UVA - 270 Lining Up(贪心)

【Web服务器运维】基于Nginx与Keepalived的高可用负载均衡系统部署:实现故障自动切换与虚拟IP管理 内容概要:本文详细介绍了如何通过Nginx与Keepalived实现高可用的负载均衡架构。首先讲解了Nginx的安装部署流程,包括依赖环境的准备、源码解压编译、启动及配置重载;接着介绍了Keepalived的安装步骤及其服务管理方式;重点在于通过配置Keepalived的主备节点(MASTER/BACKUP),结合VRRP协议和虚拟IP(VIP)实现故障自动切换,并通过自定义脚本nginx_check.sh实时检测Nginx运行状态,确保服务高可用;最后补充了在云环境中因组播限制导致心跳不稳定时,应改用单播(unicast)方式进行通信的解决方案。; 适合人群:具备Linux系统操作基础、熟悉网络基础知识,从事运维、DevOps或Web服务部署的技术人员,尤其是工作1-3年的工程师。; 使用场景及目标:①搭建高可用的Web负载均衡系统,避免单点故障;②掌握Nginx与Keepalived协同工作的原理与实战配置方法;③应用于生产环境中提升服务稳定性与容灾能力。; 阅读建议:学习时应结合实验环境动手操作,重点关注keepalived.conf配置差异与nginx_check.sh脚本逻辑,理解VRRP机制及单播替代组播的实际应用场景,注意根据实际网络环境调整IP与网卡参数。 立即下载

 Lining Up 

``How am I ever going to solve this problem?" said the pilot.

Indeed, the pilot was not facing an easy task. She had to drop packages at specific points scattered in a dangerous area. Furthermore, the pilot could only fly over the area once in a straight line, and she had to fly over as many points as possible. All points were given by means of integer coordinates in a two-dimensional space. The pilot wanted to know the largest number of points from the given set that all lie on one line. Can you write a program that calculates this number?

Your program has to be efficient!

Input

The input begins with a single positive integer on a line by itself indicating the number of the cases following, each of them as described below. This line is followed by a blank line, and there is also a blank line between two consecutive inputs.
The input consists of N pairs of integers, where 1 < N < 700. Each pair of integers is separated by one blank and ended by a new-line character. The list of pairs is ended with an end-of-file character. No pair will occur twice.

Output

For each test case, the output must follow the description below. The outputs of two consecutive cases will be separated by a blank line. 
The output consists of one integer representing the largest number of points that all lie on one line.

Sample Input

1

1 1
2 2
3 3
9 10
10 11

Sample Output

3


题目大意:想在给你t组样例,每组用一个空行隔开,每组样例中的每个数代表的是每个点的(x,y),问:你能否找出,最多位于一条直线上的点。

解析:可以先枚举每个点和其他点间的斜率,并将这些斜率存入数组中,并将该数组进行排序,算出最多的斜率数,最多斜率数+1,就是最多位于一条直线上点的个数。

注意:每个样例之间要输出一个空行。

#include <cstdio>
#include <cstring>
#include <algorithm>
using namespace std;
const int N = 10000;
struct P{
	int x,y;
}p[N];
char str[N];
int main() {
	int t;
	double k[N];
	scanf("%d",&t);
	getchar();getchar();
	while(t--) {
		int cnt = 0;
		while(gets(str)) {
			if(str[0] == '\0') {
				break;
			}
			sscanf(str,"%d%d",&p[cnt].x,&p[cnt].y);
			cnt++;
		}
		int sum,max = -1;
		for(int i = 0; i < cnt; i++) {
			int num = 0;
			for(int j = 0; j < cnt; j++) {
				if(i == j) {
					continue;
				}
				if(p[i].x != p[j].x) {
					k[num++] = (double)(p[i].y - p[j].y) / (double)(p[i].x - p[j].x);
				}else {
					k[num++] = 1e-8;
				}
			}
			sort(k,k+num);
			sum = 2;
			for(int j = 0; j < num-1; j++) {
				if(k[j] == k[j+1]) {
					sum++;
				}else {
					sum = 2;
				}
				if(sum > max) {
					max = sum;
				}
			}
		}
		printf("%d\n",max);
		if(t) {
			printf("\n");
		}
	}
	return 0;
}

手把手教你用FreeModbus RTU协议栈实现STM32与PLC通信(附Keil工程) 本文详细介绍了如何使用FreeModbus RTU协议栈在STM32上实现与PLC的工业通信。从环境搭建、工程配置到关键移植接口实现,提供了Keil工程模板和调试技巧,帮助开发者快速掌握Modbus RTU通信技术,适用于工业自动化领域的设备间通信需求。 阅读详情

相关推荐

链式中介效应结果解读:从Bootstrap置信区间到实践意义

本文深入解析链式中介效应结果的解读方法,从Bootstrap置信区间的应用到实践意义的阐述。通过实际案例展示如何分析总效应、直接效应和间接效应,并强调效应量评估的重要性。文章还提供了构建逻辑解释的三步法,以及敏感性分析和报告撰写的实用技巧,帮助研究者准确解读链式中介效应。

weixin_33690367的博客 718

【HDU - 1432 】Lining Up 【几何,三点共线】

How am I ever going to solve this problem?” said the pilot. Indeed, the pilot was not facing an easy task. She had to drop packages at specific points scattered in a dangerous area. Furthermore, the pi

lzs_lazy 415

保姆级教程:在华为MateBook E Go上安装安卓子系统(含Hyper-V配置和地区切换避坑指南)

