墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
200+累计阅读
231平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
API（Application Programming Interface，应用程序编程接口）指的是为不同的软件应用程序提供编程接口的一组协议、规则以及工具的集合，以便它们能够互相交互，实现数据通信和功能调用。API已成为了现代软件开发和商业应用中不可或缺的工具之一。在互联网领域尤其如此，因为API可以帮助搭建双方共赢的商业模式，促进平台的发展。
一、API接口的研发
API接口的研发通常由软件开发人员进行。在接口研发的过程中，需要对目标系统进行分析，包括数据结构、编码方式功能逻辑等，并通过编写代码将系统的数据和功能进行封装，以便其他开发者可以通过API访问和调用。此外，开发人员还需要考虑接口的安全性、稳定性、易用性等因素，确保API可以可靠地对外提供服务。
二、API接口的应用
1.Taobao API：淘宝API可以获取到淘宝平台上各种商品、类目、店铺等信息，并且能够实现下单、退款、物流等操作。
电商 API 接口：大数据时代下的机遇与挑战并存
在数字化浪潮席卷全球的今天，电子商务行业以其独特的魅力和无限潜力，成为了推动经济发展的重要力量。而作为连接商家、平台与消费者的桥梁，在大数据时代的背景下，既迎来了前所未有的发展机遇，也面临着诸多挑战。本文将深入探讨电商API接口在大数据时代下的机遇与挑战，并分析应对策略。
京东电商数据采集的三种方式|电商数据API接口实时数据采集
要实现电商的数据分析，是很重要的一环。要分几个步骤完成？每个步骤的意义是什么？每个步骤分别需要怎样的技能？今天这篇文章告诉你。电商的数据通常需要通过数据采集的方式获得。共分为三类:人工采集、报表采集、自动化抓取采集。人工采集是指运营者自己通过基本的“复制粘贴”的方式到电商平台上采集数据，其一般应用于电商的前台数据，如产品排名、介绍、评论等数据都可以通过人工采集的方式获得。人工采集的优点是无技术门槛，灵活方便；缺点是效率低下。所以此种方式一般应用于电商运营的关键领域。
如何在软件复位后保留指定RAM区域的数据
本文主要介绍S32K144的RAM retention功能
Rockchip RK3566 Buildroot SDK构建与内核编译实战指南
嵌入式Linux开发中，交叉编译环境是系统启动的基础支撑。Buildroot作为轻量级嵌入式构建框架，通过配置驱动、自动化下载和分层编译机制，显著降低定制化Linux发行版的集成门槛。其核心价值在于将内核、根文件系统与工具链统一管理，兼顾资源约束下的确定性构建与工程可复现性。典型应用场景涵盖ARM64平台（如RK3566）的固件开发、IoT设备量产镜像生成及硬件Bring-up阶段的快速验证。本文围绕Buildroot SDK全流程实践，深入解析环境搭建、Repo源码同步、离线DL库预置及内核编译等关键环节
【雷达图】R语言绘制雷达图（ggradar），NBA季后赛数据为例
一起用R语言给nba球星画球技雷达图吧！
linux入侵排查-综合日志分析
2.分析攻击者首次成功登录web管理后台的时间 还可以知道攻击者可能是通过10.2.4.11这个跳板服务器跳过来的，然后我们继续排查，可以发现日志中POST请求大多都是1047字节，然后往后大多是300字节，POST请求的响应状态码有200和302这两个，其中的302是爆破成功后持续爆破产生的日志，再1047字节和300字节中间夹着一个978字节，就是200响应和302响应的中间。7.分析攻击者留下的持久化后门的时间和后门执行情况 排查计划任务，发现有一个计划任务还是被加密的，应该是反弹shell的。
【免费】最新区块链钱包和私钥的助记词碰撞器，使用python开发
最新钱包私钥助记词碰撞器，搏一搏单车变摩托！
TI DSP从COFF切换到EABI输出格式的5个关键修改点（TMS320F280025实测）
本文基于TMS320F280025实测，详细解析了TI DSP从COFF切换到EABI输出格式的5个关键修改点。核心差异在于EABI遵循ELF标准，涉及链接器优化、RAM数据共享、工具链升级、double数据类型位宽变化及链接器命令文件重构。迁移时需使用.retain指令防止关键数据被优化，利用NOINIT段保护共享RAM，并更新hex2000等工具，以确保BootLoader与应用程序稳定运行。
将任意文件转换为Pcap网络数据包传输
一款实用的工具用于将任意文件转换为pcap网络数据包
华为Ascend_toolkit在x86ubuntu安装失败报错。[WARNING] driver package is not installed. If you install in docker
这个报错发生在交叉编译配置Ascend_toolkit环境时，安装Ascend_toolkit安装包的时候发生。[Y/N]Y。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
文档：亲测可用解决vnc灰屏，黑屏，鼠标大黑叉情况
主要解决vnc-viewer灰屏，黑屏，鼠标大黑叉等现象，详细见文档。
pscad IEEE标准系统搭建说明
pscad IEEE标准系统搭建说明，包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。
TMS_WebGMaps_1.9.8.0_Full_Source
TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
940
扫一扫
