2021-05-23

最新推荐文章于 2023-01-01 19:38:56 发布
最新推荐文章于 2023-01-01 19:38:56 发布
阅读量353 收藏
点赞数
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/CADEYP/article/details/117173698

静态综合

在这里插入图片描述

R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip ad
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 30
May 22 2021 23:32:11-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip ad
[R1-GigabitEthernet0/0/1]ip address 192…168.1.5 30
^
Error: Wrong parameter found at ‘^’ position.
[R1-GigabitEthernet0/0/1]ip address 192.168.1.5 30
May 22 2021 23:32:59-08:00 R1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]q
[R1]int lo 1
[R1-LoopBack1]ip ad
[R1-LoopBack1]ip address 192.168.1.129 29
[R1-LoopBack1]int to 2
^
Error: Unrecognized command found at ‘^’ position.
[R1-LoopBack1]int lo 2
[R1-LoopBack2]ip ad
[R1-LoopBack2]ip address 192.168.1.137 29
[R1-LoopBack2]
R2

sy
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname R2
[R2]INT G0/0/0
[R2-GigabitEthernet0/0/0]ip ad
[R2-GigabitEthernet0/0/0]ip address 192.168.1.2 30
May 22 2021 23:35:07-08:00 R2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip ad
[R2-GigabitEthernet0/0/1]ip address 192.168.1.9 30
May 22 2021 23:35:46-08:00 R2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R2-GigabitEthernet0/0/1]int lo 1
[R2-LoopBack1]ip ad
[R2-LoopBack1]ip address 192.168.1.145 29
[R2-LoopBack1]int lo 2
[R2-LoopBack2]ip ad
[R2-LoopBack2]ip address 192.168.1.153 29
[R2-LoopBack2]

R3

sy
Enter system view, return user view with Ctrl+Z.
[Huawei]SY
[Huawei]sysname R3
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip ad
[R3-GigabitEthernet0/0/0]ip address 192.168.1.161 28
May 22 2021 23:40:05-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]ip ad
[R3-GigabitEthernet0/0/0]undo ip ad
[R3-GigabitEthernet0/0/0]undo ip address 192.168.1.161 28
May 22 2021 23:41:13-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the DOWN state.
[R3-GigabitEthernet0/0/0]ip ad
[R3-GigabitEthernet0/0/0]ip address 192.168.1.6 30
May 22 2021 23:41:32-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]int g0/0/1
[R3-GigabitEthernet0/0/1]ip ad
[R3-GigabitEthernet0/0/1]ip address 192.168.1.14 30
[R3-GigabitEthernet0/0/1]
May 22 2021 23:41:59-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R3-GigabitEthernet0/0/1]int g0/0/2
[R3-GigabitEthernet0/0/2]ip ad
[R3-GigabitEthernet0/0/2]ip address 192.168.1.161 28
[R3-GigabitEthernet0/0/2]
May 22 2021 23:42:33-08:00 R3 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[R3-GigabitEthernet0/0/2]q
[R3]dh
[R3]dhcpen
[R3]dhcp en
[R3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[R3]int g
^
Error:Incomplete command found at ‘^’ position.
[R3]int g
[R3]int GigabitEthernet 0/0/2
[R3-GigabitEthernet0/0/2]dh
[R3-GigabitEthernet0/0/2]dhcp s
[R3-GigabitEthernet0/0/2]dhcp selectg
[R3-GigabitEthernet0/0/2]dhcp select g
[R3-GigabitEthernet0/0/2]dhcp select global
[R3-GigabitEthernet0/0/2]q
[R3]g

[R3]ip po 0
Info: It’s successful to create an IP address pool.
[R3-ip-pool-0]net
[R3-ip-pool-0]netbios-type
[R3-ip-pool-0]network
[R3-ip-pool-0]netbios-type
[R3-ip-pool-0]network
[R3-ip-pool-0]netbios-type
^
Error:Incomplete command found at ‘^’ position.
[R3-ip-pool-0]net
[R3-ip-pool-0]network 192.168.1.161
[R3-ip-pool-0]dns
^
Error:Incomplete command found at ‘^’ position.
[R3-ip-pool-0]dns
[R3-ip-pool-0]dns-list 4.4.4.4
[R3-ip-pool-0]q
[R3]
R4

