Travel HDU - 5441 (带权并查集+离线)

DDR5内存Training全解析:从信号完整性到CS训练模式的实战指南 本文深入解析了DDR5内存Training的全过程,从信号完整性挑战到CS训练模式(CSTM)的实战应用。文章详细阐述了Training在DDR5高频时代的关键作用,对比了In-Band与OOB两种架构,并拆解了Intel MRC的核心训练步骤,为硬件与固件工程师提供了诊断与优化系统稳定性的实用指南。 阅读详情

Jack likes to travel around the world, but he doesn’t like to wait. Now, he is traveling in the Undirected Kingdom. There are n cities and mm bidirectional roads connecting the cities. Jack hates waiting too long on the bus, but he can rest at every city. Jack can only stand staying on the bus for a limited time and will go berserk after that. Assuming you know the time it takes to go from one city to another and that the time Jack can stand staying on a bus is xx minutes, how many pairs of city (a,b) are there that Jack can travel from city a to b without going berserk?
Input
The first line contains one integer T,T≤5, which represents the number of test case.

For each test case, the first line consists of three integers n,m and qq where n≤20000,m≤100000,q≤5000. The Undirected Kingdom has n cities and m bidirectional roads, and there areq queries.

Each of the following mm lines consists of three integers a,b and d where a,b∈{1,...,n} and d≤100000. It takes Jack dd minutes to travel from city a to city b and vice versa.

Then qq lines follow. Each of them is a query consisting of an integer xx where x is the time limit before Jack goes berserk.

Output
You should print q lines for each test case. Each of them contains one integer as the number of pair of cities (a,b) which Jack may travel from a to b within the time limit x.

Note that (a,b) and (b,a) are counted as different pairs and a and b must be different cities.
Sample Input
1
5 5 3
2 3 6334
1 5 15724
3 5 5705
4 3 12382
1 3 21726
6000
10000
13000
Sample Output
2
6
12
这题我没读懂题意,一直认为在所有一个点到另一个点的用时必须在规定的询问的时间之内,所有一直看不懂样例。
那么在给定时间,则只有小于这个时间的边才是有效边,然后建图,找连通分量的大小即C2n,这个就用带权,并查集实现就好了,现在问题是有多个询问,如果每个询问就重新做一次并查集,那效率太低了,把询问从小到大排序,现在还是面临一个问题,即使如此,如果每次询问以后,都要去线性去扫一遍有多少个连通分量和大小,效率也不高,后来想了挺久,每次询问和询问之间的值是有联系的,就是说可以转移的,那么每次加入边的时候,我们可以把上一次的询问值转移到这次询问值,这样的确高效一些,叫队友一直看这个题就是不看,说了有点看不懂,就是不看,真的烦,早点看,我就A了,感觉现在就是单人模式

#include<cstdio>
#include<algorithm>
#include<cstring>
#define N 2005
#define INF 0x3f3f3f3f
typedef long long ll;
using namespace std;
int n,m,q;
struct node
{
    int x1,x2;
    int w;
}edge[100005];
int cmp1(node p1,node p2)
{
    return p1.w<p2.w;
}
int num[20005];
int pre[20005];
struct node2
{
    int val;
    int index;
}query[5005];
int cmp2(node2 p1,node2 p2)
{
    return p1.val<p2.val;
}
long long ans[5005];
void init()
{
    for(int i=1;i<=n;i++)
    {
        pre[i]=i;
        num[i]=1;
    }

