centos7时钟相关

CentOS 7系统时间永久设置:硬件时钟、时区与NTP同步详解 在Linux服务器运维中,系统时间管理是确保服务稳定运行的基础技术。其核心原理涉及系统时间与硬件时钟的协同工作,系统时间由内核维护于内存,而硬件时钟则依靠主板电池持久存储。这一机制的技术价值在于为分布式系统、数据库集群和证书验证等场景提供一致的时间基准,避免因时间戳错乱导致的数据不一致或服务中断。应用场景广泛覆盖从单机部署到大规模集群的环境。本文聚焦CentOS 7操作系统,深入解析如何通过timedatectl和hwclock命令,结合NTP服务,实现系统时间的永久准确设置,并特别针对双系统时间冲突、虚拟 阅读详情

centos7已经时间同步,虚拟机挂起后,第二天再次启动时间设置问题

systemctl restart ntpd
ntpq -p // 同步时间

设置系统时间为中国时区并启用NTP同步

yum install ntp // 安装ntp服务
systemctl enable ntpd // 开机启动服务
systemctl start ntpd // 启动服务
timedatectl set-timezone Asia/Shanghai // 更改时区
timedatectl set-ntp yes // 启用ntp同步
ntpq -p // 同步时间

timedatectl 命令

# 读取时间
timedatectl  //等同于 timedatectl status
# 设置时间
timedatectl set-time "YYYY-MM-DD HH:MM:SS"
# 列出所有时区
timedatectl list-timezones
# 更改时区
timedatectl set-timezone Asia/Shanghai
# 或   ln -sf /usr/share/zoneinfor/Asia/Shanghai /etc/localtime     
设置是否与NTP服务器同步
timedatectl set-ntp yes  //yes或者no
将硬件时钟调整为与本地时钟一致
hwclock --systohc --localtime 或 timedatectl set-local-rtc 1
注,硬件时钟默认使用UTC时间,因为硬件时钟不能保存时区和夏令时调整,修改后就无法从硬件时钟中读取出准确标准时间,因此不建议修改。修改后系统会出现警告。
将硬件时间设置成 UTC
hwclock --systohc --utc 或 timedatectl set-local-rtc 1
# 显示硬件时间:
hwclock --show
# 设置硬件时间:
hwclock --set --date ‘08/02/2012 12:00:00’
# 将硬件时间同步到系统时间:
hwclock --hctosys
# 强制把系统时间写入CMOS:
# clock -w

时钟概念
在CentOS 6版本,时间设置有date、hwclock命令,从CentOS 7开始,使用了一个新的命令timedatectl。
(1)UTC
整个地球分为二十四时区,每个时区都有自己的本地时间。在国际无线电通信场合,为了统一起见,使用一个统一的时间,称为通用协调时(UTC, Universal Time Coordinated)。
(2)GMT
格林威治标准时间 (Greenwich Mean Time)指位于英国伦敦郊区的皇家格林尼治天文台的标准时间,因为本初子午线被定义在通过那里的经线。(UTC与GMT时间基本相同,本文中不做区分)
(3)CST
中国标准时间 (China Standard Time)【GMT + 8 = UTC + 8 = CST】
(4)DST
夏令时(Daylight Saving Time) 指在夏天太阳升起的比较早时,将时钟拨快一小时,以提早日光的使用。(中国不使用)

硬件时钟:
RTC(Real-Time Clock)或CMOS时钟,一般在主板上靠电池供电,服务器断电后也会继续运行。仅保存日期时间数值,无法保存时区和夏令时设置。

系统时钟:
一般在服务器启动时复制RTC时间,之后独立运行,保存了时间、时区和夏令时设置。

现象:每隔一段时间,系统时间比BIOS硬件时间走慢几分钟,timedatectl命令看到了NTP synchronized cannot set to yes
CentOS 7.5, 配置过ntpd与某个时间服务器同步后,偶然发现某一个节点的NTP synchronized一直是no:

