IT6151FN: MIPI to eDP Converter

最新推荐文章于 2025-02-18 18:21:50 发布

原创

最新推荐文章于 2025-02-18 18:21:50 发布 · 756 阅读

11 ·

CC 4.0 BY-SA版权

文章标签：

#信号处理 #信息与通信 #单片机 #音视频 #嵌入式硬件

The IT6151 is a high-performance and low-power MIPI to eDP converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and eDP 1.3 specifications.
IT6151是一款高性能、低功耗的MIPI到eDP转换器，完全符合MIPI D-PHY 1.1、DSI 1.1和eDP 1.3规范。

The IT6151 supports four lanes MIPI RX and four lane eDP TX interface.
IT6151支持四通道MIPI RX接口和四通道eDP TX接口。

The data transfer rate of MIPI RX is up to 1Gbps per lane and both RBR/HBR are supported by eDP TX interface.
MIPI RX的数据传输速率高达每通道1Gbps, eDP TX接口同时支持RBR/HBR。

To reduce the power consumption, Panel Self Refresh (PSR) function is supported by the IT6151.
为了降低功耗，IT6151支持PSR (Panel Self Refresh)功能。

Various low power options are implemented to reduce the dynamic operation power when PSR function is enabled.
实现多种低功耗选项，以降低PSR功能时的动态运行功率。

Dedicated hardware pin or firmware control through I2C can easy set the IT6151 to standby mode, which is the extremely low-power state used for no display condition.