读取boot.img头（根据Android源码中的bootimg.h读取）将kernel和ramdisk读取出来

本文介绍了一个名为bootimg.pl的脚本工具，它可以解析Android系统的boot.img文件，从中提取kernel和ramdisk部分，并输出内核命令行及板子名称等关键信息。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

使用bootimg.pl（linux、win7都可以执行）脚本，该脚本可以读取boot.img头（根据Android源码中的bootimg.h读取）将kernel和ramdisk读取出来，此脚本也会输出内核命令行和板子名字。

root@ckt-desktop:/home/ckt/work# ./split_bootimg.pl disc2/R7627USNSKQLYA113023_shared/out/target/product/msm7627a_vicuna/boot.2knand.img 

		    Page size: 2048 (0x00000800)

		    Kernel size: 3127908 (0x002fba64)

		    Ramdisk size: 194341 (0x0002f725)

		    Second size: 0 (0x00000000)

		    Board name: 

	             Command line: console=ttyMSM0,115200,n8 androidboot.hardware=qcom

		    Writing boot.2knand.img-kernel ... complete.

		    Writing boot.2knand.img-ramdisk.gz ... complete.
		

root@ckt-desktop:/home/ckt/work# ./split_bootimg.pl disc2/R7627USNSKQLYA113023_shared/out/target/product/msm7627a_vicuna/recovery.2knand.img 

		Page size: 2048 (0x00000800)

		Kernel size: 3127908 (0x002fba64)

		Ramdisk size: 438761 (0x0006b1e9)

		Second size: 0 (0x00000000)

		Board name: 

		Command line: console=ttyMSM0,115200,n8 androidboot.hardware=qcom loglevel=7

		Writing recovery.2knand.img-kernel ... complete.

		Writing recovery.2knand.img-ramdisk.gz ... complete.

bootimg.pl源码

#!/usr/bin/perl
use strict;
use warnings;

# Turn on print flushing
$|++;

######################################################################
## Global Variables and Constants

my $SCRIPT = __FILE__;
my $IMAGE_FN = undef;

# Constants (from bootimg.h)
use constant BOOT_MAGIC => 'ANDROID!';
use constant BOOT_MAGIC_SIZE => 8;
use constant BOOT_NAME_SIZE => 16;
use constant BOOT_ARGS_SIZE => 512;

# Unsigned integers are 4 bytes
use constant UNSIGNED_SIZE => 4;

# Parsed Values
my $PAGE_SIZE = undef;
my $KERNEL_SIZE = undef;
my $RAMDISK_SIZE = undef;
my $SECOND_SIZE = undef;

######################################################################
## Main Code

&parse_cmdline();
&parse_header($IMAGE_FN);

=format (from bootimg.h)
** +-----------------+
** | boot header     | 1 page
** +-----------------+
** | kernel          | n pages
** +-----------------+
** | ramdisk         | m pages
** +-----------------+
** | second stage    | o pages
** +-----------------+
**
** n = (kernel_size + page_size - 1) / page_size
** m = (ramdisk_size + page_size - 1) / page_size
** o = (second_size + page_size - 1) / page_size
=cut

my $n = int(($KERNEL_SIZE + $PAGE_SIZE - 1) / $PAGE_SIZE);
my $m = int(($RAMDISK_SIZE + $PAGE_SIZE - 1) / $PAGE_SIZE);
my $o = int(($SECOND_SIZE + $PAGE_SIZE - 1) / $PAGE_SIZE);

my $k_offset = $PAGE_SIZE;
my $r_offset = $k_offset + ($n * $PAGE_SIZE);
my $s_offset = $r_offset + ($m * $PAGE_SIZE);

(my $base = $IMAGE_FN) =~ s/.*\/(.*)$/$1/;
my $k_file = $base . "-kernel";
my $r_file = $base . "-ramdisk.gz";
my $s_file = $base . "-second.gz";

# The kernel is always there
print "Writing $k_file ...";
&dump_file($IMAGE_FN, $k_file, $k_offset, $KERNEL_SIZE);
print " complete.\n";

# The ramdisk is always there
print "Writing $r_file ...";
&dump_file($IMAGE_FN, $r_file, $r_offset, $RAMDISK_SIZE);
print " complete.\n";