# timedatectl
      Local time: 二 2019-07-30 09:41:08 CST
  Universal time: 二 2019-07-30 01:41:08 UTC
        RTC time: 二 2019-07-30 01:08:13
       Time zone: Asia/Shanghai (CST, +0800)
     NTP enabled: yes
NTP synchronized: no
 RTC in local TZ: no
      DST active: n/a

停掉ntpd, 执行ntpd -gq重新调整时间后,再启动ntpd:

# systemctl stop ntpd
# ntpd -gq
ntpd: time slew +0.000041s
# systemctl start ntpd

等待一会儿后,NTP synchronized恢复成yes:

# timedatectl
      Local time: 二 2019-07-30 09:44:28 CST
  Universal time: 二 2019-07-30 01:44:28 UTC
        RTC time: 二 2019-07-30 01:44:28
       Time zone: Asia/Shanghai (CST, +0800)
     NTP enabled: yes
NTP synchronized: yes
 RTC in local TZ: no
      DST active: n/a

参考:https://www.jianshu.com/p/6c03ec89bda0

如何在Centos7虚拟机配置时间NTP同步 软件包 chrony-3.4-1.el7.x86_64 已安装并且是最新版本。192.168.10.50 master //IP地址和主机名。已加载插件:fastestmirror。6,在副节点上修改配置文件。 阅读详情

相关推荐

20190315-hadoop集群搭建

文章目录1 基于 VMware workstations 的CentOS7安装1.1 安装虚拟机2 安装CentOS7操作系统2 Linux系统配置2.1 上传安装包2.2 配置时钟同步2.2.1 查看时间2.2.2 时间不一致的解决办法2.3 配置主机名2.3.1 命令设置主机名永久有效2.3.2 配置文件2.3.1 关闭防火墙2.3.2 禁止firewall开机启动2.3.3 查看状态2.5 ...

鲨鱼胃的博客 1213

CentOS 7 设置系统时间的方法

在国际无线电通信场合,为了统一起见,使用一个统一的时间,称为通用协调时(UTC, Universal Time Coordinated)。注,硬件时钟默认使用UTC时间,因为硬件时钟不能保存时区和夏令时调整,修改后就无法从硬件时钟中读取出准确标准时间,因此不建议修改。修改后系统会出现警告。# 或 ln -sf /usr/share/zoneinfor/Asia/Shanghai /etc/localtime。一般在服务器启动时复制RTC时间,之后独立运行,保存了时间、时区和夏令时设置。

littlesmallless的博客 8171

Linux系统NTP服务介绍和部署看这一篇就够了

​ NTP 网络时间协议用来同步网络上不同主机的系统时间。你管理的所有主机都可以和一个指定的被称为 NTP 服务器的时间服务器同步它们的时间。而另一方面,一个 NTP 服务器会将它的时间和任意公共 NTP 服务器,或者你选定的服务器同步。由 NTP 管理的所有系统时钟都会同步精确到毫秒级。在公司环境中,如果他们不想为 NTP 传输打开防火墙,就有必要设置一个内部 NTP 服务器,然后让员工使用内部服务器而不是公共 NTP 服务器。

mohuanfenghuang的博客 1338

centos 7 修改系统时间

修改linux的系统时间,选择北京时区,ntp同步时间

qq120631157的博客 1万+

Ambari搭建

1,配置说明 节点:无硬性要求 操作系统:CentOS-7 内存:8G JDK:jdk1.8.0_151 Mysql:5.7.23 Ambari:2.7.1 HDP:3.0.1 Vmware:WorkStation 15.5 2,配置静态IP vi /etc/sysconfig/network-scripts/ifcfg-ens32 (最后一个为网卡名称) (1)bootproto=static (2)onboot=yes (3)在最后加上几行,IP地址、子网掩码、网关、dns服务器 重启服务 s

