List容器中的byte[]

(13)C#里使用比较难理解的IList<ArraySegment<byte>>类型 经常做网络开发,需要接收网络的数据,由于TCP的数据是一段一段地接收到的,那么需要把这些数据放到缓冲区,然后又需要把这些数据合并起来使用。 因此就会使用IList<ArraySegment<byte>>类型,使用ArraySegment<byte>来保存收到的一段数据,然后使用List来保存所有分段的数据。 初学C#的人,使用这个类型,往往比较难理解,所以需要通过例子来练习它。 比如怎么样从IList<ArraySegment<byte>>类型. 阅读详情
byte[] 在程序中是一个引用,如果放在循环外面,则List里面所有的元素都是引用的同一个对象
如果修改某个元素,其他的元素也会跟着改变

如果不希望出现这种效果,在初始化时应该将byte[]的声明放在循环里面

public static void main(String[] args) {
	List<byte[]> elementListPre = new ArrayList<byte[]>();
	
	// 初始化elementList数据
	for (int i = 0; i <= 15; i ++) {
		if ( i == 15 ) {
			elementListPre.add(i, null);
		} else {
			// 将byte[]放在里面,修改的时候才不会出现一个改全部变的情况
			byte[] byt = new byte[1024];
			elementListPre.add(i, byt);
		}
	}
	
}


 

Java经典面试题总结(附答案)(一) ② List特点:元素有放入顺序,元素可重复 ,Set特点:元素无放入顺序,元素不可重复,重复元素会覆盖掉,(元素虽然无放入顺序,但是元素在set中的位置是有该元素的HashCode决定的,其位置其实是固定的,加入Set 的Object必须定义equals()方法 ,另外list支持for循环,也就是通过下标来遍历,也可以用迭代器,但是set只能用迭代,因为他无序,无法用下标来取得想要的值。List:和数组类似,List可以动态增长,查找元素效率高,插入删除元素效率低,因为会引起其他元素位置改变。 阅读详情

相关推荐

CANOE DIVA 工程怎样在具体服务前增加前置条件

然后会在CANoe的Test Module视窗中发现一个跟系统条件相关的Test Module模块,在该模块中有生成跟系统条件相关的CAPL 脚本。这里需要根据你的实际项目进行更改,diva工程加载到canoe的工程的时候,会同步加入你创建的cdd文件,这里示例的ABS_ESP 就是你的cdd的ECU命名,后面就是具体的前置条件服务。4、配置完成后,测试用例就会如下图Trace窗口所示,在每一次10 02请求之前都会调用CAPL Function的PreconditionCheck函数中定义的脚本。

weixin_45940007的博客 1975

list<byte[]> 转换成byte[]

weixin_43244841的博客 2413

两层板如何做阻抗控制呢

两层板如何做阻抗控制呢? 这个问题可能很多人都会碰到,有的人在此等需要做阻抗控制的情况都选择做多层板。诚然,多层板在阻抗控制,EMC等等方面都有着天然的优势。然而,在价格上和周期上,两层板就有着绝对优势了。 对于成本非常敏感而又不是太复杂的产品,尽管对于我们硬件工程师而言,有一堆的理由要求使用多层板。然而在面对毛都不懂的老板“别人能做,你为什么不能做?”这个问题时只得低下我们高傲的头颅。 好...

weixin_42005993的博客 2万+

C#.网络编程 Socket基础(十) List<byte>队列缓存Socket接收的数据:List<byte>插入byte[]数组;反之List<byte>可拷贝到byte[]数组

一、简介 缓存Socket发送的数据,放到队列中,然后固定地从队列总读取字节。 关键点1:List&lt;byte&gt;列表 List&lt;byte&gt; VideoList = new List&lt;byte&gt;(); List数组可以实现快速地增删。如果用byte[]VideoList = new byte[1000],来缓存,那么久需要进行移位等等操作,增加...

xpj8888的博客 2823

为什么你的SiC MOSFET仿真不准?可能是离子注入的‘沟道效应’在捣鬼(Silvaco BCA模块详解)

