthernet0/0/2]int v 10
[sw2-Vlanif10]
Apr 14 2026 22:03:28-08:00 sw2 %%01IFNET/4/IF_STATE(l)[0]:Interface Vlanif10 has
turned into UP state.
[sw2-Vlanif10]
[sw2-Vlanif10]ip a
[sw2-Vlanif10]ip address
[sw2-Vlanif10]ip address 192.168.1.2 24
[sw2-Vlanif10]
Apr 14 2026 22:04:04-08:00 sw2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface Vlanif10 has entered the UP state.
[sw2-Vlanif10]
Apr 14 2026 22:04:09-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 8, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw2-Vlanif10]int v 20
[sw2-Vlanif20]
Apr 14 2026 22:04:19-08:00 sw2 %%01IFNET/4/IF_STATE(l)[2]:Interface Vlanif20 has
turned into UP state.
[sw2-Vlanif20]ip ad
[sw2-Vlanif20]ip address 192.168.2.2 24
[sw2-Vlanif20]
Apr 14 2026 22:04:36-08:00 sw2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface Vlanif20 has entered the UP state.
[sw2-Vlanif20]
Apr 14 2026 22:04:39-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 9, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw2-Vlanif20]vrrp vrid 2 virtual-ip 192.168.2.254
[sw2-Vlanif20]
Apr 14 2026 22:04:59-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 10, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-Vlanif20]vrrp vrid 2 priority 120
[sw2-Vlanif20]
Apr 14 2026 22:05:13-08:00 sw2 %%01VRRP/4/STATEWARNINGEXTEND(l)[4]:Virtual Route
r state BACKUP changed to MASTER, because of priority calculation. (Interface=Vl
anif20, VrId=2, InetType=IPv4)
[sw2-Vlanif20]
[sw2-Vlanif20]
[sw2-Vlanif20]
[sw2-Vlanif20]
Apr 14 2026 22:05:19-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 11, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-Vlanif20]
[sw2-Vlanif20]vrrp vrid 2 preempt-mode timer delay 20
[sw2-Vlanif20]
Apr 14 2026 22:05:29-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 12, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-Vlanif20]
[sw2-Vlanif20]int v 10
[sw2-Vlanif10]vrrp vrid 1 virtual-ip 192.168.1.254
[sw2-Vlanif10]
[sw2-Vlanif10]
[sw2-Vlanif10]
Apr 14 2026 22:05:59-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 13, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-Vlanif10]
[sw2-Vlanif10]q
[sw2]int v 200
Error: The VLAN does not exist.
[sw2]int b 200
^
Error: Wrong parameter found at '^' position.
[sw2]int b
[sw2]vlan batch 200
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2]
Apr 14 2026 22:07:09-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 14, the
change loop count is 0, and the maximum number of records is 4095.
[sw2]
[sw2]
[sw2]int v 200
[sw2-Vlanif200]ip a
[sw2-Vlanif200]ip address 13.0.0.2 24
[sw2-Vlanif200]
[sw2-Vlanif200]i
Apr 14 2026 22:07:49-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 15, the
change loop count is 0, and the maximum number of records is 4095
[sw2-Vlanif200]
[sw2-Vlanif200]int g 0/0/1
[sw2-GigabitEthernet0/0/1]port link-type access
[sw2-GigabitEthernet0/0/1]
Apr 14 2026 22:08:09-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 16, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-GigabitEthernet0/0/1]
[sw2-GigabitEthernet0/0/1]port default vlan 200
[sw2-GigabitEthernet0/0/1]
Apr 14 2026 22:08:18-08:00 sw2 %%01IFNET/4/IF_STATE(l)[5]:Interface Vlanif200 ha
s turned into UP state.
Apr 14 2026 22:08:18-08:00 sw2 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP
on the interface Vlanif200 has entered the UP state.
[sw2-GigabitEthernet0/0/1]
[sw2-GigabitEthernet0/0/1]
[sw2-GigabitEthernet0/0/1]
Apr 14 2026 22:08:19-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 17, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-GigabitEthernet0/0/1]
[sw2-GigabitEthernet0/0/1]rip 1
[sw2-rip-1]
Apr 14 2026 22:08:39-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 18, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-rip-1]
[sw2-rip-1]
[sw2-rip-1]
[sw2-rip-1]version 2
[sw2-rip-1]
Apr 14 2026 22:08:49-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 19, the
change loop count is 0, and the maximum number of records is 4095.net
[sw2-rip-1]network
[sw2-rip-1]network 13.0.0.0
[sw2-rip-1]n
[sw2-rip-1]network 19
Apr 14 2026 22:08:59-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 20, the
change loop count is 0, and the maximum number of records is 4095.2.168.1.0
[sw2-rip-1]
[sw2-rip-1]
[sw2-rip-1]n
[sw2-rip-1]network 19.
Apr 14 2026 22:09:09-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 21, the
change loop count is 0, and the maximum number of records is 40952.168.2.0
[sw2-rip-1]
[sw2-rip-1]dis th
#
rip 1
version 2
network 13.0.0.0
network 192.168.1.0
network 192.168.2.0
#
return
[sw2-rip-1]
Apr 14 2026 22:09:19-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 22, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-rip-1]
sw3配置
The device is running!