weixin_44524441的博客 532

CentOS 部署 NTP 服务器实现时间同步

NTP(Network Time Protocol,网络时间协议)是一种常用的时间同步协议,它可以通过服务器提供准确的时间信息,使得网络中的设备能够同步时间。在本文中,我们将介绍如何在 CentOS 系统上部署 NTP 服务器,以实现时间同步。NTP 服务器将提供准确的时间信息,使得网络中的设备能够同步时间,确保系统正常运行和协调各个设备之间的操作。请注意,为了确保时间同步的准确性和安全性,建议使用可靠的、可信赖的 NTP 服务器源,并配置适当的访问权限和安全措施。列显示了 NTP 服务器的 IP 地址,

OUDKE的博客 825

环境安装-Centos7.4安装及配置

环境安装-Centos7.4安装及配置 〇、资料汇总 一、虚拟机安装 1、下载地址 https://pan.baidu.com/s/1zcOp06HX4OxPdsCCGkHbXQ 提取码:7777 2、安装步骤 https://mp.weixin.qq.com/s/36OhAiYvAmKVGd-QQ26dWg 二、Centos安装 1、安装步骤(CentOS7.4) https://blog.c...

USTSD的博客 1376

BSW:MemMap模块配置及使用

(内存映射(MemMap)模块用于通过内存映射文件将代码和数据映射到特定的内存部分。MemMap生成特定的头文件,其中包含为MemorySection元素和编译器特定指令定义的内存映射预处理器。上面是比较官方的回答,说人话就是把数据和代码放在ECU内指定的地址。初级应用:软件中的bss,data,rodata,code,text,段需要在memory layout中划分具体的物理地址,对于多核系统,要将执行的数据和代码放在目标核的RAM和ROM。

Forever_Oct的博客 3681

CentOS 7 时间, 日期设置 (含时间同步)

from http://blog.itnmg.net/centos-7-time-date/ yum install ntp //安装ntp服务systemctl enable ntpd //开机启动服务systemctl start ntpd //启动服务timedatectl set-timezone Asia/Shanghai //更改时区timedatectl set-ntp yes /...

weixin_30537391的博客 461

R链式中介:如何一次性生成4个变量所有可能的链式中介结果?(含结果解读与粗略作图)#bruceR#ggplot2

一次性生成4个变量所能生成的24种链式中介并作图

weixin_64183017的博客 3238

(53页PPT)新型智慧病房整体解决方案(附下载方式)

当前医疗场景存在三大核心矛盾:院内感染风险(如输液异常发现滞后)、信息孤岛现象(11类业务系统数据割裂)、管理效能不足(30%护理时间耗费在机械性工作)。实际案例显示,整体运营效率提升40%,患者满意度提高28个百分点,真正实现了"让技术有温度,让数据会说话"的价值理念。本文将从需求分析、技术架构、应用场景三个维度,深度剖析这份53页解决方案的创新价值与实践路径。床旁智能终端整合12项功能:包括体征自动采集(误差率<1%)、医嘱执行核对(100%条码校验)、智能床垫离床报警(响应时间3秒)等。

AI_data_cloud的博客 717

linux安装kudu环境变量,Linux安装Kudu+Impala(RedHat or CentOS)

首先查看系统的版本,RedHat和CentOs通过cat /etc/redhat-release查看版本,这里我的系统版本是CentOS Linux release 7.3.1611 (Core)其他系统查看版本参考:https://www.cnblogs.com/wzk-0000/p/7483262.html一、安装Kudu1. 下载cloudera-kudu.repo地址:https://ku...

weixin_36421759的博客 793

LoRaWAN协议-物理层(PHY)详解

目录 1 前言 2 物理层包格式 2.1 LoRa调制 2.2 FSK调制 2.3 LR-FHSS 3 Uplink 4 Downlink 1 前言 如图所示,LoRaWAN是一种开放式网络协议,可提供由LoRa联盟标准化和维护的安全双向通信,移动性和本地化服务。该协议做为MAC层,属于数据链路层。其物理层(PHY)实现与其他设备的通信,目前物理层支持LoRa,FSK,LR-FHSS调制。 下图的PHY只标准了LoRa调制,是因为LoRaWAN实际应用中基...

