Linux内核驱动开发:深入理解KGDB原理与kgdboe配置编程

编程 专栏收录该内容
¥29.90 ¥99.00
372篇文章

KGDB(Kernel GNU Debugger)是Linux内核中一种强大的调试工具,它允许开发人员在内核级别对代码进行调试。本文将详细介绍KGDB的工作原理,并提供使用kgdboe方式配置的示例代码。

KGDB工作原理
KGDB通过在内核中插入断点来实现代码调试。它利用了Linux内核中的调试端口(例如串行端口)与调试主机(通常是开发人员的计算机)之间的通信。以下是KGDB的基本工作流程:

  1. 初始化:开发人员通过配置内核编译选项启用KGDB支持,并在内核启动参数中指定调试端口的信息。

  2. 调试会话建立:开发人员使用调试主机上的GDB工具连接到目标机器的调试端口,建立与内核的通信。

  3. 断点设置:开发人员在GDB中指定需要设置断点的内核代码位置。

  4. 断点触发:当内核执行到设置的断点位置时,它会暂停执行,并将控制权转交给GDB。

  5. 调试操作:在GDB中,开发人员可以查看和修改内核中的变量、执行指令、跟踪函数调用等。

  6. 继续执行:开发人员在调试会话中完成调试操作后,可以选择继续执行内核代码,让其继续执行直到下一个断点或结束。

kgdboe配置编程示例
kgdboe是一种通过以太网连接进行KGDB调试的方式。以下是一个示例代码,展示了如何配置并使用kgdboe进行内核调试。

首先,确保内核编译配置中启用了kgdboe支持。可以通过修改内核配置文件(例如.config)或使用make menuconfig等工具进行设置。

linux内核kgdb调试 从2.6.26开始,Linux 主干内核开始内置了代码级调试器 kgdb。通过 kgdb,可以在内核代码中设置断点,单步调试和观察变量。为了使用 kgdb,需要有两个系统。一个作为上位机,一个作为下位机(目标机)。两台机器通过串口线连接。需要调试的内核运行在下位机上。串口线用于kgdb连接远程目标板。 内核配置 使用KGDB之前,需要在内核中将KGDB配置下: Kerne 阅读详情

相关推荐

arm linux内核源码级调试器kgdb配置与使用

内核源码级调试器kgdb配置与使用

sxw1002的专栏 2589

kgdboe:允许使用网络连接调试 Linux 内核的内核模块

KGDBoE - 以太网上的内核调试 KGDBoE - 一个内核模块,允许使用网络连接调试 Linux 内核。 它在没有串行端口或 JTAG 连接器的现代 PC 上很有用,并且比使用 COM 端口快得多。 KGDBoE 的灵感来自 Jason Wessel 的原始 kgdboe 补丁,但远远超出了原始工具的功能。 主要特点是: 与库存内核一起使用而无需重建它们。 在 Linux 内核 3.8.0-4.1.0 上测试。 配置简单。 无需指定 IP 或 MAC 地址。 支持现代多核系统。 适用于 pcnet32、r8169 和 e1000 网络驱动程序。 建造 git clone https://github.com/dzeromsk/kgdboe.git cd kgdboe make -C /lib/modules/ $( uname -r ) /build M= $( pwd )

使用kgdb调试linux内核及内核模块

使用kgdb调试linux内核及内核模块

C++学习(四六六)Multiple parse contexts are available for this file

Note: Multiple parse contexts are available for this file. Choose the preferred one from the editor menu 参考: "Multiple parse contexts" in Qt creator | Qt ForumHi Do you use sessions? https://bugreports.qt.io/browse/QTCREATORBUG-18521 Anyway, its not.

hankern的专栏 4610

aistudio高效解压zip文件的实用技巧

本文详细介绍了在百度AI Studio平台上高效解压ZIP文件的实用技巧。针对深度学习项目数据准备中的常见痛点,重点讲解了使用Python zipfile库和Linux unzip命令两种核心方法,并提供了路径设置、大文件处理、中文乱码等关键问题的解决方案,帮助用户提升数据处理效率。

salt的博客 792

混合开关电容DCDC变换器技术解析与工程应用指南

在电源设计领域,传统DCDC变换器在高降压比或高升压比场景下,往往面临占空比过窄、开关应力大、效率偏低等瓶颈。开关电容变换器虽能实现固定比例的电压变换,却受限于调节能力。混合开关电容DCDC变换器通过“开关电容网络粗调变比+电感式DCDC细调输出”的策略,兼顾高效率、高功率密度与宽调压范围。本文梳理了其典型拓扑(如2:1/4:1 SC+Buck)、关键对比、控制策略(含软充电)及工程应用中的常见问题,帮助电源工程师在服务器供电、快充、车载电源等场景下快速选型与调试。

weixin_29164185的博客 318

深入MIPI DSI显示技术栈 (三) DSI vs CSI-2:孪生协议的本质差异

MIPI协议中的DSI与CSI-2存在本质差异:DSI为输出导向协议(Host→Display),用于屏幕控制和画面传输;CSI-2为输入导向协议(Sensor→Host),专攻图像采集。二者在包结构、同步机制、物理层优化等方面均有显著区别:DSI支持命令包和BLLP包,CSI-2具备嵌入式数据包;DSI时钟模式以Burst为主,CSI-2支持Continuous模式。典型场景中,二者协同工作(如手机相机预览),需注意时序同步和延迟控制。设计混合系统时,需合理规划虚拟通道和物理层资源,充分发挥这对&quot

GateWorld的博客 2110

模型可解释性分析:基于SHAP的深度探索

SHAP模型可解释性分析摘要 本文系统性地介绍了SHAP(SHapley Additive exPlanations)方法在机器学习模型可解释性分析中的应用。SHAP基于博弈论的Shapley值理论,为特征重要性评估提供了统一框架。文章详细阐述了四种核心算法:Kernel SHAP(模型无关方法)、Tree SHAP(针对树模型的高效算法)、Deep SHAP(适用于深度学习)和Linear SHAP(线性模型专用)。通过Python实现展示了从数据准备到SHAP分析的全流程,包括摘要图、依赖图等可视化技术

huanghm88的专栏 618

电子电器架构 --- OEM企标中规定ECU启动时间的目的

电子电器架构 --- OEM企标中规定ECU启动时间的目的

Soly_kun的博客 225

手把手教你学Simulink——基于Simulink的固态变压器(SST)多级协同控制

摘要:本文详细介绍了基于Simulink的固态变压器(SST)多级协同控制方法。SST作为新一代智能电网核心设备,通过AC-DC整流、DC-DC隔离和DC-AC逆变三级架构实现电能高效转换。针对多级耦合难题,提出能量-功率协同控制策略:纵向解耦电压环与功率前馈,横向联动级间功率指令。在Simulink中搭建10kV/400V系统模型,实现直流母线电压波动<2%的动态性能。特别设计了负载突变时的三级协同机制,通过虚拟惯性算法和前馈控制实现快速响应。文章包含完整的建模步骤、控制推导和参数设置,为电力电子工

MHD0815的博客 198

2026华为OD机试(Python)真题【E卷+A卷+B卷+C卷+D卷】目录+在线OJ

华为OD机试真题题库【E卷+A卷+B卷+C卷+D卷】目录,Python实现。

MISAYAONE的博客 29万+

visio安装包

Microsoft Office Visio 是一款专业的制图软件。利用经过更新的形状、协作工具和数据链接图表,创建专业级图表以简化复杂的信息。

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: Win10自带浏览器的编程功能概述
下一篇: Canvas中的乘号在哪里?
普通网友
博客等级 码龄3年 200粉丝 637原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值