鸿蒙5.0开发进阶:JS组件-svg组件(animate)

鸿蒙开源项目图形图像教程—如何实现svg格式图片的解析和渲染功能 实现svg格式图片的解析和渲染功能;支持更多的svg element和css样式;【OpenHarmony多媒体技术、Stage模型、ArkUI多端部署、分布式应用开发、音频、视频、WebGL、Napi组件、OpenHarmony内核、Harmony南向开发、鸿蒙项目实战】等技术知识点。鸿蒙Next全套VIP学习资料←点击领取!(安全链接,放心点击。 阅读详情

往期鸿蒙5.0全套实战文章必看:(文中附带全栈鸿蒙5.0学习资料)


animate

说明

该组件从API version 7开始支持。后续版本如有新增内容,则采用上角标单独标记该内容的起始版本。

设置svg组件的属性动画。

权限列表

无

子组件

不支持。

属性

名称类型默认值必填描述
idstring-否组件的唯一标识。
attributeNamestring-否设置需要进行动效的属性名。
begin<time>0否

设置动效的延迟时间。

支持输入ms(毫秒)、s(秒)、m(分),默认为s(秒),其他格式不支持

dur<time>0否

设置动效持续时间,如果dur没设置,按照end-begin的结果作为持续时间,小于等于0时,动效不触发。

支持输入ms(毫秒)、s(秒)、m(分),默认为s(秒),其他格式不支持

end<time>0否设置动效多久时间后结束。支持输入ms(毫秒)、s(秒)、m(分),默认为s(秒),其他格式不支持
repeatCount<number | indefinite>1否设置动画播放的次数,默认无限次播放(indefinite),可通过设置为数值1仅播放一次。
fill<freeze | remove>remove否设置动画结束时的状态。
calcMode<discrete | linear | paced | spline>linear否

设置动画的插值模式。

discrete:阶跃,from值直接跳转到to的值;

linear:线性;

paced:线性,设置此项后keyTimes和keyPoints值无效

spline:自定义贝塞尔曲线,spline点定义在keyTimes属性中,每个时间间隔控制点由keySplines定义

keyTimesstring-否设置关键帧动画的开始时间,值为0~1之间的数值用分号隔开,比如0;0.3;0.8;1。keyTimes、keySplines、values组合设置关键帧动画。keyTimes和values的个数保持一致。keySplines个数为keyTimes个数减一
keySplinesstring-否与keyTimes相关联的一组贝塞尔控制点。定义每个关键帧的贝塞尔曲线,曲线之间用分号隔开。曲线内的两个控制掉格式为x1 y1 x2 y2。比如0.5 0 0.5 1; 0.5 0 0.5 1;0.5 0 0.5 1
bynumber-否在动画中对某一指定属性,添加相对偏移值,from默认为原属性值。
fromstring-否

设置需要进行动画的属性的开始值。

如果已经设置了values属性,则from失效。

tostring-否

设置需要进行动画的属性的结束值。

如果已经设置了values属性,则to都失效。

valuesstring-否设置一组动画的变化值。格式为value1;value2;value3。

示例

<!-- xxx.hml -->
<div class="container">
  <svg width="400" height="400">
    <rect x="20" y="20" width="100" height="100" fill="red" rx="0" ry="20">
      <animate attributeName="rx" values="0;10;30;0" keyTimes="0;0.25;0.75;1" keySplines="0.5 0 0.5 1; 0.5 0 0.5 1; 0.5 0 0.5 1" dur="1000" repeatCount="indefinite">
      </animate>
    </rect>
  </svg>
</div>

<!-- xxx.hml -->
<div class="container">
  <svg width="400" height="400">
    <rect x="20" y="20" width="100" height="100" fill="red" rx="0" ry="20">
      <animate attributeName="fill" from="red" to="blue" dur="1000" repeatCount="indefinite"></animate>
      <animate attributeName="height" from="50" to="150" begin="500" end="1000" repeatCount="indefinite">  </animate>
    </rect>
  </svg>
</div>