本文深入分析了SiC MOSFET仿真中离子注入沟道效应的关键影响,揭示了Silvaco BCA模块在模拟SiC晶向和角度参数时的核心设置要点。通过详细解析晶圆偏切与注入角度的等效关系,提供优化MOSFET沟道区注入仿真的五步实战方法,帮助工程师将阈值电压仿真误差从26%降低到5%以内。

weixin_26789847的博客 410

Stateflow使用C语言结构体,关于使用Stateflow调用外部C代码的教程介绍

无论是Simulink仿真,还是对模型做代码生成,已有C代码的调用都是我们经常会遇到的情形:如何调用现有的外部C代码?很多人首先想到的是S-Function。的确,S-Function提供了一种途径,可以让我们把C函数封装成Simulink模块在Simulink环境下运行。另外还有一种方式,叫做Legacy Code Tool,说白了也是S-Function,只是MATLAB提供了这样的接口便于用...

weixin_34947914的博客 2674

Java - List<Byte> 转 byte[ ]

一般在网络、文件中,经常用到 byte[] 数组,但这次小编遇到一个互转的问题,发现原生 JDK 自带的方法贼麻烦,于是想到了 Guava 神器。 1、使用 for 循环 private byte[] listTobyte(List<Byte> list) { if (list == null || list.size() < 0) ret...

1万+

【论文笔记】Beyond Low-frequency Information in Graph Convolutional Networks

文章目录1. Abstract2. Introduction低频和高频信号作用FAGCN怎么设计3. An Experimental Investigation4. Model4.1 filter定义4.2 Aggregation4.3 Problems of signal combination4.4 Spatial vision of FAGCN4.5 系数αijG\alpha_{i j}^{G}αijG​4.6 模型整体框架FAGCN的表达能力实验 本文发表在AAAI-21上 论文地址:https:

Running Snail 5605

Java byte[]与List转换工具 | Java工具类

其实这个工具是给自己写的,因为自己老是忘记。所以记录一下。

阿良的博客 5500

Vivaldi天线HFSS建模实战:从参数化曲线到辐射优化的完整流程

本文详细介绍了Vivaldi天线在HFSS中的建模与优化全流程,涵盖参数化曲线绘制、馈电系统设计及性能验证等关键步骤。通过实战案例分享,帮助工程师掌握超宽带天线的HFSS建模技巧,提升雷达探测和通信系统设计效率。重点解析了指数渐变曲线建模、微带馈电优化等核心技术要点。

weixin_29228781的博客 277

ST-LINK调试STM32H743必看:CubeMX工程中缺失的这行代码导致程序跑飞

本文深入剖析了使用ST-LINK调试STM32H743时,因CubeMX工程中缺失电源电压档位配置代码而导致程序跑飞或出现“Can not access memory”错误的问题。文章解释了H7系列电源与时钟耦合的核心原理,提供了具体的代码修复方案和系统化的调试排查思路,帮助开发者从根本上解决这一常见调试困境。

weixin_29191669的博客 282

Integer BigInteger Collection List

byte 变量取值范围 -128到127(-27~27-1)int int 变量取值范围 -32768~32767 https://www.cnblogs.com/yinzhengjie/p/8878866.html

qq_44651051的博客 197

YOLOv8【第七章:损失函数篇·第1节】一文搞定,IoU系列损失函数!

🏆 本文收录于 《YOLOv8实战:从入门到深度优化》 专栏。该专栏系统复现并梳理全网各类 YOLOv8 改进与实战案例(当前已覆盖分类 / 检测 / 分割 / 追踪 / 关键点 / OBB 检测等方向),坚持持续更新 + 深度解析,质量分长期稳定在 97 分以上,可视为当前市面上 覆盖较全、更新较快、实战导向极强 的 YOLO 改进系列内容之一。

**My Coding Family** 1203

Thrift 应用

Thrift最初由facebook研发,主要用于各个服务之间的RPC通信,支持跨语言。 Thrift是一个典型的CS结构,客户端和服务端可以使用不同的语言开发,所以需要有一种中间语言来关联客户端和服务端的语言。 这种语言就是IDL(接口描述语言) RPC通信框架如果支持多个语言,那么他支持的数据类型一般是这些编程语言数据类型的交集,保证最大的共同支持。 Thrift数据类型 1. byt...