}
int findd(int x)
{
    return pre[x]==x?x:pre[x]=findd(pre[x]);
}
long long get(int x)
{
    return x*x-x;
}
int main()
{
    int t;
    int x,y,w;
    scanf("%d",&t);
    while(t--)
    {
        scanf("%d%d%d",&n,&m,&q);
        init();
        for(int i=0;i<m;i++)
        {
            scanf("%d%d%d",&x,&y,&w);
            edge[i].x1=x;
            edge[i].x2=y;
            edge[i].w=w;
        }
        sort(edge,edge+m,cmp1);
        for(int i=0;i<q;i++)
        {
            scanf("%d",&w);
            query[i].val=w;
            query[i].index=i;
        }
        sort(query,query+q,cmp2);
        long long temp=0;
        for(int i=0,j=0;i<q;i++)
        {
            while(j<m&&(edge[j].w<=query[i].val))
            {
                int xx=findd(edge[j].x1);
                int yy=findd(edge[j].x2);
                if(xx==yy)
                {
                    j++;
                    continue;
                }
                if(num[xx]==1)
                {
                    if(num[yy]==1)
                    {
                        pre[xx]=yy;
                        num[yy]++;
                        temp+=get(2);
                    }
                    else
                    {
                        temp-=get(num[yy]);
                        pre[xx]=yy;
                        num[yy]++;
                        temp+=get(num[yy]);
                    }
                }
                else
                {
                    if(num[yy]==1)
                    {
                        temp-=get(num[xx]);
                        pre[yy]=xx;
                        num[xx]++;
                        temp+=get(num[xx]);
                    }
                    else
                    {
                        temp-=get(num[xx]);
                        temp-=get(num[yy]);
                        pre[xx]=yy;
                        num[yy]+=num[xx];
                        temp+=get(num[yy]);
                    }
                }
                j++;
            }
            ans[query[i].index]=temp;
        }
        for(int i=0;i<q;i++)
            printf("%lld\n",ans[i]);
    }

    return 0;
}
Apache Flink集成HDFS报错Failed to create checkpoint storage at checkpoint coordinator side. 在网上查询相关资料后,在flink的lib目录添加flink-shaded-hadoop-3-3.1.1.7.0.3.0-79-7.0.jar、commons-cli-1.5.0.jar两个包,但报错依旧存在,添加了export HADOOP_CLASSPATH=后面发现是hadoop与flink的兼容性问题,hadoop原先使用的是3.3.4,与多个版本的flink集成都会出现报错,最后将Hadoop的版本改成3.1.3,使用flink run运行jar包就没有这个错误了,在hdfs上成功保存了检查点。 阅读详情

相关推荐

4、设备树的处理(1)

其实到第4节才写设备树的问题完全是因为忘记了,之前有一个版本是先关闭了设备树的,习惯性的认为设备树已经处理完了,失误了!!!前文说过,这个系统是依着荣品的开发板和核心板来的,使用的是5.1内核的SDK。它的SDK里是开发板全功能的,所以设备树也是的。

wsen2012的博客 417

带权并查集

带权并查集

醉蕤的博客 4116

转录组PCA分析3大常见误区:数据标准化、离群样本与批次效应处理

本文深入探讨转录组PCA分析中的三大常见误区:数据标准化、离群样本识别与批次效应处理。通过实战案例和R代码演示,揭示如何优化PCA结果以提升生物学解释力,特别关注数据标准化策略的选择和批次校正方法的应用,帮助研究者避免常见陷阱并获得可靠的转录组分析结果。

weixin_28362173的博客 373

并查集--带权并查集

并查集,树,带权并查集

m0_58642116的博客 1745

数据资产目录(SailCatalog)和数据地图(SailMap)

笔者接下来准备开发大数据平台(XSailboat)中的数据资产目录(SailCatalog)和数据地图(SailMap)相关的功能,本文用以记录笔者关于此部分功能的概念梳理和主体功能设计。

OkGogooXSailboat的博客 2327

【Python机器学习实战】 | 基于PCA主成分分析技术读入空气质量监测数据进行数据预处理并计算空气质量综合评测结果

主成分分析(Principal Component Analysis, PCA)是一种常用的机器学习和数据分析技术,用于降低数据维度、识别数据中的模式、发现变量之间的关系等。

一伦明悦的博客 1263

【数据结构】 带权并查集

带权并查集是指在并查集的基础上,对其中的每一个元素赋有某些值。在对并查集进行路径压缩和合并操作时,这些权值具有一定属性,即可将他们与父节点的关系,变化为与所在树的根结点关系。简而言之,带权值的并查集只不过是在并查集中加入了一个value数组,value数组可以记录很多种东西,不一定是类似距离这种东西,也可以是相对于根节点的状态。