<!-- xxx.hml -->
<div class="container">
  <svg width="400" height="400">
    <rect x="20" y="20" width="100" height="100" fill="red" rx="0" ry="20">
      <animate attributeName="rx" values="0;30" dur="1000" repeatCount="indefinite" fill="freeze" calcMode="linear"></animate>
    </rect>
  </svg>
</div>

<!-- xxx.hml -->
<div class="container">
  <svg fill="white" width="600" height="600">
    <circle cx="60" cy="70" r="50" stroke-width="4" fill="white" stroke="blue">
      <animate attributeName="r" from="0" to="50" dur="2000" repeatCount="indefinite"></animate>
      <animate attributeName="cx" from="60" to="200" dur="2000" repeatCount="indefinite"></animate>
    </circle>
    <circle cx="60" cy="200" r="50" stroke-width="4" fill="white" stroke="blue">
      <animate attributeName="stroke-width" from="4" to="10" calcMode="discrete" dur="2000" repeatCount="indefinite"></animate>
      <animate attributeName="stroke" values="red;blue" dur="2000" repeatCount="indefinite"></animate>
    </circle>
    <circle cx="180" cy="200" r="50" stroke-width="10" stroke="red" stroke-dasharray="60 10" stroke-dashoffset="3">
      <animate attributeName="stroke-opacity" from="1.0" to="0.5" dur="2000" repeatCount="indefinite"></animate>
      <animate attributeName="stroke-dashoffset" values="30;0;30" dur="500" repeatCount="indefinite"></animate>
     <animate attributeName="cx" from="180" to="400" dur="2000" repeatCount="indefinite"></animate>
    </circle>
    <circle cx="180" cy="200" r="5" fill="blue">
      <animate attributeName="cx" from="180" to="400" dur="2000" repeatCount="indefinite"></animate>
    </circle>
    <circle cx="60" cy="380" r="50"  fill="blue">
      <animate attributeName="fill" values="red;blue" dur="2000" repeatCount="indefinite"></animate>
    </circle>
    <circle cx="180" cy="380" r="50"  fill="blue">
      <animate attributeName="fill-opacity" from="1.0" to="0.5" dur="2000" repeatCount="indefinite"></animate>
    </circle>
    </svg>
</div>

鸿蒙OpenHarmony【animate】svg组件 设置svg组件的属性动画。 阅读详情

相关推荐

鸿蒙5.0版开发:UI框架JS组件-svg组件(animate)

设置svg组件的属性动画。

m0_69424697的博客 1145

14-鸿蒙开发中的SVG图标:全面指南

SVG图标是一种基于XML的矢量图形格式,可以在不损失质量的情况下任意缩放。无损缩放:SVG图标可以任意放大或缩小,而不会失真。文件体积小:相比位图格式(如PNG、JPEG),SVG文件体积更小。可编辑:SVG图标可以用文本编辑器打开和编辑,方便修改和定制。兼容性好:现代浏览器和大多数开发平台都支持SVG图标。通过本文,你已经学会了如何在鸿蒙开发中使用SVG图标,包括直接嵌入SVG代码、使用SVG文件、动态加载SVG图标,以及设置样式和添加动画。

LCFliu的博客 2727

鸿蒙5.0版开发:UI框架JS组件-svg组件(path)

绘制路径。

m0_69424697的博客 371

鸿蒙 加载svg文件

1.将SVG文件转换为XML文件 选择New>Svg To Xml 转换成功后,可以在resources > base > graphic文件下找到转换后的xml文件,并在布局文件中,引用该xml文件名即可完成对图标文件的引用。 <Image ohos:height="120vp" ohos:width="match_parent" ohos:background_element="$graphic:svg_test" ohos:scale_mo

cmmboy1990的博客 1579

鸿蒙5.0版开发:UI框架JS组件-svg组件(rect)

用于绘制矩形、圆角矩形。

m0_69424697的博客 368

鸿蒙5.0版开发:UI框架JS组件-svg组件(ellipse)

椭圆形状。

m0_69424697的博客 368

【鸿蒙next开发】JS组件:svg组件(animate)