只想.静静的博客 8775

CentOS7安装Cacti

Cacti是一款优秀的开源监控软件,使用php实现,主要特点是使用snmp服务获取数据,然后用rrdtool存储和更新数据,当用户查看数据的时候,rrdtool生成图表呈现给用户。在CentOS7后,默认数据库为MariaDB,其为MySQL的一个分支,用其存储变量并进行调用。MariaDB数据库并不存储snmp捕获到的数据,snmp捕获到的数据,存在于rrdtoo...

weixin_34239169的博客 371

基于LangGraph的智能报告生成平台项目分析

不知道你是否知道或者了解OpenAI and Gemini Deep Research。他们是一种能够根据输入问题进行规划、结合网络搜索获取信息并最终呈现结果的研究工具或技术。那这样research是如何实现的呢?最近刚好看到一个实现类似功能的开源项目: open_deep_search。本文将基于该项目进行代码层面剖析。

u011160113的博客 925

【数字孪生工业应用实战】第2篇:数字孪生系统架构设计与技术选型——从“作秀”到“实干”的骨架构建

本文系统剖析了数字孪生系统从“作秀”到“实干”的架构设计关键。针对多数项目在POC转生产时因架构混乱、选型盲目而失败的问题,深入阐述了四层分层架构(感知层、传输层、模型层、应用层)的设计原则,重点解析了感知层的异构适配与边缘预处理、传输层的异步解耦与多模式通信等工程细节。结合OPC UA、MQTT、EdgeX Foundry等主流技术选型对比,以及汽车焊装车间边缘智能网关的实战代码,提供了从零搭建微型孪生系统的完整指导。旨在帮助工程师建立清晰的选型决策逻辑,构建稳定、可演进的数字孪生“骨架”。

专注于人工智能、软件开发、工控自动化、工厂数字化及智能化等领域,希望和大家共同进步! 270

CentOS7下Mysql安装与主从 (GTID) 集群搭建详细说明

不可否认Mysql InnoDB Cluster 模式运维具有很高的难度,后期我会逐步的分享相关的运维经验。如果团队中力量相对薄弱,又有高可用的需求,那么Mysql主从是一个不错的选择 。 下文有Mysql5.7.23为例讲解, 本博文讲述的步骤同样适用于Mysql8 和 Mysql 5.7 的其他版本。 本文分四个部分进行讲解: 环境初始化 Mysql数据库安装 主从集群搭建 一、环境初始化 1. 修改系统最大文件打开数,直接执行下列脚本即可 说明: 数据库服务器建议都要调整此...

千木一枝的博客 311

手把手教你安装 OpenClaw 小龙虾(MAC安装教程),一次成功不踩坑

本文详细介绍了在Mac上安装OpenClaw的完整流程。主要内容包括:1)准备工作(磁盘空间、网络环境、终端工具);2)安装Homebrew包管理器及常见问题解决;3)安装Node.js 22+版本(环境核心);4)Git安装与验证;5)OpenClaw项目克隆、依赖安装及运行配置;6)大模型配置方法(以MiniMax为例)。文章提供了详细的命令行操作步骤和常见错误解决方案,特别强调了网络环境要求和Apple Silicon芯片的原生支持注意事项。最后展示了验证配置成功的方法和资源获取渠道。

Chengbei11的博客 6348

Linux安装ntp服务

centos7 # yum install -y ntp 修改配置文件vi /etc/ntp.conf server 127.127.1.0 (server节点添加) fudge 127.17.1.0 stratum 5 (server节点添加) server 192.168.236.135 (clien节点上添加) #systemctl restart ntpd (重启ntp服务) # ntp -p (检查) centos8中一般使用chrony进行时钟同步 https://www.cnb...

