【嵌入式软件工程师常用工具分享】串口监控工具

AI摘要

本文介绍了CEIWEI CommMonitor,一个强大的串行端口监控软件,适用于RS232/RS422/RS485端口监控。该工具能记录和分析串口活动,提供数据过滤、搜索、导出等功能,适用于串口设备测试和问题排查。支持多种Windows系统版本和Unicode,语言支持包括简体中文、繁体中文和英文。使用方法包括先打开串口监控精灵,再开启串口调试工具。

1. 串口监控精灵


“CEIWEI CommMonitor 串行端口监控精灵是用于 RS232 / RS422 / RS485 端口监控的专业强大的系统实用程序软件。CEIWEI CommMonitor 监控显示,记录和分析系统中的所有串行端口活动。这是追踪应用程序或驱动程序开发,串行设备测试和优化等过程中可能出现的问题的理想方法。还提供过滤、搜索、数据导出和强大的数据拦截功能,可以将指定端口的数据流、控制流信息拦截并保存下来,供分析之用。如察看端口状态的变化(波特率、数据位、校验位、停止位),拦截上行、下行的数据,处理速度快,拦截效率高,并可以以十六进制、ASCII 字符形式显示,全面支持 Unicode 。

支持 Windows 系统版本:WinXP、Win2003、WinVista、Win7、Win2008、Win8、Win2012、Win2016、Win10,32/64 位系统,驱动程序已签名,完全支持 64 位 Windows 系统。

语言支持:简体中文、繁体中文、英文。”

在帮助栏中有详细的使用说明,感兴趣的小伙伴可以好好研究一下!感谢软件作者。
在这里插入图片描述


2. 使用方法


step1

各种常用串口工具下载及简易操作使用 或附件打包下载软件打开界面如下,新建会话,连接类别中,输入会话窗口名称,选择协议,如果是选择SSH,需要对应填写主机IP和端口号用户身份验证类,可输入用户名和密码,用于记住登录用户名和密码,避免每次登录重复输串口需要在设置中选择正确的端口号和波特率,以及如下其他设置日志记录中,可以选择文件路径进行日志存储,需要勾选连接时开始日志记录,同时可以在时间戳那里勾选写入日志文件,根据最下面的格式,在格式(M):栏中输入需要写入时间戳的格式或者也可以在连接端口后,再邮件选择日志→启动,再行启动日志记录。 阅读详情

相关推荐

串口调试工具全解析:从基础原理到实战选型与避坑指南

串口通信是嵌入式系统、物联网设备和工业控制中实现数据交换的基础技术,其核心原理是通过异步串行接口进行字节级的可靠传输。在工程实践中,高效的串口调试工具能极大提升开发与问题排查效率,它们通过提供稳定的连接管理、灵活的数据收发、强大的日志记录与协议解析功能,成为软硬件联调不可或缺的环节。针对不同的应用场景,工具选型至关重要:轻量级需求可选用Putty或Tera Term进行快速基础通信;复杂多协议调试可借助SecureCRT或MobaXterm的统一管理能力;而深度协议分析、数据监视及可视化则需依赖Access

weixin_30606461的博客 327

嵌入式软件与硬件怎么选?工作内容、薪资、学习路线全解析

嵌入式系统开发涉及软件与硬件协同,核心在于理解底层原理与工程实践。嵌入式软件侧重驱动、系统与应用开发,嵌入式硬件聚焦电路设计、PCB与调试。两者在市场需求、薪资结构和成长路径上各有特点,技能重叠区逐渐扩大。掌握C语言、RTOS、Linux或电路分析、信号完整性等关键技术,能提升在消费电子、工业控制、汽车电子等领域的竞争力。本文深入对比嵌软与嵌硬的工作内容、薪资差异、学习路线及项目实战,助你做出明智选择。

weixin_33827731的博客 372

【 调试助手 】CEIWEI CommMonitor 串口监控工具

CEIWEI CommMonitor 串行端口监控精灵是用于 RS232 / RS422 / RS485 端口监控的专业强大的系统实用程序软件。CEIWEI CommMonitor 监控显示,记录和分析系统中的所有串行端口活动。这是追踪应用程序或驱动程序开发,串行设备测试和优化等过程中可能出现的问题的理想方法。

博图编写温度程序_s7 smart200的CRC-16校验程序

最近做一个小项目,项目中采用485自由口通讯方式,使用一台西门子S7 smart200对一台冷水机做多个状态和温度做监控,并能对冷水机进行启停控制,和参数设置,因为冷水机的协议不是标准modbus格式,所以要自己编写通信协议。其中要用到CRC校验,在网上找了些别人写的程序,基本上用不了。只能自力更生了。首先,找到CRC校验的算法,并理解。 下面就是我找的算法(这个网上很多),1....

weixin_39539761的博客 3062

vuecli3 实现 移动端和pc端 界面切换(两套代码)

