The Python Tutorial之Class(三)

RSM 219 | CLASS 1 – TUTORIAL: Introduction to Financial ReportingR products.Ourmission istorgy.doany cashdividendsinthe16,39816,25317,57619,38444,55532,76434,89532,18029,80627,261329(5,399)8328331,4481,86896,77381,46253,82331,53640,21724,90613,6066,6302,6638,2978,087。 阅读详情

1. Inheritance

  • The name BaseClassName must be defined in a scope containing the derived class definition. In place of a base class name, other arbitrary expressions are also allowed. This can be useful, for example, when the base class is defined in another module:class DerivedClassName(modname.BaseClassName):
  • Execution of a derived class definition proceeds the same as for a base class. When the class object is constructed, the base class is remembered. This is used for resolving attribute references: if a requested attribute is not found in the class, the search proceeds to look in the base class. This rule is applied recursively if the base class itself is derived from some other class.这种对属性的引用会顺着继承关系往下在基类寻找
  • There’s nothing special about instantiation of derived classes: DerivedClassName() creates a new instance of the class. Method references are resolved as follows: the corresponding class attribute is searched, descending down the chain of base classes if necessary, and the method reference is valid if this yields a function object.第二点是指class object说的,第三点是指instance of class说的
  • Derived classes may override methods of their base classes. Because methods have no special privileges when calling other methods of the same object, a method of a base class that calls another method defined in the same base class may end up calling a method of a derived class that overrides it.继承的子类很有可能覆盖基类的method,这点需要注意
  • An overriding method in a derived class may in fact want to extend rather than simply replace the base class method of the same name. There is a simple way to call the base class method directly: just call BaseClassName.methodname(self, arguments). This is occasionally useful to clients as well. (Note that this only works if the base class is accessible as BaseClassName in the global scope.)
  • Python has two built-in functions that work with inheritance:
  • Use isinstance() to check an instance’s type: isinstance(obj, int) will be True only if obj._class_ is int or some class derived from int.
  • Use issubclass() to check class inheritance: issubclass(bool, int) is True since bool is a subclass of int. However, issubclass(float, int) is False since float is not a subclass of int.

下面的例子可以完全说明上面的问题:

class base_a ():
    def put_b(self):
        print("A")
    def put_a(self):
        self.put_b()


class a(base_a):
    def put_b(self):
        print("B")
        base_a.put_b(self)



if __name__=='__main__':
    b=base_a()
    b.put_a()
    #---
    b=a()
    #基类的method被覆盖
    b.put_a()
    #判断是否是实例或者基类
    print(isinstance(b,base_a))
    print(issubclass(a,base_a))

结果为:

>>>
= RESTART: C:/Users/dhuang/AppData/Local/Programs/Python/Python36-32/test.py =
A
B
A
True
True
>>>

2. Multiple Inheritance

class DerivedClassName(Base1, Base2, Base3):
    <statement-1>
    .
    .
    .
    <statement-N>
  • Thus, if an attribute is not found in DerivedClassName, it is searched for in Base1, then (recursively) in the base classes of Base1, and if it was not found there, it was searched for in Base2, and so on.
  • In fact, it is slightly more complex than that; the method resolution order changes dynamically to support cooperative calls to super().关于动态解析的知识了解一下就行

针对第一点理解以下,做以下尝试:

class base_a():
    def put_b(self):
        print("A")
    def put_a(self):
        self.put_b()


class a(base_a):
    def put_e(self):
        print("B")
        base_a.put_b(self)


class b(a):
    def put_c(self):
        print("C")

if __name__=='__main__':
    c=b()
    c.put_b()

结果:

>>>
A
#c.put_b()沿着继承关系找到基类base_a中的put_b方法
>>>

3. Private Variables

  • it still is possible to access or modify a variable that is considered private. This can even be useful in special circumstances, such as in the debugger.
  • Name mangling is helpful for letting subclasses override methods without breaking intraclass method calls.