qq_36732299的博客 799

YOLOv11涨点改进 | 全网独家创新,损失函数改进篇 | TGRS 2025 | 引入AdaFocalLoss损失函数,改进小目标检测,自适应聚焦小目标与样本分布不平衡,提升检测精度与训练稳定性

本文提出了一种改进YOLOv11模型的AdaFocalLoss损失函数,通过动态调节机制有效提升小目标检测性能。AdaFocalLoss融合了目标尺寸感知和IoU引导的自适应调节,解决了传统损失函数在小目标检测中的样本不平衡问题。该方法自动调整训练权重,无需手动调参,显著提升了模型在多尺度目标、复杂背景下的检测精度和训练稳定性。实验表明,AdaFocalLoss能更好地平衡不同尺度目标的梯度分布,改善边界完整性,减少误检漏检。文章详细介绍了算法原理、实现代码和在YOLOv11中的集成方法,为提升目标检测性能

Ai缝合怪、助力小伙伴高效发论文 338

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

一键安装k8s !!!

一键安装k8s !!! 傻瓜式安装

FK_凡柯的博客 906

华为的C语言编程规范.pdf

华为技术有限公司内部技术规范。本规范制定了编写C语言程序的基本原则、规则和建议。从代码的清晰、简洁、可测试、安全、程序效率、可移植各个方面对C语言编程作出了具体指导。

配置chrony时间同步服务

一、chrony简介 chrony 的优势: 更快的同步,从而最大程度减少了时间和频率误差,对于并非全天 24 小时运行的虚拟计算机而言非常有用 能够更好地响应时钟频率的快速变化,对于具备不稳定时钟的虚拟机或导致时钟频率发生变化的节能技术而言非常有用 在初始同步后,它不会停止时钟,以防对需要系统时间保持单调的应用程序造成影响 在应对临时非对称延迟时(例如,在大规模下载造成链接饱和时)提供了更好的稳定性 无需对服务器进行定期轮询,因此具备间歇性网络连接的系统仍然可以快速同步时钟 chrony官网:https:

xiaochenwj1995的博客 1万+

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

IDEA的使用指南

IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.

时钟同步chrony详解

程序环境: 配置文件:/etc/chrony.conf 主程序文件:chronyd 工具程序:chronyc unit file: chronyd.service 配置文件:chrony.conf server:指明时间服务器地址; allow NETADD/NETMASK 自己作为ntp服务器,让客户端来同步自己的时间 allow all:允许所有客户端主机; deny NETADDR/NETMASK deny all:拒绝所有客户端; bindcmdadd

u010046887的专栏 2736

基于Hadoop的云计算平台配置

Hadoop安装部署 1、实验描述 在若干节点中,安装部署hadoop分布式集群 2、实验环境 虚拟机数量:3 系统版本:Centos 7.5 Hadoop版本: Apache Hadoop 2.7.3 3、相关技能 熟悉Linux操作系统 Hadoop原理 4、知识点 linux系统基础配置 配置JDK 配置hadoop的相关配置文件 掌握hadoop操作指令 5、效果图 hadoop集群安装部署后,启动集群,效果如下: 效果图1:master节点上,这4个进程表示主节点进程启动成功。

一顿吃不饱的博客 1908

hadoop3.0高可用HA大数据平台架构软件和部署方案(二)

hadoop3.0高可用HA大数据平台架构软件和部署方案。

小网管 1510

NTP配置

Centos7 NTP server 搭建。允许源192.168.1.0/24同步时间。查看服务器本地时钟与NTP服务器同步情况。修改授时服务器ntp server。华为CE交换机NTP同步时间配置。华为S交换机NTP同步时间配置。允许所有源IP同步时间。拒绝所有源IP同步时间。

weixin_41023852的博客 595
上一篇: 响应式编程reactive
下一篇: maven工程打包方式介绍
小小白兔兔
博客等级 码龄7年 46粉丝 207原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值