sy
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname R4
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ipad
[R4-GigabitEthernet0/0/0]ip ad
[R4-GigabitEthernet0/0/0]ip address 192.168.1.10 30
May 22 2021 23:46:06-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip ad
[R4-GigabitEthernet0/0/1]ip address 192.168.1.13 30
[R4-GigabitEthernet0/0/1]
May 22 2021 23:46:49-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R4-GigabitEthernet0/0/1]int g//2
^
Error: Unrecognized command found at ‘^’ position.
[R4-GigabitEthernet0/0/1]int g0/0/2
[R4-GigabitEthernet0/0/2]ip add 192.168.1.17 30
[R4-GigabitEthernet0/0/2]
May 22 2021 23:47:32-08:00 R4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[R4-GigabitEthernet0/0/2]
[R4-GigabitEthernet0/0/2]q
[R4]int g0/0/4
^
Error: Wrong parameter found at ‘^’ position.
[R4]int g4/0/0
[R4-GigabitEthernet4/0/0]ip ad 192.168.1.21 30
[R4-GigabitEthernet4/0/0]
May 22 2021 23:48:20-08:00 R4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet4/0/0 has entered the UP state.
[R4-GigabitEthernet4/0/0]int lo 1
[R4-LoopBack1]ip ad
[R4-LoopBack1]ip address 192.168.1.177 28
[R4-LoopBack1]
R5
sy
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname
[Huawei]sysname R5
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip ad 192.168.1.18 30
May 22 2021 23:49:42-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R5-GigabitEthernet0/0/0]int g0/0/1
[R5-GigabitEthernet0/0/1]ip ad 183.1.1.1 24
May 22 2021 23:50:18-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R5-GigabitEthernet0/0/1]int g0/0/2
[R5-GigabitEthernet0/0/2]ip ad 192.168.1.22 30
[R5-GigabitEthernet0/0/2]
May 22 2021 23:50:35-08:00 R5 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[R5-GigabitEthernet0/0/2]int lo 1
[R5-LoopBack1]ip ad 192.168.1.177 28
[R5-LoopBack1]
R6
sy
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname R6
[R6]INT G0/0/0
[R6-GigabitEthernet0/0/0]ip ad 183.1.1.2 24
May 22 2021 23:52:02-08:00 R6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R6-GigabitEthernet0/0/0]int lo 1
[R6-LoopBack1]ip ad 184.1.1.1 24
[R6-LoopBack1]

