copy data from difrent version hadoop

本文介绍了如何在不同版本的Hadoop集群间迁移数据,使用了distcp命令,并讨论了HDFS中复制因子的管理方法。通过设置dfs.replication参数,用户可以灵活调整文件的副本数量,以适应不同的存储需求。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

I had to copy data from one Hadoop cluster to another recently. However, the two clusters ran different versions of Hadoop, which made using distcp a little tricky.

Some notes of distcp: By default, distcp will skip files that already exist in the destination, but they can be overwritten by supplying the -overwrite option. You can also update only files that have changed using the -update option. distcp is implemented as a MapReduce job where the work of copying is done by maps that run in parallel across the cluster. There are no reducers. Each file is copied by a single map, and distcp tries to give each map approximately the same amount of data, by bucketing files into roughly equal allocations.

The following command will copy the folder contents from one Hadoop cluster to a folder on another Hadoop cluster. Using hftp is necessary because the clusters run a different version of Hadoop. The command must be run on the destination cluster. Be sure your user has access to write to the destination folder.

hadoop distcp -pb hftp://namenode:50070/tmp/* hdfs://namenode/tmp/

Note: The -pb option will preserve the block size.

Double Note: For copying between two different versions of Hadoop we must use the HftpFileSystem, which is a read-only files system. So the distcp must be run on the destination cluster.

The following command will copy data from Hadoop clusters that are the same version.

hadoop distcp -pb hdfs://namenode/tmp/* hdfs://namenode/tmp/

Filed under: HDFSUbuntu No Comments
8OCT/13 0

Using Cloudera Manager I found it very easy to configure single-node Hadoop development nodes that can be used by our developers to test their Pig scripts. However, out of the box dfs.replication is set to 3, which is great for a cluster, but for a single-node development workstation, this throws warnings. I set the dfs.replication to 1, but any blocks written previously are reported as under replicated blocks. Having a quick way to change the replication factor is very handy.

There are other reasons for managing the replication level of data on a running Hadoop system. For example, if you don’t have even distribution of blocks across your DataNodes, you can increase replication temporarily and then bring it back down.

To set replication of an individual file to 4:
sudo -u hdfs hadoop dfs -setrep -w 4 /path/to/file

You can also do this recursively. To change replication of entire HDFS to 1:
sudo -u hdfs hadoop dfs -setrep -R -w 1 /

I found these easy instructions on the Streamy Development Blog.

http://www.developerscloset.com/?cat=76
内容概要:本文详细介绍了扫描单分子定位显微镜(scanSMLM)技术及其在三维超分辨体积成像中的应用。scanSMLM通过电调透镜(ETL)实现快速轴向扫描,结合4f检测系统将不同焦平面的荧光信号聚焦到固定成像面,从而实现快速、大视场的三维超分辨成像。文章不仅涵盖了系统硬件的设计与实现,还提供了详细的软件代码实现,包括ETL控制、3D样本模拟、体积扫描、单分子定位、3D重建和分子聚类分析等功能。此外,文章还比较了循环扫描与常规扫描模式,展示了前者在光漂白效应上的优势,并通过荧光珠校准、肌动蛋白丝、线粒体网络和流感A病毒血凝素(HA)蛋白聚类的三维成像实验,验证了系统的性能和应用潜力。最后,文章深入探讨了HA蛋白聚类与病毒感染的关系,模拟了24小时内HA聚类的动态变化,提供了从分子到细胞尺度的多尺度分析能力。 适合人群:具备生物学、物理学或工程学背景,对超分辨显微成像技术感兴趣的科研人员,尤其是从事细胞生物学、病毒学或光学成像研究的科学家和技术人员。 使用场景及目标:①理解和掌握scanSMLM技术的工作原理及其在三维超分辨成像中的应用;②学习如何通过Python代码实现完整的scanSMLM系统,包括硬件控制、图像采集、3D重建和数据分析;③应用于单分子水平研究细胞内结构和动态过程,如病毒入侵机制、蛋白质聚类等。 其他说明:本文提供的代码不仅实现了scanSMLM系统的完整工作流程,还涵盖了多种超分辨成像技术的模拟和比较,如STED、GSDIM等。此外,文章还强调了系统在硬件改动小、成像速度快等方面的优势,为研究人员提供了从理论到实践的全面指导。
内容概要:本文详细介绍了基于Seggiani提出的渣层计算模型,针对Prenflo气流床气化炉中炉渣的积累和流动进行了模拟。模型不仅集成了三维代码以提供气化炉内部的温度和浓度分布,还探讨了操作条件变化对炉渣行为的影响。文章通过Python代码实现了模型的核心功能,包括炉渣粘度模型、流动速率计算、厚度更新、与三维模型的集成以及可视化展示。此外,还扩展了模型以考虑炉渣组成对特性的影响,并引入了Bingham流体模型,更精确地描述了含未溶解颗粒的熔渣流动。最后,通过实例展示了氧气-蒸汽流量增加2%时的动态响应,分析了温度、流动特性和渣层分布的变化。 适合人群:从事煤气化技术研究的专业人士、化工过程模拟工程师、以及对工业气化炉操作优化感兴趣的科研人员。 使用场景及目标:①评估不同操作条件下气化炉内炉渣的行为变化;②预测并优化气化炉的操作参数(如温度、氧煤比等),以防止炉渣堵塞;③为工业气化炉的设计和操作提供理论支持和技术指导。 其他说明:该模型的实现基于理论公式和经验数据,为确保模型准确性,实际应用中需要根据具体气化炉的数据进行参数校准。模型还考虑了多个物理场的耦合,包括质量、动量和能量守恒方程,能够模拟不同操作条件下的渣层演变。此外,提供了稳态求解器和动态模拟工具,可用于扰动测试和工业应用案例分析。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值