墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
400+累计阅读
399平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
在本文中，我将为您介绍如何在HarmonyOS上编写和运行一个简单的"你好，世界！"程序。HarmonyOS是华为公司开发的一种分布式操作系统，旨在为各种设备提供统一的体验。我们将使用HarmonyOS的Java语言来编写这个程序。
让我们开始吧！
步骤1：创建工程
首先，我们需要创建一个HarmonyOS工程。打开HarmonyOS开发者工具，点击"创建新工程"，填写工程名称和目标设备信息。然后，选择一个目录来保存您的工程。
步骤2：创建主界面
在工程创建完成后，我们需要创建一个主界面来显示"你好，世界！“的文本。在工程的src/main/java目录下，创建一个新的Java类，命名为"MainActivity”。
接下来，在MainActivity类中编写以下代码：
import ohos.aafwk.ability.AbilitySlice;
impor华为鸿蒙系统HarmonyOS学习之二：鸿蒙HarmonyOS系统架构
华为鸿蒙系统HarmonyOS学习之二：系统架构
Unity开源游戏源码精选：17个亲测可运行教学项目
Unity游戏开发中，掌握真实项目结构与工程实践远比熟记API更重要。本文围绕‘Unity开源项目’和‘游戏源码’两大核心概念，解析高质量开源资源的本质特征——结构清晰、逻辑可溯、修改即时反馈。从基础的MonoBehaviour生命周期组织，到进阶的ScriptableObject数据驱动、事件总线解耦，再到架构级的DOTS ECS设计与网络同步模式，技术价值在于将抽象原理落地为可调试、可验证、可迁移的代码范式。适用于新手建立开发直觉、中级开发者突破系统设计瓶颈，以及团队构建可维护框架。所有项目均基于Uni
全志 mipi屏幕和触摸驱动调试记录
mipi屏幕与触摸调试记录
从零到一：YOLOv8在边缘设备上的轻量化部署实战
本文详细介绍了YOLOv8在边缘设备上的轻量化部署实战，涵盖模型优化、TensorRT加速、剪枝与知识蒸馏等关键技术。通过工业质检和智能门禁项目案例，展示了如何将YOLOv8高效部署到树莓派、Jetson Nano等资源受限设备，显著提升推理速度和降低内存占用。文章还提供了动态分辨率调整、多模型级联部署等实用技巧，助力开发者实现边缘AI应用的高效落地。
用STC8单片机解码EV1527遥控信号：从波形分析到C代码实现（附完整库）
本文详细介绍了如何使用STC8单片机解码EV1527遥控信号，从波形分析到C代码实现的完整过程。内容包括EV1527协议解析、硬件搭建、信号捕获技巧、解码算法实现及优化策略，并附有完整库代码，帮助开发者快速实现智能家居设备的无线控制。
SRC漏洞挖掘实战指南：从零入门到月入过万的网络安全副业
网络安全的核心在于识别和修复系统缺陷，其中逻辑漏洞与信息泄露是常见的安全风险。其原理在于应用程序在业务逻辑设计或数据处理过程中存在缺陷，导致未授权访问或敏感数据暴露。掌握这些技术对于构建安全的应用体系至关重要，不仅能有效防范攻击，也为安全研究人员提供了将技术能力变现的合法途径。在漏洞赏金（Bug Bounty）和SRC（安全应急响应中心）等应用场景中，白帽子通过系统化的测试方法，挖掘此类漏洞，既能获得经济回报，又能积累宝贵的实战经验。本文聚焦于逻辑漏洞与信息泄露的实战挖掘技巧，为初学者提供清晰的入门路径和效
【fpdlink显示】DS90UB948关于941连接948 GPIO调试问题
1. 前言 使用一个941连接2 948显示: 941的GPIO0/1/2/3到前948的GPIO0/1/2/3和941的D_GPIO0/1/2/3到948的GPIO0/1/2/3。 设置gpio3输出，则941的D_GPIO3设置高，而948的gpio3设置不高; 但设置gpio3输入后，看到941的D_GPIO3跟随948的gpio3变化。 2. 原理图连接 3. 测试代码 static int du90ub941_enable_port(struct goodix_ts_d
CATIA V6二次开发——如何利用CaptureToFile截屏
CaptureToFile 今天给大家分享一个很有趣的功能，如何利用CATIA自带的功能输出模型展示图？ 先上方法： 方法本身并不难，只需要赋予格式及输出路径即可完成该功能。结果如下： 看到这样一张图片不禁让我陷入了沉思，怎么会这么丑???? 那么如何让这个简单的功能变得有趣，图片变得好看点呢？ 第一步：背景换色 第二步：隐藏结构树 ...
qq对接openclaw，通过qq发送命令
把 OpenClaw 接入 QQ 和微信，目前主流的微信文章和教程主要提供了两种截然不同的路径。我为你梳理了它们的核心区别和关键步骤，你可以根据自己的需求来选择。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
Outlook Express 6 (OE6) for Win7/Win8/Win10
英文版 Outlook Express6.0， 兼容Win7/Win10/WinXP，解压就可用。
VC中sqlite的使用
在VC中对sqlite的使用，实现数据库大批数据的快速插入，读取数据库中的数据在ListCtrl中显示
霍尼韦尔SoftMaster使用说明
霍尼韦尔SoftMaster使用说明
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
2万+
扫一扫