小爷累了
关注
(VIP-朝夕教育)2021-05-23 .NET高级班 02-反射
微软MVP Eleven
05-23 6万+
原理图 /// <summary> /// 1 dll-IL-metadata-反射 /// 2 反射加载dll，读取module、类、方法 /// 3 反射创建对象，反射+简单工厂+配置文件 ，破坏单例 创建泛型 /// 反射反射程序员的快乐 /// 反射是无处不在，MVC AOP IOC ORM Attribute /// IL:中间语言，标准的面向对象语言，但是不太好阅读 /// metadata:元数据, 数据清单，只是
2021-05-23unity【Message响应事件】
unity笔记
05-24 449
【Message响应事件】 1.【Message 响应事件】（即事件函数）（可从官网查看解释）-（位置：[Scripting API]-UnityEngine--Casses--MonoBehaviour-）（点击任一组件的？问号即可到达官网） （注：加★星号的表示有讲解） - ⒈启动与刷新函数 - ⑴启动 - ①Reset()★ - ②Awake()★ - ③Start()★ - ⑵刷新 - ...
HCIP实验一
m0_52607200的博客
01-11 1058
1.AR6（isp）仅配置IP地址，其他接口配置缺省路由 2.划分 3.配置环回接口 4.dhcp协议，配置AR3，电脑端自动获取IP地址 5.配置空接口，避免环路 6.配置静态路由，全网可通 7.配置telnet，做server映射 8.配置路由优先级，取61（默认60） 划分子网（192.168.1.0/24） 骨干192.168.1.0/27 AR1 192.168.1.32/27 192.168.1.32/28 192.168.1.48/28 ...
rip......
m0_74812057的博客
11-22 369
.
【无标题】
m0_74812084的博客
11-14 319
【代码】【无标题】
VRRP实验
zhangyasuo的博客
08-25 354
目录拓扑图配置总结 拓扑图 配置 配置LSW1 <Huawei> <Huawei>undo terminal monitor Info: Current terminal monitor is off. <Huawei>user-interface console 0 ^ Error: Unrecognized command found at '^' position. <Huawei>sys Enter system view, ret
作业11.18
zhuqifan0412的博客
11-18 471
作业
panic-full-2021-11-23-231447.000.ips
11-24
panic-full-2021-11-23-231447.000.ips
2021-5-7.txt
08-04
长江武汉段AIS暗码，供大家解码学习使用（其实我就是想赚点积分555）
2021-05-23unity发布PC端
unity笔记
05-23 640
发布PC端 1【发布PC端】（文件--生成设置--）（前提：需要在安装Unity时-将要打包的平台模块都添加上） - ┃①（首先在左侧选择平台、eg：PC） - ┃②（[添加已打开的场景]（场景即Scenes文件夹下为场景文件））（直接将场景文件拖入即可）[有索引] - ┃③（然后在右侧进行设置：选苹果/Window、 选X86/X64、 剩下的默认即可） - ┃④[玩家设置] -//（在这里进行具体设置） - ┃公司名称 -// - ...
hcip网络类型实验报告
gyuguyfdsd的博客
01-01 583
HCIP
关于华为ensp一些报错处理分享及基础命令
热门推荐
所爱的博客
08-31 7万+
1.Error: Unrecognized command found at '^' position. 这里会发现在输入sys按TAb键时不会自动补全，那我们这是就应该反应过来，肯定是哪里有问题了，比如输入system-view时报错，你注意看是<>还是[]了吗，[]时输入system-view是错误的，也不会自动补全，解决方法是ctrl+z，其实他下面也有提示 后来我发现是视图的原因 eNSP有种视图模式 : 用户视图 | 系统视图 | 接口视图 ...
路由交换实验
Detective_J的博客
07-26 844
在交换机上创建相应的vlan并将其加入接口，交换机与交换机连接的接口使用Trunk，交换机与pc、路由器相连的接口使用access SW1： [Huawei]sysname SW1 [SW1] [SW1]VLAN B [SW1]VLAN batch 2 3 4 5 [SW1] [SW1]int g0/0/2 [SW1-GigabitEthernet0/0/2]port link-type trunk [SW1-GigabitEthernet0/0/2]port trunk allow-pass [SW1.
静态路由综合实验
weixin_58163202的博客
01-04 504
划分网段： 192.168.1.0/24 192.168.1.000 00000/27 ---骨干 192.168.1.000 00000/30 --192.168.1.0/30 192.168.1.000 001 00/30-- 192.168.1.4/30 192.168.1.00001000/30 --192.168.1.8/30 192.168.1.000 011 00/30- 192.168.1.12/30 192.168.1.000 100 00/30 192.168.1.16/3
静态路由实验作业
m0_60379130的博客
09-12 3347
第一步：确定网段与掩码 192.168.1.0/24 192.168.1.000.00000/27 ----骨干链路 192.168.1.000 000 00/30 --- 192.168.1.0/30 192.168.1.000 001 00/30 --- 192.168.1.4/30 192.168.1.000 010 00/30 --- 192.168.1.8/30 192.168.1.000 011 00/30 --- 192....
2021-06-09
m0_56229717的博客
06-09 627
R1 The device is running! <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname r1 [r1]interf [r1]interface g [r1]interface GigabitEthernet 0/0/0 [r1-GigabitEthernet0/0/0]ip add 12.1.1.1 24 Jun 9 2021 18:1...
ip 复习第五天 备份路由
m0_56229717的博客
07-15 831
拓扑图 路由 代码 .191.3.1 configurations have been changed. The current change number is 37, the change loop count is 0, and the maximum number of records is 4095.inter ^ Error: Unrecognized command found at '^' position. [sw1-vlan100]interf...
链路聚合理论与实验
赵忠强
08-12 985
1.链路聚合含义 2.链路聚合绑定实现条件 3.接口速率 4.端口聚合 5.二层链路聚合配置 总结 1.链路聚合含义 端口绑定技术:链路聚合（Link Aggregation)是将一组物理接口捆绑在一起作为一个逻辑接口来增加带宽的一种方法，又称为多接口负载均衡组〈Load Sharing Group）或链路聚合(Link Aggregation Group)，通过在两台设备之间建立链路聚合组，可以提供更高的通讯带宽和更高的可靠性。链路聚合不仅为设备间通信提供了冗余保护，而且不需要对硬件进行升级
IP复习静态实验
m0_56229717的博客
07-09 1248
题目要 部分代码 Please press enter to start cmd line! ## <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname r5 [r5]interf [r5]interface l [r5]interface LoopBack 0 [r5-LoopBack0]ip add 192.168.1.161 27 [r5-LoopBack0] ...
{ "pageIndex": 1, "pageSize": 20, "search": { "kssj": "2021-01-12 12:00:00", "jssj": "2021-05-12 23:49:05" } }代码编写
最新发布
11-21
string jssj = "2021-05-12 23:49:05"; var search = new { kssj = kssj, jssj = jssj }; var data = new { pageIndex = pageIndex, pageSize = pageSize, search = search }; string json = JsonConvert....
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值