HCIP----vlan基础实验

实验题目：hcip----vlan基础实验

实验要求：pc间能够互通

实验分析：

1.pc2/4/5/6 在同一个广播域中  .pc1/3 在同一个广播域中 

2.pc1和pc3是独立的vlan2，pc2是vlan3，pc4是vlan4，pc5是vlan5，pc6是vlan6

3.pc2和pc4/5/6 的接口是混杂（hybrid）模式

4.pc1,pc2，pc3可以访问其他所有pc，pc4、pc5不可以访问pc6，相应的pc6也不能访问其

实验拓扑：

 

 

实验内容：

1配置交换机上对应pc的端口

.[sw1]vlan batch 2 to 6

[sw1-Ethernet0/0/2]port link-type access

[sw1-Ethernet0/0/2]port default vlan 2

[sw1-Ethernet0/0/3]port hybrid

[sw1-port-group-hybrid]port hybrid u vlan 3 to 6

[sw1-Ethernet0/0/3]port hybrid pvid vlan 3

[sw2]vlan batch 2 to 6

[sw2]int e0/0/2

[sw2-Ethernet0/0/2]port link-type access

[sw2-Ethernet0/02]port default vlan 2

[sw2-Ethernet0/0/2int e0/0/3

[sw2-Ethernet0/0/3]port hybrid u vlan 3 to 5

[sw2-Ethernet0/0/3]port hybrid pvid vlan 4

[sw3]vlan batch 2 to 6

[sw3]int e0/0/2

[sw3-Ethernet0/0/2]port hybrid u vlan 3 to 5

[sw3-Ethernet0/0/2]port hybrid pvid vlan 5

[sw3-Ethernet0/0/2]int e0/0/3

[sw3-Ethernet0/0/3]port hybrid u vlan 3 6

[sw3-Ethernet0/0/3]port hybrid pvid vlan 6

2.配置交换机与交换机间的接口

[sw1]int g 0/0/4
[sw1-GigabitEthernet0/0/4]port link-type trunk
[sw1-GigabitEthernet0/04]port trunk allow-pass vlan 2 to 6

[sw2]int g0/0/1

[sw2-GigabitEthernet0/0/1]port hybrid t vlan 2 to 6

[sw2-GigabitEthernet0/0/1]int g0/0/2

[sw2-GigabitEthernet0/0/4]port link-type trunk

[sw2-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 to 6

 

3.配置网关 池塘

[sw1]int g0/0/1

[sw1-GigabitEthernet0/0/1]port hybrid t vlan 2

[sw1-GigabitEthernet0/0/1]port hybrid u vlan 3 to 6

在华为中不带标签的划归物理接口

[r1]int g0/0/0

[r1-GigabitEthernet0/0/0]ip ad 192.168.1.1 24

[r1-GigabitEthernet0/0/0]int g0/0/0.1

[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2

[r1-GigabitEthernet0/0/0.1]ip ad 192.168.2.1 24

[r1-GigabitEthernet0/0/0.1]arp broadcast enable

[r1]dhcp en

[r1]ip pool v2

[r1-ip-pool-v2]network 192.168.2.0 mask 24

[r1-ip-pool-v2]gateway-list 192.168.2.1

[r1]ip pool v3to6

[r1-ip-pool-v3to6]network 192.168.1.0 mask 24

[r1-ip-pool-v3to6]gateway-list 192.168.1.1

[r1]int g0/0/0

[r1-GigabitEthernet0/0/0]dhcp select global

[r1]int g0/0/0.1

[r1-GigabitEthernet0/0/0.1]dhcp select global

测试：

 

 

 Pc1:

 Pc4:

Pc6: