本文探讨了如何在OSPF和BGP间通过打tag的方式进行路由过滤，介绍了设置路由映射、邻居配置和路由策略，以实现精确的路由控制。
在ospf和bgp之间路由重发布使用 打tag形式进行路由过滤
set policy route-map BGP-ROUTE-01 rule 100 set tag '4444'
set policy route-map BGP-ROUTE-01 rule 200 set tag '4444'
set policy route-map BGP-ROUTE-01 rule 300 set tag '4444'
set policy route-map BGP-ROUTE-01 rule 400 set tag '4444'
set protocols bgp 65000 neighbor 1.1.1.1 address-family ipv4-unicast route-map import BGP-ROUTE-01
set policy route-map bgp-to-ospf rule 10 action 'deny'
set policy route-map bgp-to-ospf rule 10 match tag '4444'
set policy route-map bgp-to-ospf rule 20 action 'permit'
set protocols ospf redistribute bgp route-map 'bgp-to-ospf'
扫一扫
2725
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