针对以上两点进行实验,如下:

class base_a ():
    def __init__(self):
        self.__private=1
        self.public=2
    def put_pub(self):
        print(slef.public)
    def put_pri(self):
        print(self.__private)

if __name__=='__main__':
    #first test
    c=base_a()
    c.put_pri()
    print(c.__private)

看运行结果:

1  #无法访问实例私有变量
Traceback (most recent call last):
  File "C:\Users\dhuang\AppData\Local\Programs\Python\Python36-32\test.py", line 14, in <module>
    print(c.__private)
AttributeError: 'base_a' object has no attribute '__private'
>>>

进一步修改代码深入:

if __name__=='__main__':
    #first test
    c=base_a()
    c.put_pri()
#   print(c.__private)
    print(c._base_a__private)
#second test
    c._basea_private=2
    print(c._base_a__private)

结果:

>>>
= RESTART: C:\Users\dhuang\AppData\Local\Programs\Python\Python36-32\test.py =
1
1
1 #通过加上类名可以访问实例私有变量,但是无法改变其值
>>>

以上小代码为理解上述第一点内容,但是实际中的作用,还得以后的学习体会。然后对第二点内容进行理解:

class base_a ():
    def put_b(self):
        print("A")
    def put_a(self):
        self.__private_b()
    __private_b=put_b

class a(base_a):
    def put_b(self):
        print("B")
        base_a.put_b(self)



if __name__=='__main__':
    b=a()
    b.put_a()

结果如下:

>>>
= RESTART: C:\Users\dhuang\AppData\Local\Programs\Python\Python36-32\test.py =
A #通过类私有变量保存了基类的方法,避免被子类的方法覆盖
>>>

4. Iterators

官方的手册指出来下面几点:

  • for采用的实现是通过调用iter()返回一个iterator object,然后调用object.__next__去迭代,当超过index的范围就会rasie一个异常来终止for.
  • 我们自己可以的类可以仿照这样的例子来支持迭代特性。
  • 该自定义类要含有__iter()__,__next__()方法
class owniter:
    def __init__(self,a):
        self.data=a
        self.datalen=len(a)
        self.index=0
    def __iter__(self):
        return self
    def __next__(self):
        if self.index == self.datalen :
            raise StopIteration
        self.index =self.index+1
        return self.data[self.index-1]

if __name__=='__main__':
    for i in owniter('qwm'):
        print i

结果:

>>>
= RESTART: C:\Users\dhuang\AppData\Local\Programs\Python\Python36-32\test.py =
q
w
m
>>>

7. Generators

  • Generators are a simple and powerful tool for creating iterators. They are written like regular functions but use the yield statement whenever they want to return data. Each time next() is called on it, the generator resumes where it left off (it remembers all the data values and which statement was last executed).
  • What makes generators so compact is that the _iter_() and next() methods are created automatically.
  • In addition to automatic method creation and saving program state, when generators terminate, they automatically raise StopIteration.

笔者认为只需要重点记住yeild用在我们想返回数据的地方,然后记住一个例子就可以了:

def  owniter(data):
    for i in range(0,len(data),1)
        yield data[i]


for i in owniter('qwm'):
    print(i)

结果:

q
w
m

8. Generator Expressions

These expressions are designed for situations where the generator is used right away by an enclosing function. Generator expressions are more compact but less versatile than full generator definitions and tend to be more memory friendly than equivalent list comprehensions.Generator Expressions更加节省空间

直接看看官网给的例子,然后照葫芦画瓢的使用:

>>> sum(i*i for i in range(10))                 # sum of squares
285

>>> xvec = [10, 20, 30]
>>> yvec = [7, 5, 3]
>>> sum(x*y for x,y in zip(xvec, yvec))         # dot product
260

>>> from math import pi, sin
>>> sine_table = {x: sin(x*pi/180) for x in range(0, 91)}

>>> unique_words = set(word  for line in page  for word in line.split())

>>> valedictorian = max((student.gpa, student.name) for student in graduates)

>>> data = 'golf'
>>> list(data[i] for i in range(len(data)-1, -1, -1))
['f', 'l', 'o', 'g']

9. 总结

以上内容,还是需要在敲代码中逐渐掌握,官网的手册并没有很详细论述,有些地方依然是比较模糊。

Grok CLI教程:命令行AI工具与/tutorial交互式学习指南 命令行界面(CLI)作为开发者与系统交互的核心工具,通过文本指令实现高效操作和自动化。其工作原理基于命令解析、进程调用和结果返回,在DevOps和持续集成中具有重要技术价值。随着AI技术的发展,CLI工具开始集成大语言模型能力,为开发者提供智能代码审查、自动化脚本生成等应用场景。xAI推出的Grok CLI正是这一趋势的典型代表,特别是其创新的/tutorial命令,通过交互式学习模式降低AI工具使用门槛。该功能采用渐进式教学,结合API集成实战,帮助开发者快速掌握AI能力集成技能,显著提升开发效率和学习效 阅读详情

相关推荐

IDEA 2023.2最新破解安装教程(含详细配置步骤及常见问题解决)

本文详细介绍了IDEA 2023.2的安装流程及高效开发环境搭建指南,涵盖基础配置、项目结构优化、核心功能使用、插件推荐、性能优化等全方位内容,帮助开发者快速掌握这一强大的Java开发工具。

x2y3z4a5b的博客 1756

Python中的 type() 和 __class__

最近在公司内部的问答系统上有同事问了一个问题:Python中的type()和__class__有什么差别? >>> class Foo(object): pass >>> class Bar(object): pass >>> class Brion(object): pass >>> class ASML(object): __class__ = Foo >>

huanhu821011的专栏 4580

tuts4you-lena151-Crackme-tutorial06

一、前言      本次研究的是lena151-Crackme-tutorial06,也是一个应用程序,但因为平台迭代的关系,程序不能正常运行,只能完成部分破解。 (一)·本次我们要破解的目标是个应用程序,如下图 (二)、使用工具:x32dbg 二、过程 这个程序的破解的方法很多,首先最简单的一种不外乎就是搜索字符串,我就按照这个思路来完成。 (一)查找字符串&lt;Unregis...

h123120的专栏 521

cAdvisor REST API Go 客户端实战指南:使用 client 包对接 v1.3/v2.1 监控接口

cAdvisor 仓库的 `client` 目录提供了一套用 Go 语言实现的 cAdvisor REST API 客户端,开发者无需手工拼装 HTTP 请求、解析 JSON,即可通过几个简单的 Go 方法获取宿主机与容器的资源监控数据。本文以 [client/README.md](https://link.gitcode.com/i/edb87a9e52f59f375e3cb3a35e8bfa7

gitblog_00153的博客 885

保姆级教程:用vxe-grid给管理后台加个「智能筛选」功能(支持模糊搜索/多选/范围查询)

本文提供了一份详细的Vxe-Grid智能筛选功能实现教程。通过自定义筛选器渲染,文章逐步指导开发者为后台管理系统添加支持模糊搜索、多选下拉和数值范围查询的智能筛选功能,并分享了性能优化与移动端适配等实战经验。

weixin_29021291的博客 537

VerilogEval实战指南:从基准测试到模型微调的全流程解析

本文提供了VerilogEval实战指南,详细解析了从基准测试到模型微调的全流程。VerilogEval是一个自动化、标准化的测试框架,用于客观评估大语言模型生成Verilog硬件代码的能力。文章涵盖了环境搭建、核心机制解析、利用其生成合成数据进行模型微调的策略,以及如何将其工程化集成到自动化评估流程中,为硬件设计领域的AI应用提供了完整的方法论。

yy01234的博客 1005

The Python Tutorial之Class(二)

1. Class Objects When a class definition is entered, a new namespace is created, and used as the local scope — thus, all assignments to local variables go into this new namespace. In particular, f...

LoveStackover的博客 357

jeecg-boot getDictItemsByTable接口存在SQL注入漏洞CVE-2024-48307

微信公众号搜索:南风漏洞复现文库该文章 南风漏洞复现文库 公众号首发JeecgBoot 是一款开源的的低代码开发平台。

nnn2188185的博客 334

The Python Tutorial之Class(一)

1. A Word About Names and Objects Objects have individuality, and multiple names (in multiple scopes) can be bound to the same object. This is known as aliasing in other languages. For exam...

LoveStackover的博客 375

Centos 7 Linux 离线安装单机 Kafka:下载、安装、配置、使用

本文详细介绍了在 CentOS 7 系统上离线安装单机版 Apache Kafka 的完整流程,包括环境准备(JDK 安装)、Kafka 安装包上传与解压、关键配置修改(如监听地址)、ZooKeeper 与 Kafka 服务的启动,以及 Topic 的创建、消息的生产和消费等基础操作。适用于无网络环境下的 Kafka 快速部署与学习,为后续开发或测试提供本地消息队列支持。

寒水馨 · 轻量级技术文档 · hanshuixin.org 1320

如何快速入门Python爬虫:Easy-scraping-tutorial基础教程

想要快速掌握Python爬虫技术?Easy-scraping-tutorial项目为你提供了一套完整而简单的Python网络爬虫教程代码。这个开源项目通过实际案例和循序渐进的教学方式,帮助初学者轻松入门网页数据抓取技术。无论你是数据分析师、研究人员还是开发者,学习Python爬虫都能让你从海量网页中高效提取有价值的信息。🚀 ## 📚 什么是Python爬虫? Python爬虫是一种自动化程

gitblog_00709的博客 1064

在Keil uv5里面添加STC元器件库,不影响其他元件

先到网上下载stc.CBD(宏晶网站的地址实效了)还有STC新系列单片机的头文件,宏晶的网站就有1、在Keil/C51/INC下新建目录"STC"文件夹, 把所有STC新系列单片机的头文件拷贝到"STC"目录下。2、下载的用于keil下的STC器件数据库更名为STC.CDB并拷贝到Keil/UV4目录下。3、打开Keil文件夹下的TOOLS.ini文件。4、在[UV2]下键入CDB0="UV2\S

技术联盟 1万+

Python tutorial笔记 class

Python classes provide all the standard features of Object Oriented Programming: the class inheritance mechanism allows multiple base classes a derived class can override any methods of its base

阿张的代码诗社 486

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

React 服务端跨请求 LRU 缓存实战:解析 preguntas-entrevista-react 中的 Vercel 缓存规则

本篇文章以 preguntas-entrevista-react 仓库内 `.agents/skills/vercel-react-best-practices` 技能包中的 `server-cache-lru` 规则为骨架,系统讲解 React/Next.js 服务端场景下跨请求 LRU 缓存的实现方案:为什么 `React.cache()` 不够用、如何用 `lru-cache` 构建可复用的

gitblog_00406的博客 1080

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Python 3.3 Tutorial Notes - 7:Class

1. Allow multiple base classes2. namespace: Most namespaces are currently implemented as Python dictionaries3. attribute:      3.1 for any name following a dot — for example, in the expression z.real 

NonStatic的博客 474

蓝牙模块HM-10手册

蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。

The Python Tutorial 9——Classes

Python类概况:多继承、override、多态 9.1. A Word About Names and Objects 9.2. Python Scopes and Namespaces 三种namespace,不同namespace间同名member互不影响 A namespace is a mapping from names to objects. Most namesp

yangcs2009的专栏 711

class node python,ROS/Tutorials

Please ask about problems and questions regarding this tutorial on answers.ros.org. Don't forget to include in your question the link to this page, the versions of your OS & ROS, and also add app...