本文提供在华为MateBook E Go(ARM架构)上安装Windows 11安卓子系统(WSA)的详细指南。重点阐述了ARM平台无需指令转译的流畅原生体验优势,并逐步讲解启用Hyper-V虚拟化、切换系统区域以安装Amazon Appstore、配置开发人员模式及使用ADB安装第三方应用(如华为应用市场)的全过程,助您解锁高效的原生安卓应用生态。

kafka6courier的博客 534

1118 Lining Up

#include using namespace std; int main() { int n,i; while(cin>>n,n!=0) { int x[1000],y[1000]; for(i=0;i>x[i]>>y[i]; } int j,f,sum,max=0; for(i=0;imax) { max=sum; } } } cout这道

a330416020—my_start的专栏 657

Python 爬虫实战:爬取哔哩哔哩知识区,抓取高赞课程信息

哔哩哔哩(Bilibili)是一个广受欢迎的综合性视频社区,其中的知识区汇聚了大量优质的教育、科普、技术等课程内容。本文将指导读者如何使用 Python 爬虫技术从哔哩哔哩知识区抓取高赞课程信息,并进行数据分析。本文深入探究了利用 Python 爬虫技术从哔哩哔哩知识区抓取高赞课程信息的全流程。从前期的环境搭建、模拟登录,到核心的课程数据抓取、存储,再到后续的数据分析与可视化,都详细展开讲解并提供代码支持。通过此方法所获取的数据,能够助力创作者优化内容、用户发现优质课程、平台洞察用户需求。

u014481728的博客 1136

HTOL集成电路老化测试学习总结-20250510

电子元器件的可靠性在产品开发中至关重要,尤其是在微电子技术迅速发展的今天。电子元器件的失效率通常遵循“浴盆曲线”,分为早期失效期、可使用期和老化期。为了评估芯片的可靠性,常采用高温操作寿命测试(HTOL),通过高温和高压加速芯片老化,以筛选出早期失效的芯片并评估其长期可靠性。HTOL测试中,芯片在高温下运行并监控其性能变化,通过阿伦尼乌斯公式计算加速因子,预测芯片的失效率和寿命。此外,Burn-in测试用于加速芯片老化,提前发现并剔除不合格产品,而早期失效率测试(ELFR)则用于评估产品初期使用阶段的可靠性

歌颂苦难的行为是无耻的; 2102

UVA 270 Lining Up 共线点 暴力

题意:给出几个点的位置,问一条直线最多能连过几个点。 只要枚举每两个点组成的直线,然后找直线上的点数,更新最大值即可。 我这样做过于暴力,2.7s让人心惊肉跳。。。应该还能继续剪枝的,同一直线找过之后就可以剪掉了。 代码: /* * Author: illuz * Blog: http://blog.youkuaiyun.com/hcbbt * F

水果君の日常 1563

PCB板Gerber文件的理解和制作

Gerber文件是PCB生产的关键文件,主要包括:1)走线层(GTL/GBL);2)阻焊层(GTS/GBS);3)丝印层(GTO/GBO);4)板框层(GMx/GKO);5)钢网层(Gtp/GBp);6)钻孔文件(NCdrillFiles)。其中1-10项和15项钻孔文件必须提供,建议包含11-14项辅助钻孔层。Gerber文件不含过孔属性,需提前在AD中设置过孔盖油。导出步骤包括:导出非机械层、机械层和钻孔层,新版AD可通过"文件->制造输出->GerberFiles"操作

qq_37999850的博客 853

UVa OJ 题解索引

寂静山林 752

MAC-H3C官网inode客户端下载安装

MAC-H3C官网inode客户端下载安装

兴趣是最好的老师 1万+

嵌入式工程师必学(9):USB 3.0协议理解

USB3.0和USB2.0相比,在线缆上从4根线(Vbus、GND、D+、D-)变为了8根线(Vbus、GND、D+、D-、SSRX+\SSRX-\SSTX+\SSTX-),可见增加的4根线都是和超速相关的,新增加的超速有两类,分别为:超速Gen1(5.0Gbps),超速+Gen2(10Gbps),还兼容USB2.0的3类速率:low-speed(1.5Mbps),full-speed(12Mbps),andhigh-speed(480Mbps)。从设计可以看出,USB3....

码农17年的博客 1万+

UVA - 10057 A mid-summer night's dream.