本文详细介绍了HarmonyOS Next中SVG组件的动画实现方法,包含animate组件的核心属性和配置参数。

m0_73088370的博客 960

HarmonyOS鸿蒙开发指南:组件开发 svg详细介绍

line x1="180" x2="280" y1="500" y2="500" stroke-width="4" fill="white" stroke="black"> //窗框。 //窗框。M/m = moveto 参数x和y表示需要移动到点的x轴和y轴的坐标。

斌擎科技 1613

鸿蒙5.0开发进阶:JS组件-svg组件(rect)

用于绘制矩形、圆角矩形。

Androidbye的博客 399

matplotlib三维画图之观察博弈论混合策略下纳什均衡点

参考链接: 博弈论入门20讲之第16讲-猜谜游戏-散户如何赢庄家 游戏背景: 我的期望是: 你的期望是: 使用Python的matplotlib画图: import numpy as np import matplotlib.pyplot as plt from mpl_toolkits.mplot3d import Axes3D fig = plt.figure() ax = Axes3D(fig) X = np.linspace(0, 1, 100) Y = np.linspace(0, 1,

敲代码的小风 1260

<视觉>——单目相机的标定(简单原理+Opencv实现)

单目相机的标定原理大致如下: 世界坐标到像素坐标的转换。 期间的参数有S尺度因子,内参矩阵K,旋转矩阵R,平移矩阵T,一共八个未知数。 在Opencv中我们可以方便的根据相机拍摄不同位姿的标定板图片来标定相机,从而求得这些参数,从而可以将相机下的坐标和实际的世界坐标联系起来,求取单应性矩阵H 参考: 单目相机综述:写的特别好 https://www.cnblo...

Kano365的博客 1万+

鸿蒙5.0开发进阶:JS组件-svg组件(line)

绘制线条。

Androidbye的博客 331

Fluent温度超限调试:从能量方程到网格优化的实战指南

本文深入解析Fluent中温度超限问题的诊断与解决方法,从能量方程机制到网格优化策略,提供实战指南。通过分析温度与焓的换算关系,探讨典型场景如能量方程发散、局部网格质量差等,并给出五步调试法及高级命令应用,帮助工程师有效解决温度计算异常问题。

weixin_29045585的博客 531

鸿蒙5.0开发进阶:JS组件-svg组件(path)

绘制路径。

Androidbye的博客 282

最新Mamba环境配置教程:从CUDA到causal-conv1d的完整安装流程

本文提供最新Mamba环境配置教程,涵盖从CUDA到causal-conv1d的完整安装流程。针对深度学习领域的长序列处理需求,详细指导如何正确配置CUDA工具链、安装PyTorch及关键依赖causal-conv1d,解决常见报错问题,并验证mamba-ssm集成效果。

bush的博客 418

深入解析高通SA8775芯片:性能、架构与研发创新趋势

SA8775芯片凭借其强大的CPU、GPU和AI加速能力,能够应对现代智能系统中的复杂计算任务。它不仅适合高性能计算、深度学习应用,也在汽车、智能设备等领域有广泛的应用前景。无论是在自动驾驶系统中,还是在车载信息娱乐和高级嵌入式系统中,SA8775都展现了其出色的计算能力和能效平衡,是现代智能系统的重要硬件基础。SA8775芯片作为高通的高性能处理平台,具有出色的计算和AI加速能力,但也存在一些值得关注的地方。

weixin_43199439的博客 9351

鸿蒙5.0开发进阶:JS组件-svg组件(circle)

圆形形状。

Androidbye的博客 393

解决anaconda占用C盘空间过多问题

anaconda就算安装在其他盘,默认会把索引、锁定文件、压缩包等都放到系统盘(C盘),我用了两年,占用30GB。 1. 卸载不用的虚拟环境 查看已安装的虚拟环境 conda env list 卸载不用的、过期的虚拟环境 conda remove -n (要卸载的环境的名字) --all 2. 删除索引缓存、锁定文件、未使用过的包和tar包 conda clean -a 清理完之后,删除了15GB,还剩15GB,舒服了 ...

