墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
100+累计阅读
109平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
使用boost::mp11::mp_similar进行类型判别的测试程序
在C++11标准引入了可变参数模板后，我们能够定义可接受不定数量参数的函数和类模板。然而，在对这些参数进行处理时，我们往往需要区分它们的类型并对它们进行不同的操作。这时，一个有效的方式是使用模板元编程。
boost::mp11是一个C++库，提供了一组方便的模板元编程工具。其中，mp_similar工具可以用于比较两个类型是否相同，或者判断一个类型是否与多个类型中的任意一个相同。
下面是一个简单的示例程序，演示了如何使用mp_similar来实现一个计算器，支持加减乘除四则运算。
#include <iostream>
#include <type_traits>
CANape快速上手
文章帮助记录CANape学习过程。
宏杉MacroSan存储开局指导-流程
目录 1. 导入ODSP授权 2.1.版本确认 2.2.存储设备升级U盘、升级光盘制作方法 开局流程如下： 1. 导入ODSP授权 ODSP授权文件随设备附带,拆箱可见 2.1.版本确认 java模式 html模式 2.2.存储设备升级U盘、升级光盘制作方法 准备工具 空白U盘： 1个，容量要求大于等于4GB。仅制作升级U盘时需要。 制作升级U盘步骤 1.将U盘插入PC机USB口，保证PC机能识别到U盘。 2.运行UltraISO，选择菜单中的 文件-&g...
倍福TC3 PLC高速采集实战：如何用PLC-Recorder实现0.24ms级时间戳同步
本文详细介绍了倍福TC3 PLC与PLC-Recorder实现0.24ms级时间戳同步的工程实践方案。通过硬件拓扑设计、时间源选择优化、报文结构封装及同步验证方法，为工业自动化领域的高精度数据采集提供了可靠解决方案，特别适用于精密装配、激光切割等微秒级同步要求的场景。
SolidWorks软件安装管理程序在创建该注册表项时遇到错误: UNKNOWN\Components的解决方案
SolidWorks软件安装管理程序在创建该注册表项时遇到错误: UNKNOWN\Components的解决方案
工程经验分享：PCIE（1）
本文介绍AXI Bridge For Pcie Express Gen3 Subsystem 的使用方法。这个IP兼具简单与实用性，将PCIE协议层实现于内部，仅留出AXI接口供开发者使用。开发者不需要处理复杂的PCIE协议数据，只需要对AXI总线有所了解即可，十分符合Xilinx一贯的开发风格。本文无关PCIE协议本身，仅分享实用性的工程经验，以PCIE IP为核心，一步一步搭建一个简单的子系统，以此说明用法。文中所有内容均已通过项目检验。
《RT-Thread入门与实战》第1章：RT-Thread概述与核心优势
2006年由熊谱翔发起2017年成立上海睿赛德电子科技公司2021年成为国内首个通过ISO 26262 ASIL-D认证的RTOS。
2. Android_逆向的历史与发展
学完本节，希望你能够：了解 Android 逆向工程的发展历程，从早期 APK 破解到现代应用保护；入门先把这几类「在干啥」搞清楚，后面学脱壳、反反调试会顺很多。（反编译 APK 得到的类汇编代码，相当于程序的「菜谱」）就能绕过验证，到后来混淆、加固、反调试一起上，逆向难度越来越高。（第三节 什么是 CPU 指令集），帮你搞清楚「反汇编看到的那些指令」是从哪来的、和 Android 逆向有啥关系。有必要——先搞清「没加固时怎么玩」，再学脱壳和对抗，思路才顺。读起来费劲，但逻辑还在，耐心一点还能跟。
5、Visual Studio Code：强大的编码与文件管理功能
本文详细介绍了 Visual Studio Code 的强大编码与文件管理功能，涵盖代码导航、引用查找、符号重命名、实时代码分析、IntelliCode 提示、文件和文件夹操作等内容。通过功能对比、流程图和实际开发案例，展示了 VS Code 如何提升开发效率和代码质量，适用于各类编程语言和项目开发场景。
廖雪峰Python教程[完整版]
廖雪峰的python教程整理的，已经排好版了，而且还是完整的，适合小白
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
汉书HE8，好用的汇编代码编写工具
汉书HE8，好用的汇编代码编写工具早期编写汇编代码所用功能强大
ET2012新版免狗免安装绿色软件
ET2012新版免狗免安祖昂绿色软件。，新界面，新视觉，
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
1万+
扫一扫