这里是阿安的博客 1911

OsgEarth开发笔记(三):Osg3.6.3+OsgEarth3.1+vs2019x64开发环境搭建(下)

上一篇编译了proj6.2.0、gdal3.2.1,本篇继续。 OsgEarth的编译,是基于Osg和OsgEarth结合在一起的,先要编译Osg,然后编译OsgEarth。OsgEarth的依赖库较多,分为上、中、下三篇,然后单独有一篇如何将编译好的osgEarth集成到Qt中。

长沙红胖子 Qt・西安|省级科研团队从业背景,深耕双一流体系高精尖技术配套研发|剥离高精尖机理,沉淀高端特种行业领域 Qt 工程化落地经验|博文仅分享通用技术总结,输出公开普适工程思路。 4万+

【数据结构】带权并查集

带权并查集的应用

2401_87820834的博客 1569

在 TASKPROCESSING 上为 ABAP OData 服务添加多个系统别名:从原理到落地的完整实践

本文面向SAP Gateway与ABAP开发者,详细讲解如何在TASKPROCESSING OData服务上添加系统别名。首先介绍了系统别名的概念与设计初衷,阐述了添加别名的业务场景需求,包括多系统接入、用户分流和灰度发布等。随后提供了标准配置步骤,从SPRO路径到具体操作说明,并分享了三个实际案例说明如何实现跨区域统一待办、按用户角色分流和灰度发布。最后给出了验证方法和常见问题解决方案,帮助开发者掌握这项基础但关键的配置技能,实现服务路由的可控管理。

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 137

部署OpenClaw(ClawdBot、MoltBot)后访问localhost:18789报1008错误怎么办?

部署openclaw(曾用名ClawdBot、MoltBot)后访问localhost:18789出现1008授权错误❌?本文分享如何快速解决这个问题✅

XiaoqiangClub的博客 1万+

HDU 5441 Travel (带权并查集 离线)

题目 HDU 5441 Travel 题意 n个点,m条边,每条边权值val q次询问,每次有一个值v,将图中所有小于v的边标记出来组成新图,求里面有多少个点对可以相互到达(a -> b 和 b -> a 算两个) 解法 离线并查集,记录每个集合里面点的个数,每次合并两个点数为x, y的集合,对ans的贡献为 \((x+y)\*(x+y-1) - x\*(x-1) - y\*(y-1)...

weixin_30642305的博客 119

使用MATLAB求解二维顶盖驱动流问题的详细代码和说明

本文介绍了使用MATLAB求解二维顶盖驱动流问题的涡量-流函数方法。代码采用129×129网格,雷诺数Re=1000,通过迭代求解Navier-Stokes方程,包含流函数方程和涡量输运方程的离散求解。程序实现了边界条件处理、收敛性检查,并提供丰富后处理功能:流线图、涡量分布图、中心线速度曲线、矢量图和三维涡量可视化。计算结果可与Ghia等(1982)的经典数据进行验证。该代码完整展示了CFD问题的数值求解流程,包括参数设置、主循环计算和多种结果呈现方式,适用于流体力学教学和科研验证。

AI的内部世界的博客 225

hdu 5441 Travel 离线带权并查集

转自:http://www.cnblogs.com/qscqesze/p/4805266.html题目链接: http://acm.hdu.edu.cn/showproblem.php?pid=5441 Description Jack likes to travel around the world, but he doesn’t like to wait. Now, he is trave

行云出岫 247

大中型超市收银系统(可直接运行)

光步前台收银系统系统功能:商品销售、商品退货、挂单、收银员权限、会员销售、单品取消、整单取消、商品查询、脱机销售、脱机数据上传,基本资料下载,开钱箱、小票打印、收款结算,支持多币种付款方式(现金、储值卡、礼券、微信等),支持多种促销。运行环境:.net 4.0登陆信息用户名:1001 密码:123456内置商品信息,商品编码可输入00001000 - 00010000,测试效果相关功能键F5 结算 F9挂单 F11商品查询 F8退货 Insert单品取消 Del整单取消 F12开钱箱F2 会员 Ctrl+Z退出系统 Home 锁屏 相关源码待公开