Problem C A mid-summer night�s dream Input: standard input Output: standard output   This is year 2200AD. Science has progressed a lot in two hundred years. Two hundred years is mentioned here

小G的ACM之路 1314

AI测试实战:手把手教你做LLM(大模型)性能测试「含完整代码」

大模型API性能测试是评估模型服务响应能力、吞吐量和资源效率的关键手段。核心指标包括总响应时间、吐字率、首token延迟、输入/输出tokens数量、QPM等。测试流程涵盖构造负载、并发请求、数据采集和指标计算。优化建议针对吐字率低、首token延迟高、QPM偏低等问题,从模型、硬件、系统等多层面提出解决方案。

blues_C的博客 1431

UVA - 714 Copying Books(二分+贪心)

Copying Books  Before the invention of book-printing, it was very hard to make a copy of a book. All the contents had to be re-written by hand by so called scribers. The scriber had been

小G的ACM之路 1196

汉书HE8,好用的汇编代码编写工具

汉书HE8,好用的汇编代码编写工具早期编写汇编代码所用功能强大

VC中sqlite的使用

在VC中对sqlite的使用,实现数据库大批数据的快速插入,读取数据库中的数据在ListCtrl中显示

UVA - 10905 Children's Game(贪心)

4thIIUCInter-University Programming Contest, 2005 A Children�s Game Input: standard input Output: standard output Problemsetter: Md. Kamruzzaman There

小G的ACM之路 1143

Camera2Demo

在Camera2 的基础上进行封装,使得Camera2一堆初始化逻辑与Activity分离,降低耦合度,完成预览拍照并保存的操作

UVA - 311 Packets(贪心)

Packets  A factory produces products packed in square packets of the same height h and of the sizes  ,  ,  ,  ,  ,  . These products are always delivered to customers in the square parc

小G的ACM之路 1127

SAP B1中文培訓教材_SDK

公司内部培训资料,对开发工具 ,DIAPI, UIAPI,Add-ON有详细解说

UVA - 10954 Add All(贪心+优先队列)

Problem F Add All Input: standard input Output: standard output Yup!! The problem name reflects your task; just add a set of numbers. But you may feel yourselves condescended, to write a C/C++

小G的ACM之路 1075

UVA - 10706 Number Sequence(贪心)

Problem B Number Sequence Input: standard input Output: standard output Time Limit: 1 second A single positive integer iis given. Write a program to find the digit located in the position iin

小G的ACM之路 1060

UVA - 10400 Game Show Math(回溯)

题目大意:给定n个数字,问能否

小G的ACM之路 1032

UVA - 10132 File Fragmentation(贪心)

Question 2: File Fragmentation The Problem Your friend, a biochemistry major, tripped while carrying a tray of computer files through the lab. All of the files fell to the ground and broke. Your f

小G的ACM之路 1007

UVA - 10714 Ants(贪心)

Ants Time Limit: 3000MS   Memory Limit: Unknown   64bit IO Format: %lld & %llu Description Problem B: Ants An army of ants walk on a horizontal pole of le

小G的ACM之路 986

UVA 757 Gone Fishing

题意: 单位时间为5分钟, 给你个数n代表有n个池塘,还有h个小时。 每个池塘有两个属性f,d,f代表池塘单位时间内可以钓到的鱼,d代表每个单位时间池塘可以钓到的鱼会减少d。 在给定每个池塘之间路程所需要的单位时间ti。例如t3代表从2到达3所花的时间。 现在给你n行f,和n行d,和n-1行t 要求出在h小时内,最多能钓到多少鱼,以及在每个池塘花掉的时间,人一开始在第一个池塘。

小G的ACM之路 983

UVA 11389 The Bus Driver Problem(贪心)

题意: 有n个司机,n条下午路线和n条晚上路线,现在要给每个司机安排一条下午路线和一条晚上路线,如果司机的工作时间超过d,则要按照每小时r元增加加班费,问最少需支付多少加班费。 解析: 贪心,下午最大的搭配晚上最小的之和,它和d的差值的和,一定是最小的。 mymy codecode#include <cstdio> #include <cstring> #include <algorithm

小G的ACM之路 963

UVA - 10041 Vito's Family(贪心)

题目大意: 一个黑社会老大要搬家到纽约的某一条街上, 他在那条街上有很多的亲戚朋友,要找到一个地方,使得这个地方走到所有亲戚朋友家的总距离最短,输出总最短距离。 解析: 可以将题目理解为在一个数轴上有r个点,输出其中某个点到所有点距离最短的总和,输出最短距离。注意某个点上可能存在多个重复的点。 贪心,不要被重复点给迷惑了,以为放在点数最多的位置上,总距离最小,其实放在中位数的点距离最小

小G的ACM之路 955

HDU - 5014 Number Sequence(贪心+位运算)

Number Sequence Time Limit: 2000MS   Memory Limit: 65536KB   64bit IO Format: %I64d & %I64u [Submit]   [Go Back]   [Status]   Description There is a special number sequ

小G的ACM之路 941

UVA - 10026 Shoemaker's Problem(贪心)

Shoemaker's Problem  Shoemaker has N jobs (orders from customers) which he must make. Shoemaker can work on only one job in each day. For each ith job, it is known the integer Ti(1i<=1000

小G的ACM之路 939
上一篇: Ubuntu Chromium flash 安装方法
下一篇: UVA - 10057 A mid-summer night's dream.
HelloWorld10086
博客等级 码龄12年 88粉丝 614原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值