沉迷单车的追风少年 3万+

鸿蒙5.0开发进阶:JS组件-svg组件(ellipse)

椭圆形状。

Androidbye的博客 265

别再无脑调打码平台了!聊聊 ddddocr 在爬虫验证码识别中的真实边界

ddddocr是国产开源社区的优秀成果,它大幅降低了验证码识别的入门门槛。工具的自由不等于工程的自由。真正的能力不在于“会不会调库”,而在于能否准确判断工具的适用边界、构建鲁棒的容错机制、并在成本与效果之间做出理性权衡。下次当你准备在爬虫中加入验证码识别时,不妨先问自己:这个站点的验证码类型是否在ddddocr的能力圈内?我的预处理是否针对该站点做过专项调试?我的失败重试和监控机制是否完备?如果三个问题都能肯定回答,那么ddddocr就是你的利器;如果有任何一个犹豫,请先补齐短板再上路。评论区交流:你用。

专注于Python爬虫开发,分享爬虫技巧、项目实战与反爬经验,使用Scrapy、BeautifulSoup等工具,解决数据抓取难题。 1285

基于STM32、HAL库的ICP-20100气压传感器 驱动程序设计

它具有低功耗、高精度、快速响应等特点,非常适合物联网、可穿戴设备和无人机等应用。#define ICP20100_FIFO_CTRL 0x09 // FIFO控制寄存器。#define ICP20100_FIFO_DATA 0x0A // FIFO数据寄存器。#define ICP20100_FIFO_STS 0x0B // FIFO状态寄存器。#define ICP20100_FIFO_WTM 0x15 // FIFO水印设置。

corlin6688的博客 601

鸿蒙5.0开发进阶:JS组件-svg组件(polyline)

绘制折线。

Androidbye的博客 316

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

鸿蒙5.0开发进阶:JS组件-svg组件(polygon)

绘制多边形。

Androidbye的博客 300

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

大中型超市收银系统(可直接运行)

光步前台收银系统系统功能:商品销售、商品退货、挂单、收银员权限、会员销售、单品取消、整单取消、商品查询、脱机销售、脱机数据上传,基本资料下载,开钱箱、小票打印、收款结算,支持多币种付款方式(现金、储值卡、礼券、微信等),支持多种促销。运行环境:.net 4.0登陆信息用户名:1001 密码:123456内置商品信息,商品编码可输入00001000 - 00010000,测试效果相关功能键F5 结算 F9挂单 F11商品查询 F8退货 Insert单品取消 Del整单取消 F12开钱箱F2 会员 Ctrl+Z退出系统 Home 锁屏 相关源码待公开

鸿蒙API14开发【SVG组件animate】JS组件

本文介绍了SVG动画组件(从API 7开始支持)的功能与属性配置方法。该组件不支持子组件,但可通过丰富的属性定义动画效果,包括: 基础设置(id、attributeName) 时间控制(begin/dur/end延迟、持续和结束时间) 播放配置(repeatCount循环次数、fill结束状态) 动画模式(calcMode插值模式) 关键帧控制(keyTimes/keySplines/values) 值变化(by/from/to) 示例展示了三种典型用法: 矩形圆角动画(通过关键帧实现rx属性变化) 颜色渐

bbq的博客 289

霍尼韦尔SoftMaster使用说明

霍尼韦尔SoftMaster使用说明

【鸿蒙next开发】JS组件:svg组件(rect)

本文介绍了鸿蒙HarmonyOS开发中绘制矩形组件rect的使用方法。

m0_73088370的博客 296

鸿蒙5.0开发进阶:JS组件-svg组件(animateMotion)

路径动效。

Androidbye的博客 396
上一篇: 鸿蒙5.0开发进阶:JS组件-svg组件(textPath)
下一篇: 鸿蒙5.0开发进阶:JS组件-svg组件(animateMotion)
懂你的大海
博客等级 码龄6年 9049粉丝 1381原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值