weixin_35675101的博客 279

图片批量下载实战:Easy-scraping-tutorial教你自动化抓取网络图片

想要快速批量下载网页上的精美图片吗?Python爬虫技术可以帮你实现自动化图片抓取!今天我们将通过 **Easy-scraping-tutorial** 这个开源教程项目,手把手教你如何用Python轻松实现图片批量下载。无论你是设计师需要收集素材,还是普通用户想要保存网页图片,这个简单实用的Python网络爬虫教程都能帮你快速上手。😊 ## 📸 为什么需要图片批量下载? 在日常工作和学习

gitblog_00525的博客 590

python tutorial 学习笔记(六)class

class ClassName( SuperClass ) : A new name space is created, thus all assignments to local variables go into this new namespace. When a class definitition ends, a class object is created. attribute names: __doc__( the fist multil-line string ), __cl

rea_1121的专栏 526

CSS选择器实战指南:Easy-scraping-tutorial精准定位网页元素

想要从海量网页中精准提取数据?CSS选择器是你的必备利器!😊 在Python网络爬虫中,CSS选择器是实现**网页元素精准定位**的核心技术。通过Easy-scraping-tutorial项目,即使是编程新手也能快速掌握这一强大工具。本文将带你深入了解CSS选择器的实战应用,让你轻松应对各种网页数据提取需求。 ## 📊 为什么CSS选择器如此重要? 在网页爬虫开发中,**CSS选择器**

gitblog_00534的博客 337

REST-tutorial安全指南:实现HTTP认证保护API接口

在当今API驱动的开发环境中,保护API接口安全至关重要。REST-tutorial项目提供了一个基于Python的REST API服务器和Javascript客户端,本指南将详细介绍如何通过HTTP认证机制保护API接口,防止未授权访问。 ## 为什么需要API认证? API接口作为应用程序的入口点,一旦缺乏适当的安全措施,可能导致敏感数据泄露、恶意攻击或服务滥用。REST-tutorial

gitblog_00499的博客 397

RxJS 4 Join Patterns 模块实战:用 when、and、thenDo 编排多个 Observable 的协同触发

RxJS(Reactive Extensions for JavaScript)的 Join Patterns 模块将**连接演算(Join Calculus)**带入 JavaScript:它允许你把多个 Observable 序列"绑定"成模式(Pattern),只有当模式中所有序列都有可用值时,才投影并输出结果。本文以 [doc/libraries/lite/rx.lite.joinpatt

gitblog_00427的博客 453

Python Programming with the Java(TM) Class Libraries: A Tutorial for Building Web and Enterprise App

版权声明:原创作品,允许转载,转载时请务必以超链接形式标明文章原始出版、作者信息和本声明。否则将追究法律责任。http://blog.youkuaiyun.com/topmvp - topmvpPython and Java are natural team-mates. Using Python together with the Java class libraries, developers at al

TopMVP 810

Python Tutorial笔记--9.类

看Tutorial的一些问题与解决 九.类 9.3.4 方法对象 class MyClass: """A simple example class""" i = 12345 def f(self): return 'hello world' xf = x.f while True: print xf() 引...

154

REST-tutorial进阶:从基础版到Flask-RESTful版的重构之路

REST-tutorial是一个专注于REST API教学的项目,包含Python编写的服务器和Javascript编写的Web客户端。本文将带你了解如何将基础版Flask服务器平滑升级到Flask-RESTful架构,掌握更专业的API开发方法。 ## 🌟 为什么选择Flask-RESTful重构? Flask作为轻量级Web框架,非常适合快速开发API,但随着项目规模增长,基础版代码会逐

gitblog_00993的博客 1025
上一篇: 《DP学习系列》Longest Valid Parentheses的一些DP细节思考
下一篇: The Search Tree的Python实现(二)
LoveStackover
博客等级 码龄9年 14粉丝 57原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值