墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
900+累计阅读
967平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
那天，风和日丽。
于是，我开始了模板类的学习。
还记得，写的是模板类的顺序表和双向链表。
但是，编好程之后，程序编译能通过，但是却无法运行。
链接错误。额，那就是间接表明并不是代码出现了什么错误。
那那那那，问题出在哪里呢？
那就是
。
。
。
。
。
WhatsApp注册流程逆向分析：从协议解析到风控对抗实战
移动应用安全分析的核心在于理解客户端与服务端的交互协议与验证机制。通过逆向工程，可以深入剖析应用的数据加密、传输与身份验证原理，这对于构建安全模型、进行自动化测试和风控策略研究具有重要技术价值。在即时通讯、金融支付等高安全要求场景中，掌握应用注册流程的底层实现是评估其安全性的关键。本文聚焦于使用动态分析工具如Frida进行Hook和流量抓包，结合设备指纹识别与模拟器检测技术，详细解析了大型应用的注册风控体系，为安全研究人员和开发者提供了从环境搭建到实战对抗的完整方法。
手把手教 - VSCode 开发 GD32F450 单片机
系统版本：rt-thread v5.2.2单片机型号：GD32F450ZK基于文章进行开发。
ThingsBoard 仪表板状态
请先通过阅读仪表板概述和仪表板入门案例来熟悉ThingsBoard的仪表板。文章希望通过浅显的文字描述什么是仪表板状态及如何使用。 概念 状态功能使得仪表板可以分层,配合小部件的动作,实现多层仪表板之间的跳转.每个状态对应一个仪表板的图层 每个仪表板有一个默认的根状态, 根状态可以理解为默认状态, 也就是打开仪表板默认展示的仪表板图层.编辑模式下, 点击右上角的图标来管理状态.添加多个状态后左上角出现状态切换(图层切换)下拉列表可以通过选中根状态复选框切换新的默认展示的状态/图层配合小部件的动作,实现状
红外图像和可见光图像异源图像配准问题研究
本文旨在研究一种具有高准确率和鲁棒性的融合图像障碍物检测技术，通过把红外和可见光图像进行图像配准和融合，获取高质量的异源融合图像，根据融合图像的特点采用有效的障碍物检测算法，将图像中的障碍物准确检出。......
Python爬虫实战：爬取ETF基金持仓变化
在python复制编辑本文详细介绍了如何使用Python的Scrapy框架爬取ETF基金的持仓变化信息，包括项目的搭建、数据的提取与存储、以及数据的可视化分析。通过本项目，读者可以掌握基本的网页爬虫技术，并应用于实际的财经数据采集与分析中。
YOLOv12改进策略【Neck】| arXiv 2024 MAFPN：多分支辅助特征金字塔网络 | 通过双向辅助融合与异构卷积机制，解决传统PAFPN多尺度特征融合不充分与小目标检测不足问题
本文记录的是利用MAFPN颈部结构改进YOLOv12的目标检测网络模型。通过引入双向辅助融合机制优化特征处理流程，在自底向上路径利用 SAF 模块融合主干浅层特征与颈部输出，并保留浅层空间信息，为小目标检测提供更丰富细节；自顶向下路径通过 AAF 模块建立密集连接，聚合浅层高 / 低分辨率层、同级层及前层特征，均衡各层通道数后实现多向梯度信息交互，增强中 / 大目标特征表达。将其应用到中，解决传统特征金字塔在多尺度信息整合中的不足，提升多尺度目标检测的精度与特征表达的丰富性。Multi-Branch Aux
【RH850/U2A】：HSM与APP通信（中断方式）
HSM与APP通信（中断方式）
华为OD机试新系统真题【仓库盘点】
华为OD机试真题 新系统【仓库盘点】，提供C语言、Java、C++、Python、Go、JavaScript源码实现，并提供完整思路讲解，以及在线OJ模拟做题。华为OD机试真题【仓库盘点】
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版
Part-E1-SDIO-Specification-Ver4.00-Final-120220.pdf：最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版，包括SDIO 接口的外设，SDIO 接口官方协议等。
计算机控制技术及应用
《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术，以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索，主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式，计算机控制系统的数学描述与基本分析方法，以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。
Camera2Demo
在Camera2 的基础上进行封装，使得Camera2一堆初始化逻辑与Activity分离，降低耦合度，完成预览拍照并保存的操作
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
317
扫一扫
