力扣每日一题:402.移掉K位数字

ResNet理论基础与具体实现(详细教程) 论文地址:Deep Residual Learning for Image Recognition ​ Identity Mappings in Deep Residual Networks pytroch源码地址:resnet 0x00 前言 ResNet是2015年就提出的网络结构,中文名字叫作深度残差网络,主要作用是图像分类。现在在图像分割、目标检测等领域都有很... 阅读详情

402.移掉K位数字

https://leetcode-cn.com/problems/remove-k-digits/

难度:中等

题目:

给定一个以字符串表示的非负整数num,移除这个数中的 k 位数字,使得剩下的数字最小。

注意:

num 的长度小于 10002 且≥ k。

num 不会包含任何前导零。

示例:

示例 1 :

输入: num = "1432219", k = 3
输出: "1219"
解释: 移除掉三个数字 4, 3, 和 2 形成一个新的最小的数字 1219。
示例 2 :

输入: num = "10200", k = 1
输出: "200"
解释: 移掉首位的 1 剩下的数字为 200. 注意输出不能有任何前导零。
示例 3 :

输入: num = "10", k = 2
输出: "0"
解释: 从原数字移除所有的数字,剩余为空就是0。

分析

这道题考察我们对于单调栈的理解。

当然前提我们需要了解,既然从左往后删除,当前数如果比栈顶的数字小时,我们应该持续出栈,
直到当前数字比栈顶的数字大,再将数字入栈。

另外,当字符串的所有数字保持升序,我们一个数字都没出栈,
但由于k没有使用完,此时应该返回num[:len(num) - k]的结果。

解题:

class Solution:
    def removeKdigits(self, num, k):
        ret = []
        counts = len(num) - k
        for i in num:
            while ret and int(ret[-1]) > int(i) and  k:
                k -= 1
                ret.pop()
            ret.append(i)
        return ''.join(ret[:counts]).lstrip('0') or "0"

欢迎关注我的公众号: 清风Python,带你每日学习Python算法刷题的同时,了解更多python小知识。

我的个人博客:https://qingfengpython.cn

力扣解题合集:https://github.com/BreezePython/AlgorithmMarkdown

RK3568 MIPI屏幕启动异常:从uboot logo到黑屏的排查与修复 本文详细分析了RK3568平台MIPI屏幕在启动过程中,从uboot阶段正常显示logo到内核阶段黑屏的典型故障。通过硬件测量与软件调试,最终定位问题根源在于电源时序,并提供了在设备树中为屏幕供电的regulator节点添加`regulator-boot-on`属性的关键解决方案,有效解决了因内核启动早期电源管理导致的显示异常。 阅读详情

相关推荐

数据标注工具:AiLabel.js实现标注 超详细教程 案例分享

背景:在前端开发过程中难免遇到针对图片的缩放平移;以及在图片上进行矢量数据、文本、标注的展示;如果你有上面的任何需求,恭喜你,找到组织了.... 在此背景下,AILabel.js出生了。 前面文章我们已经介绍过AiLabel.js了; https://blog.csdn.net/u012967771/article/details/113148527 npm下载地址:https://www.npmjs.com/package/ailabel github地址:https://github.com/d.

前端互助会 9365

LeetCode力扣402题:移掉k位数字————贪心+单调栈

力扣LeetCode第402题,移掉K位数字

weixin_59459853的博客 870

AntV G6避坑指南:折叠树状图那些意想不到的BUG(附解决方案)

本文深入剖析了在React项目中使用AntV G6实现折叠树状图时,从图标错乱、数据同步到状态管理的常见BUG与解决方案。文章基于实战经验,详细解读了G6的内部机制,提供了从环境配置、自定义节点绘制到事件处理与性能优化的完整避坑指南,帮助开发者彻底解决折叠展开功能的疑难杂症。

wasm7browser的博客 257

402. 移掉 K 位数字----单调栈(java)

402. 移掉 K 位数字 难度中等605 给你一个以字符串表示的非负整数 num 和一个整数 k ,移除这个数中的 k 位数字,使得剩下的数字最小。请你以字符串形式返回这个最小的数字。 示例 1 : 输入:num = "1432219", k = 3 输出:"1219" 解释:移除掉三个数字 4, 3, 和 2 形成一个新的最小的数字 1219 。 示例 2 : 输入:num = "10200", k = 1 输出:"200" 解释:移掉首位的 1 剩下的数字为 200. 注意输出不能有任何前导零。

kzhanshen的博客 574

ICG setup timing violation介绍?