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw3
[sw3]
Apr 14 2026 21:40:19-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw3]vlan batch 10 20
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw3]
Apr 14 2026 21:40:39-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw3]int g 0/0/3
[sw3-GigabitEthernet0/0/3]port l
[sw3-GigabitEthernet0/0/3]port link-t
[sw3-GigabitEthernet0/0/3]port link-type a
[sw3-GigabitEthernet0/0/3]port link-type access
[sw3-GigabitEthernet0/0/3]
Apr 14 2026 21:41:09-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw3-GigabitEthernet0/0/3]port de
[sw3-GigabitEthernet0/0/3]port default 10
^
Error: Unrecognized command found at '^' position.
[sw3-GigabitEthernet0/0/3]port de
[sw3-GigabitEthernet0/0/3]port default vlan 10
[sw3-GigabitEthernet0/0/3]int g
Apr 14 2026 21:41:39-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095.0/0/4
[sw3-GigabitEthernet0/0/4]port ;in
[sw3-GigabitEthernet0/0/4]port l
[sw3-GigabitEthernet0/0/4]port link-t
[sw3-GigabitEthernet0/0/4]port link-type a
[sw3-GigabitEthernet0/0/4]port link-type access
[sw3-GigabitEthernet0/0/4]
Apr 14 2026 21:41:59-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 8, the c
hange loop count is 0, and the maximum number of records is 4095.port de
[sw3-GigabitEthernet0/0/4]port default vlan 20
[sw3-GigabitEthernet0/0/4]
Apr 14 2026 21:42:09-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 9, the c
hange loop count is 0, and the maximum number of records is 4095.q
[sw3]int g 0/01
^
Error: Wrong parameter found at '^' position.
[sw3]int g 0/0/1
[sw3-GigabitEthernet0/0/1]port l
[sw3-GigabitEthernet0/0/1]port link-t
[sw3-GigabitEthernet0/0/1]port link-type t
[sw3-GigabitEthernet0/0/1]port link-type trunk
[sw3-GigabitEthernet0/0/1]port
Apr 14 2026 21:43:09-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 10, the
change loop count is 0, and the maximum number of records is 4095.tr
[sw3-GigabitEthernet0/0/1]port trunk al
[sw3-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20
[sw3-GigabitEthernet0/0/1]
[sw3-GigabitEthernet0/0/1]
[sw3-GigabitEthernet0/0/1]
[sw3-GigabitEthernet0/0/1]
[sw3-GigabitEthernet0/0/1]
Apr 14 2026 21:43:29-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 11, the
change loop count is 0, and the maximum number of records is 4095.
[sw3-GigabitEthernet0/0/1]int g 0/0/2
[sw3-GigabitEthernet0/0/2]port l
[sw3-GigabitEthernet0/0/2]port link-t
[sw3-GigabitEthernet0/0/2]port link-type t
[sw3-GigabitEthernet0/0/2]port link-type trunk
[sw3-GigabitEthernet0/0/2]por
Apr 14 2026 21:43:49-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 12, the
change loop count is 0, and the maximum number of records is 4095.t
[sw3-GigabitEthernet0/0/2]portswitch
[sw3-GigabitEthernet0/0/2]port-auto-sleep
[sw3-GigabitEthernet0/0/2]port-security
[sw3-GigabitEthernet0/0/2]portal
[sw3-GigabitEthernet0/0/2]port-isolate
[sw3-GigabitEthernet0/0/2]port-mirroring
[sw3-GigabitEthernet0/0/2]port
[sw3-GigabitEthernet0/0/2]port t
[sw3-GigabitEthernet0/0/2]port trunk a
[sw3-GigabitEthernet0/0/2]port trunk allow-pass vlan 10 20
[sw3-GigabitEthernet0/0/2]
Apr 14 2026 21:44:19-08:00 sw3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 13, the
change loop count is 0, and the maximum number of records is 4095.
[sw3-GigabitEthernet0/0/2]
ar1配置
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys ar1
[ar1]int l
[ar1]int LoopBack 0
[ar1-LoopBack0]ip a
[ar1-LoopBack0]ip address 1.1.1.1 24
[ar1-LoopBack0]int g 0/0/0
[ar1-GigabitEthernet0/0/0]ip a
[ar1-GigabitEthernet0/0/0]ip accounting
[ar1-GigabitEthernet0/0/0]ip address12.0.0.1 24
^
Error: Unrecognized command found at '^' position.
[ar1-GigabitEthernet0/0/0]ip a
[ar1-GigabitEthernet0/0/0]ip accounting
[ar1-GigabitEthernet0/0/0]ip address 12.0.0.1 24
Apr 14 2026 22:11:11-08:00 ar1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[ar1-GigabitEthernet0/0/0]int g 0/0/1
[ar1-GigabitEthernet0/0/1]ip a
[ar1-GigabitEthernet0/0/1]ip accounting
[ar1-GigabitEthernet0/0/1]ip address 13.0.0.1 24
Apr 14 2026 22:11:35-08:00 ar1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[ar1-GigabitEthernet0/0/1]
[ar1-GigabitEthernet0/0/1]q
[ar1]rip 1
[ar1-rip-1]ver
[ar1-rip-1]verify-source
[ar1-rip-1]version 2
[ar1-rip-1]n
[ar1-rip-1]network 1.0.0.0
[ar1-rip-1]net
[ar1-rip-1]network 12.0.0.0
[ar1-rip-1]n
[ar1-rip-1]network 13.0.0.0
[ar1-rip-1]dis th
[V200R003C00]
#
rip 1
version 2
network 1.0.0.0
network 12.0.0.0
network 13.0.0.0
#
return
[ar1-rip-1]
验证
2551
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