适合场景 多页面多系统应用 所有系统都在同一目录下。配置多入口多出口。每个系统之间可以链接。每个系统内依然采用Vue单页应用开发。 产品需求:一套代码 兼容pc端和移动端 , 移动端和pc端的样式布局差别很大,需要使用多界面,并判断使用手机的时候跳转移动端代码,使用pc端跳转pc端代码。 项目目录 分为两部分代码,pc 和mobile 第一步:创建一个登陆页面的文件 在项目public文件夹下创建一个login.html,其实就是将index.html复制一份,将title改一下: <!DOCTYP

你怎么也喜欢嘴巴嘟嘟 5924

yolov5部署之七步完成tensorRT模型推理加速

目录前言step 1. 下载yolov5源码以及tensorrtx源码,并将yolov5s.pt转为.wts模型step 2. 确定并下载自己准备使用的CUDA版本。step 3. 根据自己的CUDA版本下载对应版本的cuDNN以及TensorRTstep 4. 根据自己使用的VS版本下载对应版本的OpenCVstep 5. 安装CUDAstep 6. 安装cuDNN、TensorRT以及验证TensorRT是否安装成功 前言     前段时间研究了Pytorch的环境配置,之后便从github上下载了yo

Christo的博客 4万+

RISC-V CPU设计(三)---多周期CPU的设计与实现

基本情况 本多周期CPU支持RV32I指令集(fence,ecall,ebreak除外),已通过部分指令的测试,如代码有bug,欢迎指出。 模块划分 代码将CPU划分为以下几个模块: 1.控制单元:ControlUnit 用于产生控制信号,是CPU的大脑,指挥中枢。 2.分支决策单元:BranchUnit 用于决定B型指令是否发生跳转 3.立即数单元:ImmUnit 用于从指令中解析出立即数. 4.寄存器堆:RegisterFile RISC-V的32个寄存器,其中x0寄存器恒为0,不可更改。 5.指令存储

qq_40268672的博客 5543

逆向分析顶象5代各类验证码类型的图片还原方法(附源码)

6.刷新滑块验证码图片,会进入之前的for循环断点,分析此处的代码会发现,该循环循环了处理了n字符串的值,取出n字符中的值并使用charCodeAt生成Unicode 编码,然后又调用了a函数,如果a函数返回true就会把之前生成的Unicode编码+1,a函数参数分别是c数组和Unicode取余32后的值,然后再把Unicode取余32后的值push进c数组,这里的n值为滑块碎片背景图的name。2.搜索"ranges":,会找到ranges赋值的地方,在此处代码断点,并点击跳过断点,结束此次调试。

老衲爱洗头的博客 1199

Halcon那些事:Halcon非常核心的1个概念reduce_domain算子的理解和1个详细的使用示例

Reduce是减少的意思。并不是真的去裁剪图像,而是定义一个“感兴趣的区域(Region of Interest, ROI)”。后续的图像处理算子将只在这个定义的区域内有效,区域外的像素将被忽略。在一张白纸(完整图像)上放一张镂空的纸板(Domain)。我们后续的绘画(图像处理操作)只会透过镂空的部分影响到下面的白纸。镂空纸板之外的部分保持不变,也不会被处理。关键步骤:使用ReduceDomain,将图像的域限制为ROI区域,图像在原来图像基础上存在图像区域。

十多年IT经验,专注机器视觉,智能制造半导体行业 580

一文快速教你如何下载国自然模版

5. 成功进入“相关文件查看”页面后,点击左侧的“项目申请文件“,如果你此次申请的是“面上项目”,选择对应的下拉框,找到对应的模版下载即可。6. 🫑们发现,在当前页面点击“青年科学基金项目”,左侧出现的是“原国家杰出青年科学基金项目”。7. 进入下一页后,点击“青年科学基金项目”,便可以在右侧找到🫑们要找的模版啦。2. 成功登陆后,点击1处的“首页”,在首页界面,再点击2处的“项目批准”。8. 点击上图3处的“文件详情”,就可以找到可以下载的模版啦(如下图)。3. 从“项目批准”进入后,点击“管理”。

薰珞婷紫小亭子的博客 2406

基于自适应小波阈值算法的图像去噪

自适应小波阈值算法是一种基于小波变换的方法,它相对于传统的小波阈值去噪方法具有更好的性能和鲁棒性。该算法首先对图像进行小波变换,然后根据小波系数的大小确定一个自适应的阈值,将小波系数与阈值进行比较,大于阈值的系数被保留,小于阈值的系数被置零。在上述代码中,首先选取了小波函数sym4进行小波分解,然后根据标准差计算出阈值,使用wthresh函数进行阈值处理,最后进行反变换得到处理后的图像。该GUI界面与前面的自适应小波阈值算法代码结合,实现了图像的去噪,并提供了可视化的效果。

与其临渊羡鱼,不如退而结网 559

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

android 蓝牙通讯demo

android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

上一篇: 【知识点】什么是数据库?
下一篇: 【嵌入式软件工程师常用工具分享】SEGGER J-Flash
智驾
博客等级 码龄11年 6672粉丝 574原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

智驾

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值