小黄宝宝的专栏 196

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

android 蓝牙通讯demo

android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。

数据结构-数据容器以及泛型栈和泛型队列

/无符号//byte ushort uint ulong//有符号//sbyte short int long//浮点数//float double decimal//特殊。

weixin_53163894的博客 298

pscad IEEE标准系统搭建说明

pscad IEEE标准系统搭建说明,包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。

Java杂记

 char、byte或short类型的数值进行移位处理,那么在移位进行前,它们会被转换成int类型,并得到的结果也是int型   (窄化转换、扩展转换)   int型的0的非:~0等于-1 (int型的0的2进制是32个0,~0的二进制就是32个1,故为-1)   Java没有sizeof,C/C++中用于获得数据项分配的字节数,主要为了“移植”,因为不用的数据类型在不同的机器上可能有不...

懒人0zz 189

怀旧版电脑GBC模拟器

再现原版GBC掌机的界面,电脑运行连游戏界面都一样大小,很怀旧,很真实,(英文版)强烈推荐,很小的文件,很难才找到的。

thrift学习-idl

thrift-idl 1.基本类型 bool:布尔值(true or false),一个字节 byte:有符号字节 i16:16位有符号整型 i32:32位有符号整型 i64:64位有符号整型 double:64位浮点型 string:encoding agnostic text or binary string thrift不支持无符号整型 2.特殊类型 binary:Blob(byte ...

qq_25392761的博客 1092

Thrift数据类型

thrift需要使用对应语法编写接口用于生成对应语言的接口,本文简单介绍会用到的数据类型 基础类型 bool/byte/i16/i32/i64/double/string 其中没有无符号整型类型。 containers 集合类 list/set/map structs 自定义将多个字段封装起来的数据类型,每个字段有一个整形标志位,类型,字段名和可选的默认值 struct Obj { 1: i3...

weixin_34403693的博客 184

thrift数据类型

2019独角兽企业重金招聘Python工程师标准>>> ...

weixin_33795806的博客 578

redis获取byte数组_《Redis深度历险》读书笔记

list/set/hash/zset 这四种数据结构是容器型数据结构:1、create if not exists2、drop if no elements阻塞读在队列没有数据的时候,会立即进入休眠状态,一旦数据到来,则立刻醒过来。消息的延迟几乎为零。用 blpop/brpop 替代前面的 lpop/rpop位图不是特殊的数据结构,它的内容其实就是普通的字符串,也就是 byte 数组。我们 可以使...

weixin_35510737的博客 187

Thrift(二)——数据类型

Thrift采用IDL(Interface Description Language/接口描述语言)来定义Thrift类型,然后由Thrift代码生成器生成开发人员所需要的目标语言代码文件。Thrift数据类型包含以下基本数据类型、结构体、容器、枚举等。 基本数据类型 基本数据类型简单明了,包含了所有编程语言中的可用基本数据类型。 bool:布尔值(true/false) byte:8...

行走。 4381

Thrift IDL基本语法

文章目录thrift原理IDL基本类型object类型struct 结构体Container (容器)enum (枚举)常量类型ExceptionService (服务定义类型)Namespace (名字空间)Comment (注释) thrift原理 https://www.jianshu.com/p/f12a442d510c IDL Thrift 采用IDL(Interface Definition Language)来定义通用的服务接口,然后通过Thrift提供的编译器,可以将服务接口编译成不同语言编

weixin_38370441的博客 1232

oneway thrift php,Thrift RPC 系列教程(1)——Thrift语言

Thrift不是严格意义上的编程语言,但是却胜过很多编程语言,充满了美感。基础数据类型Thrift 这门编程语言提供了如下几种基础的数据类型:bool: A boolean value (true or false)byte: An 8-bit signed integeri16: A 16-bit signed integeri32: A 32-bit signed integeri64: A ...

weixin_42470145的博客 197

Python数据容器实战指南:List、Tuple、String核心原理与性能优化

在Python编程中,数据容器是组织和存储数据的基础结构,理解其底层原理对于编写高效、健壮的代码至关重要。从概念上讲,数据容器如列表、元组和字符串,本质上是管理数据序列的不同实现方式,它们在内存布局、可变性和操作性能上各有特点。列表作为可变序列,支持动态增删,但需警惕其浅拷贝陷阱和O(n)操作的开销;元组的不可变性提供了数据安全和哈希能力,使其成为字典键的理想选择;字符串作为不可变字符序列,其高效的切片和连接操作依赖于新对象的创建。这些容器的技术价值在于,开发者可根据数据是否需要修改、顺序是否重要、是否需作

weixin_30919571的博客 393
上一篇: Eclipse插件集合
下一篇: Java跳出循环的区别
Android_Robot
博客等级 码龄15年 62粉丝 88原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值