门控时钟(clock gating)在RTL级电路设计过程中进行低功耗优化常用方法,能够有效降低动态功耗(翻转功耗)。Clock gating cell 可以由与门,与非门,或门或者或非门构成,但很容易产生Glitch。在实际使用中,一般用ICG(集成门控时钟单元)来完成clock gating。 下图展示了glitch的产生原因 在CTS时钟树综合的时候,ICG不会被看作sink,通常放置在source点附近,因此就会出现如上图这种结果。上图可以看出,在分析DFF到ICG的setup timing

m0_61003348的博客 9812

(一)深入理解Bluez协议栈之蓝牙Mesh的支持(1/5)

BlueZ是Linux官方蓝牙协议栈。它是一个基于GNU General Public License (GPL)发布的开源项目,从Linux 2.4.6开始便成为Linux 内核的一部分。如果你是linux平台开发蓝牙的的工程师,肯定会接触过Bluez协议栈,hciconfig,hciattach,hciconfig等工具都是很好用的工具。

3325

LeetCode 402. 移掉K位数字 | Python

使用单调栈的思路

"大梦三千秋的博客 994

基于STM32的家庭环境监测毕业设计(全部资料)

本文设计并实现了一套基于STM32的家庭环境监测系统,具备温湿度、烟雾浓度和PM2.5检测功能,通过OLED屏实时显示数据,并能自动或手动控制风扇、加湿器等设备。系统采用分层架构设计,包含数据采集、处理、显示和控制执行模块,经测试性能稳定可靠。研究结果表明,该系统能有效提升家庭环境监测与控制的智能化水平,但仍存在传感器精度和智能化程度不足等问题,未来可进一步优化硬件配置并引入AI算法提升性能。

3254968421的博客 463

【力扣】[栈] 402.移掉K位数字

1、题目 给你一个以字符串表示的非负整数 num 和一个整数 k ,移除这个数中的 k 位数字,使得剩下的数字最小。请你以字符串形式返回这个最小的数字。 链接:https://leetcode-cn.com/problems/remove-k-digits/   2、思路分析 1)贪心+单调栈 使用vector的方式模拟栈,在拼接的时候更好用。 要使得最后得到的数字最小,一定要保持升序的状态,那么一遇到小的数字,就要将前面的数字前面出栈,出栈的次数k决定。 这里一定不要用int类型的,大概率是会越

金金金金金的博客 260

华为OD机试双机位C卷-开心消消乐(Py/Java/C/C++/Js/Go)

华为OD机试(机考)双机位C卷 【开心消消乐】,提供Java、C++、Python、Go、JavaScript源码实现,并提供完整思路讲解,以及在线OJ模拟做题。华为od机试 - 开心消消乐。

qq_45776114的博客 1514

ZY1-02D (ZY1E)多光谱数据预处理

资源一号02D卫星(5米光学卫星)于2019年9月12日成功发射,卫星搭载的两台相机,可有效获取115公里幅宽的9谱段多光谱数据以及60公里幅宽的166谱段高光谱数据,其中全色谱段分辨率可达2.5米、 多光谱为10米、高光谱优于30米,高光谱载荷可见近红外和短波红外光谱分辨率分别达到10纳米和20纳米。

热爱分享,热爱记录 4838

Leetcode 402. 移掉K位数字(贪心+栈)----python

前言: 这题真的有点难的,改了几遍之后把自己给绕晕了。。。然后花了点时间把思路捋清楚了。要考虑比较多种情况。 1. 题目描述 给定一个以字符串表示的非负整数 num,移除这个数中的 k 位数字,使得剩下的数字最小。 注意: num 的长度小于 10002 且 ≥ k。 num 不会包含任何前导零。 示例 1 : 输入: num = “1432219”, k = 3 输出: “1219” 解释: 移...

missTu~的博客 869

【2025年小红书秋招(算法岗)-9月7日-第二题(200分)- 行为权重2】(题目+思路+Java&C++&Python解析+在线测试)

题目概述 给定一个长度为$n$的行为权重数组$a$,对于每个$m$($1 \leq m \leq n$),可以通过删除最多$n-m$个元素,计算删除次数乘以代价$k$加上保留的前$m$项之和的最小值。要求对每个$m$独立求解。 核心思路 问题分解:对于每个$m$,需要找到最优的删除策略,使得总代价最小。 关键观察:最优解应保留前$p$项中的$m$个最小元素,其中$p \geq m$,删除$p-m$个元素。 算法选择:对每个前缀$p$,排序并计算前$m$项的最小和,更新所有相关$m$的答案。 解决步骤 枚举前

m0_73659489的博客 157

LeetCode 每日一题402:移掉K位数字

402.移掉K位数字 给定一个以字符串表示的非负整数 num,移除这个数中的 k 位数字,使得剩下的数字最小。 注意: num 的长度小于 10002 且 ≥ k。 num 不会包含任何前导零。 示例 1 : 输入: num = "1432219", k = 3 输出: "1219" 解释: 移除掉三个数字 4, 3, 和 2 形成一个新的最小的数字 1219。 示例 2 : 输入: num = "10200", k = 1 输出: "200" 解释: 移掉首位的 1 剩下的数字为 200. 注意输出

