墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
100+累计阅读
77平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
使用boost::mp11::mp_partition_q进行元编程的测试程序
boost::mp11是一个用于元编程的库，其中包含了一组用于操作类型列表的工具函数和模板。其中之一是mp_partition_q函数，该函数可以将一个类型列表按照指定的谓词进行分割，将满足谓词条件的类型放在前面，不满足条件的类型放在后面。
下面是一个使用boost::mp11::mp_partition_q的示例程序：
#include <iostream>
#include <type_traits>
#include 基于ADS1299的8通道脑电采集系统硬件设计实战
生物电信号采集是医疗电子与可穿戴设备中的关键环节，微弱信号的高保真放大与数字化处理直接影响系统性能。高精度模数转换器与低噪声模拟前端设计成为工程实践的核心。ADS1299作为专用生物电测量芯片，集成多通道低噪声放大器与24位Δ-Σ ADC，广泛应用于脑电、心电等生理信号检测。本文基于ADS1299构建8通道脑电采集系统，详细阐述硬件架构、电源与参考设计、输入保护、PCB布局布线、固件SPI配置及数据读取，并结合实测数据分享噪声抑制与调试经验，为EEG采集设备开发提供完整参考。
博途S7-1200与昆仑通态MCGS纯仿真联调实战指南
本文详细介绍了博途S7-1200与昆仑通态MCGS纯仿真联调的实战指南，包括环境搭建、配置步骤、通信桥接及故障排除。通过TIA Portal和MCGS Pro搭建的仿真环境，可实现80%以上的基础功能验证，适用于工业自动化学习和开发，大幅降低硬件投入成本。
CODESYS做Modbus TCP主站踩坑记：从IP配置到数据映射的完整避坑指南
本文详细记录了在CODESYS中配置Modbus TCP主站的全过程，从IP配置到数据映射的常见问题及解决方案。重点解析了网络适配器选择、Slave ID误解、地址偏移陷阱等关键问题，并提供了实用的调试技巧和性能优化建议，帮助工业通信开发者高效避坑。
raw_count、tpm、fpkm、rpkm如何选择
转录组测序中常见的数据类型有：raw_count、tpm、fpkm、rpkm。本文进行简单辨析： 一、概念 1 raw_count RNA-seq数据中，raw_count一般是指mapped到基因外显子区域的reads数目。比如说htseq，STAR，或者RSEM等NGS分析流程计算产生的counts值。其中RSEM(RNA-Seq by Expectation-Maximization)，考虑到一条read 可能会匹配多个exon位置，故而其产生的为expected_count。 2 TPM
嵌入式C开发必备：用Cursor规则搞定代码风格检查（附Pikachu项目实战）
本文以Pikachu开源项目为例，详细介绍了如何利用Cursor的AI代理规则系统，为嵌入式C开发项目配置一套完整的代码风格检查与规范执行方案。通过实战演示，指导开发者创建项目级规则，实现命名、格式、硬件抽象层及驱动开发的自动化规范，从而提升代码一致性、可维护性和团队协作效率。
ESP32-S3开发环境避坑指南：VS Code+ESP-IDF离线安装全流程（附国内镜像加速）
本文提供了一份详细的ESP32-S3开发环境离线安装指南，重点解决网络依赖问题。通过整合国内镜像加速，手把手教你完成VS Code、ESP-IDF框架、工具链及Python依赖的本地化部署，实现稳定、可重复的开发环境搭建，大幅提升IoT开发效率。
Unity零基础到进阶 ☀️| Unity中的 GC及优化 超级全面解析 ☆(ゝω･)v 建议收藏！
介绍： 在游戏运行的时候，数据主要存储在内存中，当游戏的数据在不需要的时候，存储当前数据的内存就可以被回收以再次使用。内存垃圾是指当前废弃数据所占用的内存，垃圾回收（GC）是指将废弃的内存重新回收再次使用的过程。 Unity中将垃圾回收当作内存管理的一部分，如果游戏中废弃数据占用内存较大，则游戏的性能会受到极大影响，此时垃圾回收会成为游戏性能的一大障碍点。 本文我们主要学习垃圾回收的机制，垃圾回收如何被触发以及如何提GC收效率来提高游戏的性能。 Unity内存管理机制简介 要想了解垃圾回收如何工作以及何时被
软件需求规格说明书（SRS）深入解析
摘要： SRS（软件需求规格说明书）是定义系统功能、性能与接口的核心文档，为开发、测试、项目管理提供依据。标准结构包括引言、总体描述、功能/非功能需求、接口等模块。撰写需确保清晰、可验证、无歧义，避免模糊术语。示例展示学生注册模块的需求写法，强调性能与安全性要求。推荐使用Confluence、StarUML等工具辅助编写，交付时需包含主文档、原型图及需求跟踪矩阵。SRS应兼具技术性与管理性，作为沟通桥梁和验收标准。
VC中sqlite的使用
在VC中对sqlite的使用，实现数据库大批数据的快速插入，读取数据库中的数据在ListCtrl中显示
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
android 蓝牙通讯demo
android 下蓝牙通讯demo，实现了发现蓝牙，使能蓝牙，通过蓝牙发送消息。
Data-Structures-and-Algorithm-Analysis-in-Java.pdf
作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
224
扫一扫