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过,这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后,重新检测通过。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

HDU 5441 Travel (带权并查集 + 离线操作)

Travel Problem Description Jack likes to travel around the world, but he doesn’t like to wait. Now, he is traveling in the Undirected Kingdom. There are n cities and m bidirectional roads con

Spectacules的博客 698

ssm框架搭建

这个是一个在idea上成功跑起来的ssm框架项目,保存在这里方便以后使用直接下载

HDU 5441 Travel(离线 + 带权并查集)——2015 ACM/ICPC Asia Regional Changchun Online

HDU 5441 Travel(离线 + 带权并查集)——2015 ACM/ICPC Asia Regional Changchun Online

queuelovestack的专栏 1105

HDU 5441 Travel 并查集

HDU 5441 Travel   题意:一张无向图,q个查询,对于每个x,有多少对点之间的路径中最长的一条路不大于x。 思路:比赛时王秋平写的,我补下题。这题也比较简单,将边排序,从小到大加到并查集,对查询也排序,从小到大对于每个查询把不大于x的边加到并查集,用cnt[y]记录以y为根的连通块有多少节点,那么在连通块发生 变化时,ans=2 * cnt[x] * cnt[y]  

Macan - 生活点滴 377

hdu 5441 Travel(生成树)

题目链接:hdu 5441 Travel 类似与最小生成树的算法,将边和询问分别按照权值排序,每次枚举一个询问,将小于该询问的边全部链接,并且计算ans。 #include #include #include #include using namespace std; typedef long long ll; const int maxn = 20005; con

不慌不忙、不急不躁 1088

hdu 5441 Travel 排序 并查集

Travel Time Limit: 1500/1000 MS (Java/Others)    Memory Limit: 131072/131072 K (Java/Others) Total Submission(s): 2149    Accepted Submission(s): 740 Problem Description Jack likes to trav

G.D.Retop的专栏 499

hdu5441 Travel

题目TravelProblem Description Jack likes to travel around the world, but he doesn’t like to wait. Now, he is traveling in the Undirected Kingdom. There are n cities and m bidirectional roads connecting

痕 1200

HDU 5441 Travel

HDU 5441 Travel #include #include #include #include #include #include #include #define maxn 100005 #define INF 0x3fffffff #define ll __int64 #define mod 10000007 #define N 20005 #define M 100005 usin

mitic的博客 418

hdu 5441 Travel(带权并查集)

题目:http://acm.hdu.edu.cn/showproblem.php?pid=5441 Travel Time Limit: 1500/1000 MS (Java/Others)    Memory Limit: 131072/131072 K (Java/Others) Total Submission(s): 1586    Accepted Submission(s

theArcticOcean 764

HDU 5441 Travel(离线操作,并查集)

题目链接:HDU 5441 Travel 题目大意: 有一个n个点的无向图,给出m条边的边权,给出q次询问,每次给出一个值,求用到所有边权不大于这个值的边的情况下,能够互相到达的点对的个数(自己到自己不算) (a,b) (b,a) 不同当且仅当a!=b 当时做的时候思路很快就想出来了,就是每次把满足条件的点分成不同的集合,每个集合的点互相可达,每个集合正好构成无...

weixin_30767921的博客 89

【HDU 5441】Travel

Jack likes to travel around the world, but he doesn’t like to wait. Now, he is traveling in the Undirected Kingdom. There arenncities andmmbidirectional roads connecting the cities. Jack hat...

词庸 549

hdu 5441 Travel(Kruskal+离线)

题目链接:http://acm.hdu.edu.cn/showproblem.php?pid=5441 题意: 给定N个顶点,M条边的一个无向图,Q个询问。 对于每个询问x,从a,b的路径上各边的最大权值小于x,可以记为有序对, 求这个图里面有多少个这样的有序对。 解题思路:kruskal思想+离线。首先把边从小到大排序,对于某个限制limit,如果边小于等于limit,则表示这条边是

hexianhao的博客 618
上一篇: Car HDU - 5935(???)
下一篇: Squarefree number HDU - 3826(数论)
coldfresh
博客等级 码龄10年 107粉丝 405原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值