雷震子的博客 336

温度PID控制PLC程序

温度PID稳定控制程序,适用于欧姆龙PLC,对其他PLC也具有很大参考价值

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

每日一题:Leetcode-402 移掉K位数字

力扣题目解题思路java代码。

LIUCHANGSHUO的博客 522

VC中sqlite的使用

在VC中对sqlite的使用,实现数据库大批数据的快速插入,读取数据库中的数据在ListCtrl中显示

Leetcode每日一题2020.11.15第402题:移掉K位数字

402.移掉K位数字 题目描述 思路、算法及代码实现 贪心+单调栈: 对于两个相同长度的数字序列,最左边不同的数字决定了这两个数字的大小,例如,对于A=1axxx,B=1bxxx,如果a>b则A>B。 基于此,我们可以知道,若要使得剩下的数字最小,需要保证靠前的数字尽可能小。 基于上述分析,我们可以得出“删除一个数字”的贪心策略: 给定一个长度为n的数字序列[D0D1D2D3…Dn-1],从左往右找到第一个位置i(i>0)使得Di<Di-1,并删去Di-1;如果不存在,说明整个数

m0_51210480的博客 238

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

Leetcode每日一题:402.remove-k-digits(移掉k位数字)

思路:我们只需从左向右扫描k次,每一次都扫描到递增序列的峰值,再把它删除,最后留下的便是最小值; string removeKdigits(string num, int k) { int len = num.size(); if (len == k) return "0"; for (int i = 0; i < k; i++) { //要删除的元素下标del int del = 0; //从左向右.

CodeLuweir 的博客 324

【LeetCode每日一题】单调栈 402 移掉k位数字

单调栈的使用案例,通过数学推理方式理解用法

qq_43720551的博客 1040

【LeetCode每日一题】[中等]402. 移掉K位数字

【LeetCode每日一题】[中等]402. 移掉K位数字 402. 移掉K位数字 402. 移掉K位数字 算法思想:数组 题目: 思路: link java代码 class Solution { public String removeKdigits(String num, int k) { //如果长度==k,即全部删除,直接返回0; if (num.length() == k) { return "0"; } int n = num.length()

qq_39457586的博客 154

<LeetCode每日一题>402移掉K位数字

题目描述 给定一个以字符串表示的非负整数 num,移除这个数中的 k 位数字,使得剩下的数字最小。 注意: ●num 的长度小于 10002 且 ≥ k。 ●num 不会包含任何前导零。 示例1: 输入 num = “1432219” k=3 输出 “1219” 解释: 移除掉三个数字 4, 3, 和 2 形成一个新的最小的数字 1219。 示例2: 输入 num = “10200” k=1 输出 “200” 解释: 移

qq_43664466的博客 248

Leetcode 每日一题——402. 移掉K位数字

402. 移掉K位数字 给定一个以字符串表示的非负整数 num,移除这个数中的 k 位数字,使得剩下的数字最小。 注意: num 的长度小于 10002 且 ≥ k。 num 不会包含任何前导零。 可以看出来这道题是要使用栈的数据结构处理的,但是感觉还是没怎么写好,C++的代码如下(感觉写得很啰嗦): class Solution { public: string removeKdigits(string num, int k) { vector<int> IntN

qq_41978896的博客 224

leetcode【每日一题】402. 移掉K位数字 Java

题干 给定一个以字符串表示的非负整数 num,移除这个数中的 k 位数字,使得剩下的数字最小。 注意: num 的长度小于 10002 且 ≥ k。 num 不会包含任何前导零。 示例 1 : 输入: num = “1432219”, k = 3 输出: “1219” 解释: 移除掉三个数字 4, 3, 和 2 形成一个新的最小的数字 1219。 示例 2 : 输入: num = “10200”, k = 1 输出: “200” 解释: 移掉首位的 1 剩下的数字为 200. 注意输出不能有任何前导零。 示

qq_43491066的博客 289

【LeetCode每日一题】——402.移掉 K 位数字

给你一个以字符串表示的非负整数 num 和一个整数 k ,移除这个数中的 k 位数字,使得剩下的数字最小。请你以字符串形式返回这个最小的数字。

IronmanJay 339

每日练习——leetcode402. 移掉 K 位数字和17. 电话号码的字母组合

402. 移掉 K 位数字 17. 电话号码的字母组合

2401_83138160的博客 1092

[算法练习及思路-leetcode每日一题(Java解法)]No402.移掉K位数字

题号:no402 题目名:移掉K位数字 原题URL:https://leetcode-cn.com/problems/remove-k-digits/ 题目描述 给定一个以字符串表示的非负整数 num,移除这个数中的 k 位数字,使得剩下的数字最小。 注意: num 的长度小于 10002 且 ≥ k。 num 不会包含任何前导零。 示例 示例 1: 输入: num = "1432219", k = 3 输出: "1219" 解释: 移除掉三个数字 4, 3, 和 2 形成一个新的最小的数字 1219。

叶落雨飘的博客 262

【LeetCode】 402. Remove K Digits 移掉K位数字(Medium)(JAVA)

【LeetCode】 402. Remove K Digits 移掉K位数字(Medium)(JAVA) 题目地址: https://leetcode.com/problems/remove-k-digits/ 题目描述: Given a non-negative integer num represented as a string, remove k digits from the number so that the new number is the smallest possible. Note:

qq_16927853的博客 127
上一篇: 力扣每日一题:回溯解法 全排列I & II
下一篇: 力扣每日一题:5738. K进制表示下的各位数字总和
清风Python
博客等级 码龄7年 406粉丝 267原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值