数据结构——浙大版中国大学mooc(week10)

Vue 实现华视身份证读卡器功能 在www.downcc.com下载“华视cvr100驱动”安装程序; 华视电子官网有相应的文档说明和程序下载 一、服务安装 选择安装目录: 启动读卡服务: 安装成功会有如图所示: 注意事项: 安装开发包必须使用管理员权限,因为windows服务和读卡器设备驱动程序均需要管理员权限,否则会安装失败。 win10需要修改组策略才有管理员权限。 二、服务的使用 打开浏览器,输入地址http://127.0.0.1:19196/mainpage,回车 点击openDevice: 点. 阅读详情

课程给出代码

C语言:快速排序

/* 快速排序 - 直接调用库函数 */
 
#include <stdlib.h>
 
/*---------------简单整数排序--------------------*/
int compare(const void *a, const void *b)
{
   
    /* 比较两整数。非降序排列 */
    return (*(int*)a - *(int*)b);
}
/* 调用接口 */ 
qsort(A, N, sizeof(int), compare);
/*---------------简单整数排序--------------------*/
 
 
/*--------------- 一般情况下,对结构体Node中的某键值key排序 ---------------*/
struct Node {
   
   
    int key1, key2;
} A[MAXN];
  
int compare2keys(const void *a, const void *b)
{
   
    /* 比较两种键值:按key1非升序排列;如果key1相等,则按key2非降序排列 */
    int k;
    if ( ((const struct Node*)a)->key1 < ((const struct Node*)b)->key1 )
        k = 1;
    else if ( ((const struct Node*)a)->key1 > ((const struct Node*)b)->key1 )
        k = -1;
    else {
   
    /* 如果key1相等 */
        if ( ((const struct Node*)a)->key2 < ((const struct Node*)b)->key2 )
            k = -1;
        else
            k = 1;
    }
    return k;
}
/* 调用接口 */ 
qsort(A, N, sizeof(struct Node), compare2keys);
/*--------------- 一般情况下,对结构体Node中的某键值key排序 ---------------*/
/* 快速排序 */
 
ElementType Median3( ElementType A[], int Left, int Right )
{
   
    
    int Center = (Left+Right) / 2;
    if ( A[Left] > A[Center] )
        Swap( &A[Left], &A[Center] );
    if ( A[Left] > A[Right] )
        Swap( &A[Left], &A[Right] );
    if ( A[Center] > A[Right] )
        Swap( &A[Center], &A[Right] );
    /* 此时A[Left] <= A[Center] <= A[Right] */
    Swap( &A[Center], &A[Right-1] ); /* 将基准Pivot藏到右边*/
    /* 只需要考虑A[Left+1] … A[Right-2] */
    return  A[Right-1];  /* 返回基准Pivot */
}
 
void Qsort( ElementType A[], int Left, int Right )
{
   
    /* 核心递归函数 */ 
     int Pivot, Cutoff, Low, High;
       
     if ( Cutoff <= Right-Left ) {
   
    /* 如果序列元素充分多,进入快排 */
          Pivot = Median3( A, Left, Right ); /* 选基准 */ 
          Low = Left; High = Right-1;
          while (1) {
   
    /*将序列中比基准小的移到基准左边,大的移到右边*/
               while ( A[++Low] < Pivot ) ;
               while ( A[--High] > Pivot ) ;
               if ( Low < High ) Swap( &A[Low], &A[High] );
               else break;
          }
          Swap( &A[Low], &A[Right-1] );   /* 将基准换到正确的位置 */ 
          Qsort( A, Left, Low-1 );    /* 递归解决左边 */ 
          Qsort( A, Low+1, Right );   /* 递归解决右边 */  
     }
     else InsertionSort( A+Left, Right-Left+1 ); /* 元素太少,用简单排序 */ 
}
 
通过Robotstudio修改机器人程序的具体方法和步骤 阅读详情

相关推荐

PyTorch版Unet训练后别只看loss:手把手教你计算并可视化多类别语义分割的mIoU(附完整代码)

本文详细介绍了在PyTorch中使用Unet模型进行多类别语义分割后,如何计算和可视化mIoU(mean Intersection over Union)以全面评估模型性能。通过完整的代码示例和实用技巧,帮助开发者从loss优化转向更精准的区域分割评估,特别适用于医学图像分析等关键场景。

weixin_30906185的博客 435

网络安全学习路线是怎样的?

为什么要学习安全? 近几年网络安全事件层出不穷,相信大家哪怕没遇到过,但也听过不少了吧。如服务器遭受入侵被黑,用户帐号被盗;被钓鱼、勒索病毒等,这些一旦发生,对企业而言都是不小的打击。因此,网络安全不容忽视,同时随着时代的不断发展,公司对于运维及网络工程师要求也越来越严格。未来越来越吃香的一定是技能方向广的复合型人才。网络安全可以说是一条非常好的发展道路。 今年两会期间,全国政协委员,360集团创始人、董事长周鸿祎提交了关于网络安全行业特殊人才的提案,为广大白帽子人员争取更好...

网安技术分享 8707

Ubuntu 22.04下Nvidia显卡驱动安装全攻略:从PPA源到避坑指南

本文详细介绍了在Ubuntu 22.04系统下安装Nvidia显卡驱动的完整流程,包括PPA源的使用、旧驱动清理、安装后验证及常见问题解决方案。特别针对机器学习开发者和图形设计师,提供了从基础安装到性能调优的全方位指南,帮助用户避免常见安装陷阱并优化GPU性能。

weixin_29213655的博客 382

步进电机梯形加减速算法的实现

步进电机梯形加减速算法的实现

m0_69251699的博客 1318

iOS Certificates, Identifiers & Profiles简介

1. Certificates Certificates是生成开发和生产所需的证书。 2.1 certSigningRequest文件 生成证书前,需要先生成certSigningRequest文件,certSigningRequest文件由【钥匙串访问】生成。 选择菜单【钥匙串访问】,【证书助理】下的【从证书颁发机构请求证书…】 填写【用户电子邮件地址: 】,将【请求是:】的选项改为【储存到磁盘】 输入certSigningRequest文件的文件名,并指定保存位置。 保存certSignin

假装你是大灰狼的专栏 7061

2023最新多文明策略手游《万国觉醒内购版》最新整理Linux商业手工服务端+安卓+详细搭建教程

2023最新多文明策略手游《万国觉醒内购版》最新整理Linux商业手工服务端+安卓+详细搭建教程。源码内置详细搭建教程,感兴趣可自行下载。

百创科技 1716

最新Codex接入DeepSeek官方API教程(无需cc-switch)

最新Codex接入DeepSeek官方API教程(无需cc-switch)

猿小白的博客 975

[QMT量化交易小白入门]-九、如何用Python记录每一笔交易和调试,报错信息?

定义一个函数来获取日志记录器。: 返回全局的日志记录器,以便在其他地方调用。

木头大左的博客 2146

VB摄像头监控

该VB模块可对摄像头捕获的画面进行录像等,可在创建的窗口进行控制

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

蓝牙模块HM-10手册

蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

上一篇: 数据结构——浙大版中国大学mooc(week9)
CodingW
博客等级 码龄8年 3粉丝 16原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值