max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535]

最新推荐文章于 2024-03-20 16:32:54 发布
原创 最新推荐文章于 2024-03-20 16:32:54 发布 · 557 阅读 · 1 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#es #bug #linux #centos #elasticsearch

当安装Elasticsearch时遇到maxfiledescriptors数值过低的问题，可以通过修改/etc/security/limits.conf文件，增加softnofile和hardnofile的值至65536。配置后需重新登录用户使更改生效。然后检查设置是否正确，并重启Elasticsearch服务，问题即可得到解决。

安装Elasticsearsh报错

max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535]
在这里插入图片描述
打开/etc/security/limits.conf
编辑 /etc/security/limits.conf，追加以下内容；

  • soft nofile 65536
  • hard nofile 65536
    此文件修改后需要重新登录用户，才会生效
    登录后使用
    ulimit -S -n
    ulimit -H -n
    查看

在这里插入图片描述
重新启动ES即可，可以正常启动了
在这里插入图片描述

max file descriptors [65535] for elasticsearch process is too low,【已解决】
JavaPub
08-08 1684
注意：如果不生效，可能和命令行的缓存有关，关闭命令行重新打开，再启动 elasticsearch。添加配置：vm.max_map_count=262144，然后执行命令 sysctl -p。
ES系列：解max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536]
NIO4444
05-20 3632
max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536] 每个进程最大同时打开文件数太小，可通过下面2个命令查看当前数量 ulimit -Hn ulimit -Sn 　　修改/etc/security/limits.conf文件，增加配置，用户退出后重新登录生效 soft nofile 65536 hard nofile 65536 ...
es重启报错：max file descriptors [4096] for elasticsearch process is too low, increase to at least 65536
最新发布
weixin_44628096的博客
03-20 1555
max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536]
elasticsearch启动常见问题汇总
06-30 1271
一、max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536] 每个进程最大同时打开文件数量太小，可使用以下命令进行查看 ulimit -Hn ulimit -Sn 解决方法： 修改/etc/security/limits.conf文件，在末尾加上如下两行 ...
elasticsearch启动错误：max file descriptors [65535] for elasticsearch process is too low, increase to at
hs_714828299的博客
09-18 1957
elasticsearch启动错误：max file descriptors [65535] for elasticsearch process is too low, increase to at least [65536] [2019-09-18T18:55:49,901][DEBUG][o.e.a.ActionModule ] Using REST wrapper from pl...
启动ElasticSearch报错[1]: max file descriptors [4096] for elasticsearch process is too low
Struggle99的博客
11-04 6223
报错信息: [1]: max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536] [2]: max number of threads [3818] for user [es] is too low, increase to at least [4096] [...
ES错误：max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535]
Fred-X的博客
01-12 8441
错误信息：max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535] # 在root用户下追加配置 vim /etc/security/limits.conf # 配置内容 *表示所有用户生效 * soft nofile 65536 * hard nofile 65536 # 重新登录即可生效 # 可使用命令查看是否生效 ulimit -H -n ...
elastic安装报错：max file descriptors [4096] for elasticsearch process is too low, increase to at least
编程者说的博客专栏
02-07 8790
一、现象 因为 es 不允许使用root用户安装，在使用新建的es用户安装的时候报错如下， max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535] ERROR: [3] bootstrap checks failed. You must address the points described in the following [3] lines before sta
max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536]
qzqanzc的博客
10-22 699
问题翻译过来就是：elasticsearch用户拥有的可创建文件描述的权限太低，至少需要65536； 解决办法： #切换到root用户修改 vim /etc/security/limits.conf 在最后面追加下面内容 XX hard nofile 65536 XX soft nofile 65536 XX 是启动ES的用户 ...
[1]max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535]
ShiningDays的博客
11-07 509
**重启服务器后，突然导致启动Elasticsearch启动报错： ERROR: [1] bootstrap checks failed [1]: max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535] 百度尝试了很多方法，如： （1）vim /etc/security/limits.conf 修改—将 soft　　nofile和hard　　nofile后的数值变大 #End
ES max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535]
繁星
06-12 1778
原文连接 ：https://www.talkwithtrend.com/Article/31575 网上有好多修改ulimit的文章，但大多仅限于对当前交互shell的修改，如果只是为了提高某一次执行脚本的文件句柄打开数，以下方法非常有效： 操作系统： CentOS 5.1 x86_64 1）修改当前交互终端的limit值 查询当前终端的文件句柄数： ulimit -n 回车，一般的系统默认的1024. 修改文件句柄数为65535，ulimit -n 65535.此时系统的文件句柄数为65535. 2.
ES错误：max file descriptors [4096] for elasticsearch process is too low, increase to at least
m0_67401606的博客
09-02 1688
错误信息：max file descriptors [4096] for elasticsearch process is too low, increase to at least [65535]
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值