关于Please make sure you have the correct access rights and the repository exists.问题的解决方式

本文详细介绍了如何解决使用Git时遇到的远程仓库权限验证失败的问题,包括SSH密钥生成、配置邮箱、添加公钥到GitHub账户等步骤,并最终实现与远程仓库的成功连接。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

输入:git push -u origin master命令出现以下类似内容

Theauthenticity of host 'github.com (13.250.167.23)' can't be established.

RSAkey fingerprint is SHA256:nThbg6kXUpJWGl7E1IGOCspRomTxdCARLviKw6E5SY8.

Areyou sure you want to continue connecting (yes/no)? no

Hostkey verification failed.

fatal:Could not read from remote repository.

 

Pleasemake sure you have the correct access rights

andthe repository exists.

解决:

git config –globaluser.email“your@email.com”回车获取your@email.com

 

$ ssh-keygen -t rsa -C "your@email.com"

会出现

Generatingpublic/private rsa key pair.

Enterfile in which to save the key (/c/Users/mashuai/.ssh/id_rsa):

无视这些请继续直接按下回车

Enterpassphrase (empty for no passphrase):

Entersame passphrase again:

Youridentification has been saved in /c/Users/mashuai/.ssh/id_rsa.

Your public key has been saved in /c/Users/mashuai/.ssh/id_rsa.pub.

Thekey fingerprint is:

SHA256:PwMOjau2FfUgxY9u5r1UQ/WpzNkgxxtPazsaFdztukM“1072815616@qq.com

Thekey's randomart image is:

+---[RSA2048]----+

|       ..    .  |

|       ..  ....+|

|      . oo ..= =+|

|       =.o..= X.o|

|      +.S . o* *.|

|       =+o . .E..|

|      o+..= o.o |

|    .o ...o  +..|

|   .o.   .. ... |

+----[SHA256]-----+

之后打开提示的目录下(红色提示)用记事本打开id_rsa.pub,进入到自己的账号https://github.com/....../settings/keys/new,复制记事本内容到Key,无视Title即可

之后执行命令: git push-u origin master

 

仍出现如下:

ERROR:The key you are authenticating with has been marked as read only.

fatal:Could not read from remote repository.

 

Pleasemake sure you have the correct access rights

andthe repository exists.

解决:输入命令git pull--rebase origin master从远程分支进行拉取

会出现以下类似内容说明拉取成功

Warning:Permanently added the RSA host key for IP address '13.229.188.59' to th                                                                                                               elist of known hosts.

warning:no common commits

remote:Counting objects: 3, done.

remote:Total 3 (delta 0), reused 0 (delta 0), pack-reused 0

Unpackingobjects: 100% (3/3), done.

Fromgithub.com:maerqi/hello-world

 * branch            master     -> FETCH_HEAD

 * [new branch]      master    -> origin/master

First,rewinding head to replay your work on top of it...

最后在执行命令: git push-u origin master,出现类似以下内容

Countingobjects: 16, done.

Deltacompression using up to 4 threads.

Compressingobjects: 100% (15/15), done.

Writingobjects: 100% (16/16), 1.43 KiB | 489.00 KiB/s, done.

Total16 (delta 4), reused 0 (delta 0)

remote:Resolving deltas: 100% (4/4), done.

Togithub.com:maerqi/hello-world.git

   da99626..ae02fd0  master -> master

Branch'master' set up to track remote branch 'master' from 'origin'.

说明已成功和远程仓库完美连接,该做什么事了你心里还不清楚吗

 

参考

 https://blog.youkuaiyun.com/qq_34291777/article/details/55052201?locationNum=1&fps=1

https://jingyan.baidu.com/article/f3e34a12a25bc8f5ea65354a.html

### 解决 Jenkins 错误 'Please make sure you have the correct access rights and the repository exists' 当遇到此错误时,通常是因为 Jenkins 在尝试克隆 Git 仓库时遇到了权限问题或指定的仓库地址无效。以下是可能的原因以及解决方案: #### 1. 验证仓库 URL 的有效性 确认所提供的仓库 URL 是否正确。可以通过手动运行 `git clone` 命令来验证仓库是否存在并可被访问。 ```bash git clone https://your-repository-url.git ``` 如果命令失败,则可能是仓库路径有误或是私有仓库未提供认证信息[^3]。 #### 2. 检查 SSH 密钥配置 (针对私有仓库) 对于私有仓库,确保已正确设置 SSH 密钥,并将其添加到远程服务器上对应的账户中。可以按照以下步骤操作: - 确认本地机器上的公钥文件 (`~/.ssh/id_rsa.pub`) 已经上传至目标代码托管平台(如 GitHub 或 Bitbucket)。 - 测试连接是否正常工作: ```bash ssh -T git@github.com ``` 上述命令应返回一条消息表明身份已被接受;如果没有通过,请重新生成密钥对并将新的公钥提交给服务提供商[^4]。 #### 3. 设置正确的凭据 在 Jenkins 中定义构建作业时,需确保选择了合适的凭据用于访问版本控制系统中的资源。进入项目的 **Source Code Management** 部分,选择适当的凭证类型——用户名/密码组合或者是之前提到过的SSH key[^5]。 #### 4. 使用 HTTPS 而不是 SSH (作为替代方案) 有时切换协议可以帮助绕过某些网络环境下的限制。将原来的 ssh 地址改为 http(s),比如从: ```text git@github.com:user/repo.git ``` 更改为 ```text https://github.com/user/repo.git ``` 注意此时需要输入有效的用户名和令牌代替传统的密码登录方式[^6]。 #### 5. 权限管理调整 最后一步涉及检查是否有足够的权限执行所需的操作。这不仅包括读取存储库的能力,还包括写入更改的权利(如果有部署需求)。联系管理员授予必要的角色或许能解决问题[^7]。 --- ### 提供一段 Python 示例脚本检测基本连通性和权限状态 下面是一个简单的Python程序用来测试能否顺利拉取Git项目数据包而无需实际完成整个clone过程: ```python import subprocess def test_git_access(repo_url): try: result = subprocess.run(['git', 'ls-remote', repo_url], stdout=subprocess.PIPE, stderr=subprocess.PIPE) if result.returncode != 0: raise Exception(f"Error accessing {repo_url}: {result.stderr.decode('utf-8')}") print("Access successful.") except Exception as e: print(e) test_git_access("https://your-repository-url.git") ``` 以上函数利用了 `git ls-remote` 命令快速判断远端仓库的状态而不必下载全部内容。 ---
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值