# The Second stage bootloader is optional
unless ($SECOND_SIZE == 0) {
    print "Writing $s_file ...";
    &dump_file($IMAGE_FN, $s_file, $s_offset, $SECOND_SIZE);
    print " complete.\n";
}
    
######################################################################
## Supporting Subroutines

=header_format (from bootimg.h)
struct boot_img_hdr
{
    unsigned char magic[BOOT_MAGIC_SIZE];

    unsigned kernel_size;  /* size in bytes */
    unsigned kernel_addr;  /* physical load addr */

    unsigned ramdisk_size; /* size in bytes */
    unsigned ramdisk_addr; /* physical load addr */

    unsigned second_size;  /* size in bytes */
    unsigned second_addr;  /* physical load addr */

    unsigned tags_addr;    /* physical addr for kernel tags */
    unsigned page_size;    /* flash page size we assume */
    unsigned unused[2];    /* future expansion: should be 0 */

    unsigned char name[BOOT_NAME_SIZE]; /* asciiz product name */

    unsigned char cmdline[BOOT_ARGS_SIZE];

    unsigned id[8]; /* timestamp / checksum / sha1 / etc */
};
=cut
sub parse_header {
    my ($fn) = @_;
    my $buf = undef;

    open INF, $fn or die "Could not open $fn: $!\n";
    binmode INF;

    # Read the Magic
    read(INF, $buf, BOOT_MAGIC_SIZE);
    unless ($buf eq BOOT_MAGIC) {
	die "Android Magic not found in $fn. Giving up.\n";
    }

    # Read kernel size and address (assume little-endian)
    read(INF, $buf, UNSIGNED_SIZE * 2);
    my ($k_size, $k_addr) = unpack("VV", $buf);

    # Read ramdisk size and address (assume little-endian)
    read(INF, $buf, UNSIGNED_SIZE * 2);
    my ($r_size, $r_addr) = unpack("VV", $buf);

    # Read second size and address (assume little-endian)
    read(INF, $buf, UNSIGNED_SIZE * 2);
    my ($s_size, $s_addr) = unpack("VV", $buf);

    # Ignore tags_addr
    read(INF, $buf, UNSIGNED_SIZE);

    # get the page size (assume little-endian)
    read(INF, $buf, UNSIGNED_SIZE);
    my ($p_size) = unpack("V", $buf);

    # Ignore unused
    read(INF, $buf, UNSIGNED_SIZE * 2);

    # Read the name (board name)
    read(INF, $buf, BOOT_NAME_SIZE);
    my $name = $buf;

    # Read the command line
    read(INF, $buf, BOOT_ARGS_SIZE);
    my $cmdline = $buf;

    # Ignore the id
    read(INF, $buf, UNSIGNED_SIZE * 8);

    # Close the file
    close INF;

    # Print important values
    printf "Page size: %d (0x%08x)\n", $p_size, $p_size;
    printf "Kernel size: %d (0x%08x)\n", $k_size, $k_size;
    printf "Ramdisk size: %d (0x%08x)\n", $r_size, $r_size;
    printf "Second size: %d (0x%08x)\n", $s_size, $s_size;
    printf "Board name: $name\n";
    printf "Command line: $cmdline\n";

    # Save the values
    $PAGE_SIZE = $p_size;
    $KERNEL_SIZE = $k_size;
    $RAMDISK_SIZE = $r_size;
    $SECOND_SIZE = $s_size;
}

sub dump_file {
    my ($infn, $outfn, $offset, $size) = @_;
    my $buf = undef;

    open INF, $infn or die "Could not open $infn: $!\n";
    open OUTF, ">$outfn" or die "Could not open $outfn: $!\n";

    binmode INF;
    binmode OUTF;

    seek(INF, $offset, 0) or die "Could not seek in $infn: $!\n";
    read(INF, $buf, $size) or die "Could not read $infn: $!\n";
    print OUTF $buf or die "Could not write $outfn: $!\n";

    close INF;
    close OUTF;
}

######################################################################
## Configuration Subroutines

sub parse_cmdline {
    unless ($#ARGV == 0) {
	die "Usage: $SCRIPT boot.img\n";
    }
    $IMAGE_FN = $ARGV[0];
}