Primary VGA BIOS

最新推荐文章于 2021-09-23 11:11:38 发布

ChinaXuQ

最新推荐文章于 2021-09-23 11:11:38 发布

阅读量752

点赞数

文章标签： system up

本文详细介绍了如何通过调整BIOS设置中的Primary VGA BIOS选项，选择最适合当前使用的图形卡类型（AGP VGA卡或PCI VGA卡），以实现优化系统启动速度。特别适用于使用单一图形卡的情况，通过正确配置可以显著减少系统检测和初始化图形卡所需的时间。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

This BIOS feature allows you to select whether to boot the system using the AGP graphics card or the PCI graphics card. This is particularly important if you have AGP and PCI graphics cards but only one monitor.

If you are only using a single graphics card, then the BIOS will detect it as such and boot it up, irrespective of what you set the feature to. However, there may be a slight reduction in the time taken to detect and initialize the card if you select the proper setting for this BIOS feature. For example, if you only use an AGP graphics card, then setting Primary VGA BIOS to AGP VGA Card may speed up your system's booting-up process.

Therefore, if you are only using a single graphics card, it is recommended that you set the Primary VGA BIOS feature to the proper setting for your system (AGP VGA Card for a single AGP card and PCI VGA Card for a single PCI card).

But if you are using multiple graphics cards, it is up to you which card you want to use as your primary display card. It is recommended that you select the fastest graphics card as the primary display card.